Steren K-800 Manual de Usario

Lee a continuación 📖 el manual en español para Steren K-800 (69 páginas) en la categoría No categorizado. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/69
ENGLISH
ENGLISH-02
DO’s AND DON’Ts OF BUILDING CIRCUITS
After building the circuits given in this booklet, you may wish to
experiment on your own. Use the projects in this booklet as a guide, as
many important design concepts are introduced throughout them. Every
circuit will include a power source (the batteries), a resistance
(which might be a resistor, lamp, motor, integrate circuit, etc.), and
wiring paths between them and back. You must be careful not to create
“short circuits” as this will damage components and / or quickly drain
the batteries. Only connect the ICs using con gurations given in the
projects, incorrectly doing so may damage them.
Steren is not responsible for parts damaged due to incorrect wiring.
Always use eye protection when experimenting on your own.
Always include at least one component that will limit the current
through a circuit, such as the speaker, lamp, capacitors, motor,
microphone, etc.
Always disconnect the batteries immediately and check your wiring
if something appears to be getting hot.
Always check your wiring before turning on a circuit.
Never leave a circuit unattended when it is turned on.
Never touch the motor when it is spinning at high speed.
Before using your new Electronic Snap Circuits, please read this
instruction manual to prevent any damage. Put it away in a safe
p
lace for future references
.
ENGLISH
ENGLISH-03
WARNING
SHOCK HAZARD
Never connect snap circuits to the electrical outlets in
your home in any way!
HOW TO USE THE PARTS
The snap circuit kit uses building blocks with snaps to build the
dierent electrical and electronic circuits in the projects. Each block has
a function: there are switch blocks, lamp blocks, battery blocks, dierent
length wire blocks, etc.
These blocks are indierent colors and have numbers on them so that
you can easily identify them.
The circuit you will build is shown in color and numbers, identifying the
blocks that you will use and snap together to form a circuit.
For example:
This is the switch block which is green and has the marking on it.

Especificaciones del producto

Marca: Steren
Categoría: No categorizado
Modelo: K-800

¿Necesitas ayuda?

Si necesitas ayuda con Steren K-800 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Steren Manuales

No categorizado Manuales

Últimos No categorizado Manuales