StarTech.com VGA2VID2 Manual de Usario

StarTech.com Convertidor de audio/video VGA2VID2

Lee a continuación 📖 el manual en español para StarTech.com VGA2VID2 (2 páginas) en la categoría Convertidor de audio/video. Esta guía fue útil para 13 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: October 29, 2019 9:46 AM

Product Diagram (VGA2VID2)

Front and Side Prole

Rear and Side Prole

Component Function

1PAL/NTSC Switch • Select the video output Display Device

standard

2VGA Input Port • Connect a VGA Video Source Device

3Scan Button

• Fix underscan (video does not ll the ) Display

and overscan (video is cut o around the

edges of the )Display

• 7 Image adjustments available

4Power Port • Connect a USB Power Source

VGA to S-Video and Composite Video Converter

5Composite Video Output Port • Connect a Composite Video Display Device

6S-Video Output Port • Connect an S-Video Display Device

Requirements

For the latest requirements, please visit . www.startech.com/VGA2VID2

• VGA Video Source Device x 1

• VGA Cable x 1

• Composite Video or S-Video Display Device x 1

• Composite Video or S-Video Cable x 1

• USB Power Source x 1

Installation and Operation

1. Ensure all of the are powered o.Devices

2. Toggle the to match your video output standard. PAL/NTSC Switch Display Device

Note: NTSC is the standard in North America and some parts of South America.

3. Connect a to the and to Composite Video Cable Composite Video Output Port

the . Composite Video Display Device

Connect an to the and to the S-Video Cable S-Video Output Port S-Video Display

Device.

4. Connect a to the on the and to the VGA Cable VGA Input Port Video Converter

VGA Video Source Device.

5. Connect the to an available and to USB-A to USB Mini Cable USB Power Source

the .Power Port

6. Power on the and .Source Display Devices

7. If the video on the is too large or too small: press the until the Display Scan Button

desired aspect ratio is met and the video lls the .Display

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void

the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

Especificaciones del producto

Marca:	StarTech.com
Categoría:	Convertidor de audio/video
Modelo:	VGA2VID2
Color del producto:	Geborsteld staal
Ancho:	873 mm
Profundidad:	513 mm
Altura:	235 mm
Manual de usuario:	Ja
Ancho del compartimento de instalación:	840 mm
Profundidad del compartimento de instalación:	480 mm
tipo de fregadero:	Opbouwwasbak
Fregadero de forma:	Rechthoekig
Material del fregadero:	Roestvrijstaal
Número de lavabos:	1 kommen
Formar el primer fregadero:	Rechthoekig
Dimensiones del primer recipiente (WxL):	720 x 320 mm
Primero viene la profundidad:	200 mm
Kraangat:	Ja
Número de orificios para grifos:	1
Encimera:	Nee
Grifo incluido:	Nee
Tamaño del fregadero:	3.5 "