Smeg SIMU536B Manual de Usario

Smeg horno SIMU536B

Lee a continuación 📖 el manual en español para Smeg SIMU536B (9 páginas) en la categoría horno. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/9
W10818570A
30" (76.2 CM) AND 36" (91.4 CM)
ELECTRIC INDUCTION COOKTOP
INSTALLATION INSTRUCTIONS
INSTRUCTIONS D’INSTALLATION DE
LA TABLE DE CUISSON ÉLECTRIQUE
À INDUCTION DE
30" (76,2 CM) ET DE 36" (91,4 CM)
COOKTOP SAFETY 2 .................................................................
INSTALLATION REQUIREMENTS 3 ..........................................
Tools and Parts 3 ....................................................................
Location Requirements 3 .......................................................
Electrical Requirements 5 .......................................................
INSTALLATION INSTRUCTIONS 5 ...........................................
Prepare Location 5 .................................................................
Install Brackets 5 .....................................................................
Install Cooktop 6 .....................................................................
Make Electrical Connection ................................................. 7
Complete Installation 8 ...........................................................
SÉCURITÉ DE LA TABLE DE CUISSON 9 ................................
EXIGENCES D’INSTALLATION 10 ...........................................
Outillage et pièces 10 .............................................................
Exigences d’emplacement 10 .................................................
Spécications électriques 12 ..................................................
INSTRUCTIONS D’INSTALLATION 13 .....................................
Préparation de l’emplacement 13 ..........................................
Installation des supports 13 ...................................................
Installation de la table de cuisson 14 .....................................
Raccordement électrique 14 ...................................................
Achever l’installation 15 ..........................................................
Table of Contents/ Table des matières
IMPORTANT:
Sa
ve for local electrical inspector's use.
IMPOR
TANT :
À conser
ver pour consultation par l'inspecteur local des installations électriques
.
Para obtener acceso al instrucciones de instalación en español, o para obtener información adicional acerca de su producto, visite:
www.smegusa.com
2
COOKTOP SAFETY
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
3
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Tape measure
Flat-blade screwdriver
Phillips head screwdriver
Hand or electric drill
Level
Parts supplied
Brackets (2)
2¹⁄2" (6.4 cm) clamping screws (4)
#8 x ³⁄8" (9.5 mm) sheet metal screws (4)
Parts needed
A UL listed or CSA approved strain relief
UL listed wire connectors
A UL approved junction box or 240V outlet
Cooktop Bracket Adhesive Kit Part Number W10310006
if installing the cooktop into a marble countertop. See the
“Assistance or Service” section of the Use and Care Guide
for information on ordering.
Check local codes. Check existing electrical supply. See
“Electrical Requirements.”
It is recommended that all electrical connections be made by a
licensed, qualified electrical installer.
Location Requirements
Make sure you have everything needed for correct installation. It
is the responsibility of the installer to comply with the installation
clearances specified in these instructions.
IMPORTANT: Observe all governing codes and ordinances.
When installing cooktop, use minimum dimensions given.
To eliminate the risk of burns or fire by reaching over the
heated surface units, cabinet storage space located above
the surface units should be avoided. If cabinet storage is to
be provided, the risk can be reduced by installing a range
hood that projects horizontally a minimum of 5” (12.7 cm)
beyond the bottom of the cabinets.
It is the installer’s responsibility to comply with installation
clearances specified on the model/serial rating plate. The
model/serial rating plate is located on the underside of the
cooktop burner box.
A.Model/serial rating plate location
Marker or pencil
Pliers
¼" drill bit
Jigsaw
30" (76.2 cm) cooktop model/serial rating plate
location (model SIMU530)
36" (91.4 cm) cooktop model/serial rating plate
location (model SIMU536)
A.Model/serial rating plate location
Check the cooktop base for an approved installation label.
Verify approved oven model numbers that can be installed
with your cooktop model number. If you do not find this
label, your cooktop may not be approved for use over an
undercounter built-in oven. Contact your dealer to confirm
that your cooktop is approved.
Ovens approved for this type of installation will have an
approval label located on the top of the oven. If you do
not find this label, contact your dealer to confirm that your
oven is approved. Refer to oven manufacturers Installation
Instructions for approval for built-in undercounter use and
proper cutout dimensions.
When installing cooktop over an undercounter built-in oven,
do not fasten cooktop to countertop with clamps or seal
cooktop to countertop. This will make the cooktop easier to
remove if future servicing becomes necessary.
Use the countertop opening dimensions that are given
with these Installation Instructions. Given dimensions are
minimum clearances and provide 0” (0 cm) clearance.
Grounded electrical supply is required. See “Electrical
Requirements” section.
A
A

Especificaciones del producto

Marca: Smeg
Categoría: horno
Modelo: SIMU536B

¿Necesitas ayuda?

Si necesitas ayuda con Smeg SIMU536B haz una pregunta a continuación y otros usuarios te responderán




horno Smeg Manuales

horno Manuales

Últimos horno Manuales