StarTech.com VSEDIDHD Manual de Usario

StarTech.com Convertidor de audio/video VSEDIDHD

Lee a continuación 📖 el manual en español para StarTech.com VSEDIDHD (2 páginas) en la categoría Convertidor de audio/video. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Quick start guide

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 04/07/2016

For the latest information, technical specications, and support for

this product, please visit www.startech.com/VSEDIDHD.

Packaging contents

• 1x EDID emulator

• 1x USB power cable

• 1x screwdriver

• 4x foot pads

• 1x quick start guide

System requirements

• 1x HDMI display device, such as a monitor or projector, with

cabling

• 1x HDMI video source device, such as a computer, with cabling

• 1x USB port (power)

• 2x HDMI cables (For display device and video source device)

VSEDIDHD

EDID Emulator for HDMI® Displays

About this product

When a video source is connected to a display, EDID information is

shared between devices to ensure optimal video performance.

However, if you are using a third party device, such as a video

extender, between your source and display, the EDID information

may not pass through correctly.

The emulator lets you clone or emulate the EDID settings from

your display and deliver it to your video source to ensure proper

signaling between your devices.

EDID cloning

To clone (copy) the EDID settings from your display:

1. If your video source is a computer system, set the mode switch on

the EDID emulator to . PC mode

If your video source is consumer electronics equipment such as a

Blu-ray™ or DVD player, set the mode switch on the EDID emulator

to A/V mode.

2. If your video source is HDMI, use the included screw driver to set

dip switches 1 through 6 in the OFF position (down).

If your video source is DVI (with an HDMI adapter) set dip switches

1 through 5 in the OFF position (down), while dip switch 6 is set in

the ON position (up).

3. Use the included screwdriver, to set the rotary dial on the EDID

emulator to position 1.

4. Connect the USB power cable to the Power port on the EDID

emulator and to a USB power source.

5. Connect an HDMI cable (not included) to your display device and

to the HDMI output port on the EDID emulator.

Product overview

Front view

Rear view

HDMI output port

HDMI input portPower port Mode switch

*actual product may vary from photos

Side view

Rotary switch

Dip switches

Program button

Status LED

Download the full instruction manual at

www.StarTech.com/VSEDIDHD

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

6. Press and hold the program button on the EDID emulator

until the LED starts to ash green. When you release the Status

program button, the LED will then ash green and red alternately,

indicating that the EDID emulator is actively copying the display’s

EDID settings.

7. When the Status LED lights blue, the EDID copy process has

successfully completed.

8. Disconnect the EDID emulator from your display and reconnect

your display to the video output on the third-party equipment

that is causing the disruption.

9. Connect an HDMI cable (not included) to your video source and

to the HDMI input port on the EDID emulator.