Speco Technologies SP5NXCTUL Manual de Usario

Lee a continuación 📖 el manual en español para Speco Technologies SP5NXCTUL (1 páginas) en la categoría Vocero. Esta guía fue útil para 12 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
Frame Construction Ceiling Installation
1
3
Replace the top cover and tighten the screws.
Insert the speaker through the bottom of the hole in
the ceiling.
4
5
Loosen the four screws on the front baffle(counter
clockwise) 1/2 turn. Then tighten the screws (clockwise)
until the dog legs clamp the speaker to the ceiling.
Do not over tighten screws.
Connect a secondary support line from the seismic tab to a
secure support point. Set the rotary tap selector and install
the speaker grille.
Specifications:
2
CAUTION
Adjusting the Tap Selector
Seismic Tab &
Supprot Line
Ceiling Speaker
User Guide
Cut Material
Remove the top cover to access the speaker connector.
Attack the speaker wires to the 4-pole captive screw
connector. Insert the 4-pole captive
screw plug into the connector on back of the speaker.
Install the conduit and secure the connections.
68-1065-01 Re v. B
06 06
Acoustic & Electrical
General
Speaker type
..................................... 2-w ay, ceiling speaker with metal back can
Frequency range
............................. 70 Hz to 20 kHz,
Power handling
................................. 40 Watts RMS
Nominal sensitivity......................... 88 dB, 1W@1m
Nominal coverage angle
............. 110° conical coverage
Nominal impedance...................... 8 ohms
Transformer taps........................... 70V: 10W, 5W, 2.5W, 1.3W, .63W, 8 ohms
100V: null, 10W, 5W, 2.5W, 1.3W, 8 ohms
Woofer................................................ 5.25" (131 mm) polypropylene cone
with moisture resistant coating
Tweeter............................................... 3/4" (19 mm) silk dome
Overload protection....................... Full range power limiter with the 8 ohm direct
input only, protecting the tweeter, woofer, and
crossover.
Temperature/humidity .................. Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Listings................................................
UL1480
Compliances.....................................
CE
Warranty ............................................. Limited lifetime warranty*
NOTE: All nominal level are at ±10%.
NOTE: Specifications are subject to change without notice.
NOTE: Please see warranty card for full details.
Parallel Hookup Wiring Diagram
Apply 4 pieces of black putty
(supplied),equally spaced 90°
apart, to the upper inside
edge of the grille.
Conduit
Enlarged to
Show Detail
Cover
4-pole Captive
Screw Connector
From
Power
Amplifier
Trace template.
To Speaker
THRU
THRU
10
10
2.5
5
5
.63
1.3
70V
2.5
100V
1.3
,s
Take the cutout template from the packaging box and
punch out along the larger perforated circle. Place
the cutout template against the bottom of the ceiling and
trace the inside of it. Carefully cut out the ceiling material
along the circle.
80 Watts PEAK
SP5NXCTUL
Power Amplifier Speaker 1 Speaker 2 Speaker 3
To Speakers

Especificaciones del producto

Marca: Speco Technologies
Categoría: Vocero
Modelo: SP5NXCTUL

¿Necesitas ayuda?

Si necesitas ayuda con Speco Technologies SP5NXCTUL haz una pregunta a continuación y otros usuarios te responderán




Vocero Speco Technologies Manuales

Vocero Manuales

Últimos Vocero Manuales