Speco Technologies VLD1A Manual de Usario

Lee a continuación 📖 el manual en español para Speco Technologies VLD1A (10 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/10
User Manual
All- - One CameraIn
VLD1A
Version 0.11.
i
Table of Contents
1 General Introducon .................................................................1
1.1 Features ...........................................................................1
2 Device Framework .....................................................................2
3 Installaon .................................................................................3
ii
Welcome
Thank you for purchasing our All in One camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this
product!
Please keep this user manual for future reference!
Important Safeguards and Warnings
1 Electrical safety
All installaon and operaon here should conform to your local electrical safety
codes.
Please check if the power supply is correct before operang the device.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage)
and the Limited power source is rated DC 12V or AC24V in the IEC60950-1. (Power
supply requirement is subject to the device label).
Please install easy- -use device for power o before installing wiring, which is for to
emergent power o when necessary.
Please prevent the line cord from being trampled or pressed, especially the plug,
power socket and the juncon from the device.
Note: Do not connect these two power supplying sources to the device at the
same me; it may result in device damage!
We assume no liability or responsibility for all the res or electrical shock caused by
improper handling or installation.
We are not liable for any problems caused by unauthorized modicaon or
aempted repair.
2 Environment
Please don’t aim the device at strong light (such as lighng, sunlight and so on) to
focus; otherwise it may cause overexposure (It is not the device malfuncon), which
will aect the longevity of CCD or CMOS.
Please transport, use and store the device within the range of allowed humidity and
temperature.
Please don’t keep the device in a place which is wet, dusty, extremely hot, and
extremely cold and with strong electromagnec radiation or unstable lighng.

Especificaciones del producto

Marca: Speco Technologies
Categoría: Cámara de vigilancia
Modelo: VLD1A

¿Necesitas ayuda?

Si necesitas ayuda con Speco Technologies VLD1A haz una pregunta a continuación y otros usuarios te responderán




Cámara de vigilancia Speco Technologies Manuales

Cámara de vigilancia Manuales

Últimos Cámara de vigilancia Manuales