StarTech.com SDOCKU313 Manual de Usario

StarTech.com Base/estación de acoplamiento SDOCKU313

Lee a continuación 📖 el manual en español para StarTech.com SDOCKU313 (2 páginas) en la categoría Base/estación de acoplamiento. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Quick start guide

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 06/17/2016

Packaging contents

• 1 x USB 3.1 dock for SATA drives

• 1 x USB 3.1 A-to-B cable

• 1 x universal adapter

• 4 x power adapter plug (NA/UK/EU/AUS)

• 1 x instruction manual

For the latest information, technical specications, and support for

this product, please visit www.startech.com/SDOCKU313.

System requirements

• USB-enabled computer system with an available USB port

• 2.5 in. or 3.5 in. SATA HDD or SSD

Note: To obtain the maximum USB throughput, StarTech.com

recommends that you use a PC with a USB 3.1 Gen 2 port.

Operating systems are subject to change. For the latest

requirements, please visit www.startech.com/SDOCKU313.

SDOCKU313

USB 3.1 (10 Gbps) dock for SATA drives

Product overview

Front view

Power button

Power and activity

LED

Drive slot Drive eject

button

Rear view

USB 3.1 type-B

connector (host)

DC power

connector *actual product may vary from photos

Install the drive

Warning! Hard drives and storage enclosures should be handled

carefully, especially when they’re transported. If you’re not careful

with your hard disk, you may lose data as a result. Always handle

storage devices with caution.

1. Connect the external power adapter from the drive dock to a

power outlet.

2. Insert a 2.5 in. or 3.5 in. drive into the drive slot on the top of the

docking station. Make sure that the connectors on the drive are

facing the same corner of the slot that has a cutout in the door.

The label on the drive should face the front of the dock.

3. Connect the included USB 3.1 cable from the drive dock to an

available USB port on your computer system. Your computer can

be turned on or turned o when you connect the USB cable.

4. Press the button on the top of the drive dock. The LED Power

under the power button should light up to indicate that the dock

is powered on. The LED blinks when the drive is being accessed.

Prepare the drive

If you install a hard drive or solid-state drive that already has data

on it, after you plug in the drive, it appears under or My Computer

Computer with a drive letter assigned to it.

If you install a brand-new drive that doesn’t contain any data, you

must prepare the drive for use.

If you use a computer that’s running Windows® 2000, Windows® XP,

Windows Vista®, or Windows® 7, do the following:

1. Depending on the OS version that you’re running, do one of the

following:

• On your desktop, right-click .My Computer

• On your desktop, right-click .Computer

2. Click .Manage

3. On the Computer Management Disk Management screen, click .

4. Locate the disk that is labeled . To conrm that the Unallocated

drive is the correct one, check the drive capacity.

5. Right-click the section of the window that says and Unallocated

click New Partition.

6. To set up the drive, complete the instructions in the New

Partition wizard.

When the drive is successfully installed, the disk appears under My

Computer Computer or with a drive letter assigned to it.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his own expense.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

Industry Canada Statement

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (A)/NMB-3(A)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

About driver installation

No driver or software installation is required for this product because

the hard drive dock is natively supported and the drivers are already

installed.

Remove the drive

Note: Make sure that the drive isn’t being accessed by the computer

before you proceed.

1. To remove the disk drive from the operating system, do one of the

following:

• On computers running a version of Windows, click Safely

Remove Device.

• On computers running a version of Mac OS, drag the drive to