Smeg SE32CX Manual de Usario

Smeg horno SE32CX

Lee a continuación 📖 el manual en español para Smeg SE32CX (12 páginas) en la categoría horno. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
Dear User,
we are sincerely grateful to you for purchasing one of our products.
We are sure that the appliance modern, functional and easy to use, built with the finest materials
and components will satisfy all your needs.
We would ask that you read the instructions within this booklet very carefully so as to enable you
to obtain quality results from the outsets.
The appliance must be installed only by a qualified electrician in compliance with the
instructions provided. The manufacturer declines all responsability for improper installation.
USE, INSTALLATION AND MAINTENANCE
INSTRUCTIONS FOR ELECTRICAL
BUILT-IN HOT PLATES
The manufacturer is not responsible for any transcription errors or misprints contained in this handbook and,
furthermore, reserves the right to make any modification on the products, which might be deemed
necessary or usefull, this being in the user’s interest, without altering their basic operating or safety
features.This cook top was designed to be used exclusively as a cooking appliance: any other use
(such as heating rooms) is to be considered improper and dangerous.
COD. 120116SMN1 (120116ENG) - 29.11.2011
SMEG S.p.A.
Via Leonardo da Vinci, 4
42016 GUASTALLA - ITALIA
TYPE: PFVZ 02
MOD.: SE32CX - SE32TCX
14
DESCRIPTION OF THE HOT PLATES
1 Radiant electric heating element Ø 140 mm 1200 W
2 Radiant electric heating element Ø 180 mm 1700 W
3 Switch for electric element n. 1
4 Timer control knob
5 Switch for electric element n. 2
6 Electric plate ignition warning light
TYPE: PFVZ 02
SE32TCX SE32CX
15
USE
1) ELECTRIC HOB
The hot plates are equipped with radiant heating
elements with different powers and diameters.
Cooking zones are aesily identifiables thanks to the
circles (see illustration in description) on the top;
relative powers are listed in the scheme n. 1.
On the frontal panel, close to each knob, has been
silk-screened a scheme where is indicated to which
cooking zone the knob refers (fig. 1).
In some particular models the scheme annexes a
light indicator that turns on when the cooking zone
temperature is above 60 °C (fig. 1).
The indicator will turn off only when the temperature
of the cooking zone will be below the value: this is
the reason why we call it residual heat indicator.
Some other models they have only one indicator
(see description paragraph).
Connection of electric heating elements
Heating elements are controlled by energy
regulators with 12 positions (see fig. 1) that permit
to obtain a big range of different temperatures for a
specified time adjustable by the knob of timer
(fig. 2).
In scheme 1, by way of information, we give
instructions to obtain different cooking levels.
The connection of heating elements comes after the
activation of the timer (fig. 2) turning clockwise the
relative knob.
The heating element can be connected turning
clockwise or anticlockwise the relative knob on
desired position (fig. 1).
Timer
Timer allows to heating elements to turn off
automatically by acoustic warning.
It can be used also as timer (without turning off) and
can be set for a period of max. 60 minutes.
How to use cooking zones
Heating takes place only in the inside part of the
circles drawn on the special glass.The circles have
to be wholly covered by the pots.
Attention: use the hob only
under sorveillance!
FIG. 1 FIG. 2

Especificaciones del producto

Marca: Smeg
Categoría: horno
Modelo: SE32CX

¿Necesitas ayuda?

Si necesitas ayuda con Smeg SE32CX haz una pregunta a continuación y otros usuarios te responderán




horno Smeg Manuales

horno Manuales

Últimos horno Manuales