StarTech.com 11050-PC-SERIAL-CARD Manual de Usario

StarTech.com No categorizado 11050-PC-SERIAL-CARD

Lee a continuación 📖 el manual en español para StarTech.com 11050-PC-SERIAL-CARD (2 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: March 24, 2022

Product Diagram (11050-PC-SERIAL-CARD)

Port/LED/

Connector Function

1Bracket • Used to secure the card on the Host Computer

2Activity LEDs • Receive and transmit LEDs illuminate green when

there’s activity

3Serial Port DB-9 • Connect Serial Peripheral Devices

4J2 Jumpers • Used to or power output. The Enable Disable Pin 9

default position is . Disable

5J5 Power

Connector

• Optional: connect the Host Computer Power Supply

(4 Pin SP4/Floppy power connector) to Provide Power

over PIN 9

6J3 Jumper

• Optional: used to change the voltage output of Pin 9

• PCI12V 12V draws power from the PCIe slot. Outputs

• AUX12V J5 Power Connector. draws power from the

Outputs 12V

• AUX5V J5 Power Connector. draws power from the

Outputs 5V

7PCIe 2.0 p1-x1

Connector • Insert into a on thePCI Express Slot Host Computer

1-Port PCI Express Serial Card with COM Port Activity LEDs - 16C1050 UART

Package Contents

• Serial Parallel PCI Express Card x1

• Low-Prole Bracket x1

• Quick-Star Guide x1

Requirements

For the latest requirements, please visit www.startech.com/11050-PC-SERIAL-CARD

• Computer with an available PCI Express Slot (x1, x4, x8, or x16)

Installation

Install the PCI Express Card

WARNING!

PCI Express Cards can be severely damaged by static electricity. Ensure that you

are properly grounded before you open your or touch the Computer Case PCI

Express Card Anti-Static Strap . You should wear an when you install any computer

component. If an isn’t available, discharge any built-up static Anti-Static Strap

electricity by touching a large for several seconds. Only Grounded Metal Surface

handle the by its edges and don’t touch the gold connectors.PCI Express Card

1. Turn o your and any that are connected to it (for Computer Peripheral Devices

example, , , .).Printers External Hard Drives etc

2. Unplug the from the back of your .Power Cable Computer

3. Disconnect any that are connected to your .Peripheral Devices Computer

4. Remove the from your . Consult the documentation that Cover Computer Case

came with your for details about how to do this safely.Computer

5. Locate an open and remove the corresponding PCI Express Slot Slot Cover Plate

from the back of your . Consult the documentation that came with Computer Case

your for details about doing this safely. This card works in PCI Express x1, Computer

x4, x8, or p1-x16 slots.

6. Gently insert the into the open and fasten the PCI Express Card PCI Express Slot

Bracket Computer Case to the back of the .

Note: If you install the into a or a PCI Express Card Small Form Factor Low-Prole

Desktop System Full-, it may be necessary to replace the pre-installed standard

Height Bracket Low-Prole Bracketwith the included .

3. Conrm that the is installed and working as expected.Driver

Verify Driver Installation (Linux)

1. Run from the command line.lsmod | grep r8125

2. Verify that the is present in the command line. Driver

7. To provide power over connect a from Pin 9, 4 Pin SP4/Floppy power connector

the to the on the card.Host Computer Power Supply J5 Power Connector

a. To set the desired voltage, or , insert the jumper cap on the corresponding 5V 12V

labeled 2-pin connector on the . J3 Jumper

Note: Verify the supports additional voltage on before Serial Peripheral Device Pin 9

making changes. Severe damage to the equipment can occur.

8. Change the jumper caps of both from (disabled) to J2 Jumpers DIS Pins 1-2 PWR

(power) . Pins 2-3

9. Return the onto your .Cover Computer Case

10. Reconnect the to the back of your .Power Cable Computer

11. Reconnect all of the that were disconnected in .Peripheral Devices Step 3

12. Turn on your .Computer

Install the Driver

1. Navigate to www.startech.com/11050-PC-SERIAL-CARD

2. Click the tab.Drivers/Downloads

3. Under , download the for your operating system.Driver(s) Driver Package

4. Open the and locate the corresponding folder for theDriver Package Operating

System Version.

5. Execute the to install the driver package to your computer.Setup File

Verify Driver Installation (Windows)

1. Navigate to the .Device Manager

2. Under , right-click and Ports (COM & LPT) AX99100 PCIe to High Speed Serial Port

click . Properties

Regulatory Compliance

FCC - Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could

void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .

www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss

of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the

limitations or exclusions contained in this statement may not apply to you.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Crescent

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Road

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Especificaciones del producto

Marca:	StarTech.com
Categoría:	No categorizado
Modelo:	11050-PC-SERIAL-CARD

¿Necesitas ayuda?

Si necesitas ayuda con StarTech.com 11050-PC-SERIAL-CARD haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

No categorizado StarTech.com Manuales

StarTech.com S322SAT3R Manual de Usario

23 Octubre 2024

StarTech.com 25S22M2NGFFR Manual de Usario

23 Octubre 2024

StarTech.com CABSHELFV2U-12-RACK Manual de Usario

23 Octubre 2024

StarTech.com 35FCREAD20BK Manual de Usario

23 Octubre 2024

StarTech.com 25SAT22MSAT Manual de Usario

23 Octubre 2024

StarTech.com 2CF2SATAR Manual de Usario

23 Octubre 2024

StarTech.com 35FCREADREM Manual de Usario

23 Octubre 2024

StarTech.com 35BAYCF2IDE Manual de Usario

23 Octubre 2024

StarTech.com PATA2SATA2 Manual de Usario

22 Octubre 2024

StarTech.com MSAT2SAT3 Manual de Usario

22 Octubre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024

Philips 43PUL7672 Manual de Usario

27 Octubre 2024

Manhattan 461504 Manual de Usario

27 Octubre 2024

Sungrow SG125HV Manual de Usario

27 Octubre 2024

Schneider CCT724319 Manual de Usario

27 Octubre 2024

Technoline WS 250 Manual de Usario

27 Octubre 2024

Livarno IAN 354423 Manual de Usario

27 Octubre 2024

Kupper 12152 Manual de Usario

27 Octubre 2024

JennAir CARBON24L Manual de Usario

27 Octubre 2024