StarTech.com SLSODDU33B Manual de Usario

StarTech.com No categorizado SLSODDU33B

Lee a continuación 📖 el manual en español para StarTech.com SLSODDU33B (2 páginas) en la categoría No categorizado. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

I T: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

P T: Guia do usuário - pt.startech.com

Manual Revision: 01/16/2015

For the most up-to-date information, please visit: www.startech.com

Quick Install Guide

Packaging Contents

• 1 x USB 3.0 to slimline SATA ODD enclosure

• 1 x USB 3.0 cable

• 1 x Quick start guide

System Requirements

• Computer system with available USB port

• 12.5mm Slimline SATA optical disc drive (ODD) (e.g. Blu-ray-RW,

DVD-RW, etc.)

SLSODDU33B

USB 3.0 to Slimline SATA Optical drive Enclosure

*actual product may vary from photos

Tool Requirements

• 1 x Phillips head screw driver

Installation

WARNING! ODD drives, media and enclosures require careful

handling, especially when being transported. If you are not careful

with your equipment damage may result. Always handle your hard

devices with caution. Be sure that you are properly grounded by

wearing an anti-static strap when handling computer components

or discharge yourself of any static electricity build-up by touching a

large grounded metal surface (such as the computer case) for several

seconds.

1. Using a Phillip’s head screw driver, remove the two ODD bay

access screws, from the back of the enclosure releasing the plastic

bezel.

2. Remove the plastic bezel and slide the drive tray from the front of

the enclosure.

3. Slide your slimline ODD into the drive tray from the front,

ensuring the SATA plug on your ODD is in line with the SATA

reciprocal on the back of the tray.

4. Ensure your ODD is rmly seated, then use your Phillip’s head

screw driver with the provided screws to secure the drive to the

tray using the mounting points on the side of the drive and tray.

5. Slide the assembled drive tray back into the enclosure housing.

6. Replace the plastic rear bezel and fasten using the previously

removed ODD bay access screws.

7. Using the included USB 3.0 cable, connect the enclosure to

an available USB port on the host computer system. No driver

software will install automatically once the operating system is

launched.

Product Overview

Front View

Rear View

ODD bay

USB 3.0

Micro B port

ODD bay

access screw

ODD bay

access screw

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a one year warranty.

In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be

returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages

arising from misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.