Supermicro MBD-X8SIE-F-O Manual de Usario

Supermicro Placa madre MBD-X8SIE-F-O

Lee a continuación 📖 el manual en español para Supermicro MBD-X8SIE-F-O (111 páginas) en la categoría Placa madre. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/111

USER’S MANUAL

Revision 1.0a

X8SIE-F

X8SIE

X8SIE-LN4

X8SI6-F

Manual Revision 1.0a

Release Date: December 18, 2009

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

This manu al is writ t en f o r sy ste m i nte g rato rs, P C tech nic ians and

knowledgeable PC users. It provides information for the installation and use of the

X8SIE/X8SIE-F/X8SIE-LN4/X8SI6-F motherboard.

About This Motherboard

The X8SIE/X8SIE-F/X8SIE-LN4/X8SI6-F supports the Intel® Xeon®

processor 3400 series in an LGA 1156 socket. With the Intel 3420 chipset built-in,

the X8SIE/X8SIE-F/X8SIE-LN4/X8SI6-F offers substantial enhancements in price/

system performance ratio in a cost-effective, small form-factor package. Please refer

to our web site (http://www.supermicro.com/products/) for updates on supported

processors. This product is intended to be installed and serviced by professional

technicians.

Manual Organization

Chapter 1 describes the features, specications and performance of the mother-

board and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes troubleChapter 3 -

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS and provides detailed information

on running the CMOS Setup utility.

Appendix A Appendix B provides BIOS Error Beep Codes. lists Other Software

Program Installation Instructions. Appendix C contains the BIOS Recovery In-

structions.

Preface

iii

Conventions Used in the Manual:

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent catastrophic

system failure or to avoid bodily injury

Warning: Important information given to ensure proper system installation

or to prevent damage to the components

Note: Additional Information given to differentiate various models or pro-

vides information for correct system setup.

Especificaciones del producto

Marca:	Supermicro
Categoría:	Placa madre
Modelo:	MBD-X8SIE-F-O
Peso.:	156 g
Ancho:	825 mm
Mango de color:	Blauw
Cantidad por paquete:	1 stuk(s)
Tipo de construcción:	Slipjoint-mes
Material-del-cuchillo:	Roestvrijstaal
Material-del-mango:	Aluminium
Longitud-de-la-hoja:	66 mm
Color de la hoja:	Roestvrijstaal
Escribe yo:	Tourist-zakmes
herramientas de cuchillo:	Awl, Can opener, Corkscrew, Pliers, Scissors, Screwdriver, Wire stripper, Wood saw