StarTech.com USB2001EXT2P Manual de Usario

StarTech.com No categorizado USB2001EXT2P

Lee a continuación 📖 el manual en español para StarTech.com USB2001EXT2P (9 páginas) en la categoría No categorizado. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/9

Manual Revision: 02/15/2017

For the latest information, technical specications, and support for

this product, please visit www.startech.com/USB2001EXT2P.

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

USB2001EXT2P

1-Port USB 2.0-Over-Cat5-or-Cat6 Extender Kit - Locally

or Remotely Powered

*actual product may vary from photos

Instruction manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

EU Declaration of Conformity

We, StarTech.com, declare under our sole responsibility that the USB2001EXT2P to

which this declaration relates, is in conformity with European Standard EN 55022, EN

61000, and EN 55024.

WEEE Statement

The European Union has established regulations for the collection and recycling

of all waste electrical and electronic equipment (WEEE). Implementation of WEEE

regulations may vary slightly by individual EU member states. Please check with your

local and state government guidelines for safe disposal and recycling or contact your

national WEEE recycling agency for more information.

Industry Canada Statement

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (A)/NMB-3(A)

Instruction manual

Table of Contents

Product operation and storage ............................................................1

Introduction ............................................................................................ 1

Packaging contents ...............................................................................1

Requirements .........................................................................................1

Product diagram ....................................................................................2

Front view 2 ....................................................................................................................................................

Rear view 2 ......................................................................................................................................................

LED indicators ......................................................................................... 3

Mode button and Conguration port ................................................. 3

Installing the extender .......................................................................... 3

Install the extender................................................................................................................................... 4

Installation notes 4 .......................................................................................................................................

Technical support ...................................................................................5

Warranty information ............................................................................ 5