Speco Technologies VLD9 Manual de Usario

Lee a continuación 📖 el manual en español para Speco Technologies VLD9 (8 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
USER MANUAL
Thank you for purchasing our product. Speco Technologies is constantly developing and
improving products. We reserve the right to modify product design and specifications
without notice and without incurring any obligation.
VLD9 /VLD9M
1
Warnings
If the product does not work p rop erly, please con tact the dealer or where the product was purchased.
Speco Tech nologies is not responsible for any pro blems caused by improper operation or repair.
Do not expose th e unit to heav y stress, violent vibration or long-term exposure to water and humid ity
during transportation, storage, and/or installation.
Do not install near sou rces o f heat.
Only ins tall the product in environments inside the specification operating temperature and humidity
rang e.
Do not install the camera near power lines, radar equipment or other electro magnetic radiatio n.
Do not block any ventilatio n op enings if any.
Use all the weatherproofing hardware requ irement to minimize weather intrusion .
This camera series is th e latest techno logy and advanced circuit design, which features high definition and
sensitiv ity, low noise and distortion and supp orts HD vid eo tran s mission with the common coaxial cable,
ensu ring the requirement of th e HD mo nitoring in the traditio nal surveillan ce sy stem.
Introduction
Hig h Reso lution
Adopt high performance senso r, providing high definition and clear image.
Hig h Transmission Performance
Real time transmission with high sp eed and lon g distance- .
DNR
Reduce noise from brightness and co lor sig nal .
OSD
Access the camera settings which can be clearly disp lay ed through the main menu.
White Balance
Adju st the color temperature according to the en vironment automatically.
AGC
Adju st the gain of amplifier, enabling the camera to output the stan d ard video sign al in different
ligh ting condition.
Backlight Compensation BLC ( )
When the back of the captured object is too much bright, you can set BLC for the captured object to
mak e it clearer.
Backlight Compensation BLC ( )
When the back of the captured object is too much bright, you can set BLC for the captured object to
make it clearer.
Cables
Power Cable
Video Output
Video Switch Cable
Video Switch: Four video output modes can be optional--AHD, TVI, CVI and CVBS
(a) remove the cover of the video switch cable; (b) hold and press the button in the video
switch cable for 5 seconds to switch the current video output.
2
Before you start, please make sure that the wall or ceiling is s tro ng en ou gh to w ith st and t hre e ti mes
th e w eig ht o f t he camera. Please install and use the camera in the dry environment.
Youd better install back the lens cover or lower dome less than 4 hours after removing it.
The mounting types of cameras are only for reference.
Installation
Mounting for VLD9
1. Drill the screw holes and the cable hole on the wall according to the drill template.
74.3
74.3
(mm)

Especificaciones del producto

Marca: Speco Technologies
Categoría: No categorizado
Modelo: VLD9

¿Necesitas ayuda?

Si necesitas ayuda con Speco Technologies VLD9 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Speco Technologies Manuales

No categorizado Manuales

Últimos No categorizado Manuales