StarTech.com HDVGADP2HD Manual de Usario

StarTech.com Audio/video-converter HDVGADP2HD

Lee a continuación 📖 el manual en español para StarTech.com HDVGADP2HD (15 páginas) en la categoría Audio/video-converter. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/15

Manual Revision: 07/11/2017

For the latest information, technical specications, and support for

this product, please visit www.startech.com/HDVGADP2HD

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

HDVGADP2HD

HDMI®, VGA and DP to HDMI Converter

Switch - 4K

*actual product may vary from photos

Instruction manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

Industry Canada Statement

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (A)/NMB-3(A)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction manual

Table of Contents

Switch diagram ................................................................................................... 1

Front view 1 ....................................................................................................................................................

Rear view 2 ......................................................................................................................................................

Introduction ......................................................................................................... 3

Packaging contents 3 ..................................................................................................................................

System requirements 3 ...............................................................................................................................

Installation ............................................................................................................ 4

Operation ..............................................................................................................5

Mode selection and switch operation 5 ...............................................................................................

VGA screen shifting 6 ..................................................................................................................................

Manual operation with serial control 7 .................................................................................................