Supermicro MBD-X8DAE-B Manual de Usario

Supermicro Placa madre MBD-X8DAE-B

Lee a continuación 📖 el manual en español para Supermicro MBD-X8DAE-B (91 páginas) en la categoría Placa madre. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/91

X8DA6

USER’S MANUAL

Revision 1.1

X8DAE

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Manual Revision 1.1

Release Date: Feb. 15, 2011

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

manufacturer’s instruction manual, may cause interference with radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, you are encouraged to try to correct the interference by one or more

of the following measures: Reorient or relocate the receiving antenna. Increase the separation

between the equipment and the receiver. Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected. Consult the dealer or an experienced radio/television

technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About This Manual

This manual is written for system integrators, PC technicians and knowledgeable

PC users. It provides information for the installation and use of the X8DA6/

X8DAE motherboard.

About This Motherboard

The X8DA6/X8DAE supports the Intel 5500/5600 Series Processor

platform, the ﬁ rst dual-processing platform that implements the Intel QuickPath

Interconnect (QPI) Technology and provides the next generation point-to-point

system interface, replacing the current Front Side Bus. With the 5500/5600 Series

Processor platform built in, the X8DA6/X8DAE substantially enhances system

performance with increased bandwidth and unprecedented scalability optimized

for CAD workstations and graphic-intensive systems. Please refer to our web site

(http://www.supermicro.com/products/) for updates on supported processors. This

product is intended to be installed and serviced by professional technicians.

Manual Organization

Chapter 1 describes the features, speciﬁ cations and performance of the mother-

board and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes trouble-Chapter 3

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to BIOS and provides detailed information on

running the CMOS Setup utility.

Appendix A lists BIOS POST Error Codes and . Appendix B Appendix C provide

the Windows OS and Other Software Installation Instructions.

Conventions Used in the Manual

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Warning: Important information given to ensure proper system installation

or to prevent damage to the components.

Note: Additional Information given to differentiate various models or to

ensure correct system setup.

iii

Preface

Especificaciones del producto

Marca:	Supermicro
Categoría:	Placa madre
Modelo:	MBD-X8DAE-B
Color del producto:	Zwart
Peso.:	49500 g
Ancho:	85.7 mm
Profundidad:	1709.1 mm
Altura:	1019.5 mm
Peso del embalaje:	63850 g
Ancho del embalaje:	1143 mm
Empaquetadura en profundidad:	1953 mm
Altura del embalaje:	1270 mm
Manual de usuario:	Ja
Sistemas operativos móviles compatibles:	Android, iOS
Diagonal de la pantalla:	75 "
Pantalla táctil:	Ja
capacidad de RAM:	5 GB
tipo RAM:	DDR3
Tipo de enchufe de conexión:	3,5 mm
red LAN:	Ja
Ángulo de visión, horizontal:	178 °
Ángulo de visión, vertical:	178 °
Cables suministrados:	AC, HDMI, USB, VGA
Relación de contraste típica:	1200:1
tecnología táctil:	Multi-touch
Brillo:	350 cd/m²
Guía de inicio rápido:	Ja
País de origen:	China
Número de puertos USB 2.0:	1
Número de puertos HDMI:	3
Número de puertos Ethernet LAN (RJ-45):	1
Altavoces incorporados:	Ja
Número de altavoces incorporados:	2
Consumo de energía (en espera):	0.5 W
Número soportado de baterías/baterías:	2
Consumo de energía (máx.):	535 W
Certificación:	Energy Star, FCC, UL, TUV
tipo HD:	4K Ultra HD
Puerto RS-232:	1
Tiempo de respuesta:	8 ms
Tamaño de píxel:	429.6 x 429.6 mm
Montaje VESA:	Ja
Interfaz de montaje en panel:	800 x 400 mm
Certificados de sostenibilidad:	CE, RoHS, WEEE
Relación de contraste (dinámica):	4000:1
miracast:	Ja
Cantidad por paquete:	1 stuk(s)
LAN Ethernet, velocidades de transferencia de datos:	10,100,1000 Mbit/s
Soporta Windows:	Ja
Memoria de usuario:	32 GB
Temperatura de almacenamiento:	0 - 40 °C
Soporta el sistema operativo Mac:	Ja
Humedad de almacenamiento:	10 - 90 procent
Compatibilidad con Mac:	Ja
Compatible con Linux:	Ja
Tiempo medio entre fallos (MTBF):	30000 uur
Salida S/PDIF:	Ja
Altavoces potentes:	16 W
Número de puertos de salida HDMI:	1
Número de puertos USB tipo C:	1
Mando a distancia incluido:	Ja
Conexión-de-micrófono:	3,5 mm
Wifi.:	Ja
voltaje-de-entrada-de-CA:	100 - 240 V
Frecuencia-de-entrada-de-CA:	50 / 60 Hz
Consumo de energía (típico):	305 W
Temperatura de funcionamiento (TT):	0 - 40 °C
Humedad relativa de funcionamiento (VV):	10 - 90 procent
Tipo de Batería:	AAA
Área de trabajo:	- mm
Número de puertos del concentrador USB 3.2 tipo A (3.1 Gen 1):	2
Proyector incorporado:	Nee
Tipo lápiz óptico:	Passief
Escriba la pluma:	Passieve pen
Toque de precisión:	-1 - 1 mm
Grosor del cristal de la pantalla:	3 mm