Supermicro X6DAL-XG Manual de Usario
Supermicro
Placa madre
X6DAL-XG
Lee a continuación 📖 el manual en español para Supermicro X6DAL-XG (108 páginas) en la categoría Placa madre. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/108
X6DAL-XG
USER’S MANUAL
Revision 1.0a
The information in this User’s Manual has been carefully reviewed and is believed to be
accurate. SUPER MICRO COMPUTER assumes no responsibility for any inaccuracies that
may be contained in this document, makes no commitment to update or to keep current the
information in this manual, or to notify any person or organization of the updates.Please
Note: For the most up-to-date version of this manual, please see our web site at
www.supermicro.com.
SUPER MICRO COMPUTER reserves the right to make changes to the product described
in this manual at any time and without notice. This product, including software, if any, and
documentation may not, in whole or in part, be copied, photocopied, reproduced, translated
or reduced to any medium or machine without prior written consent.
IN NO EVENT WILL SUPER MICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR
INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER SHALL
NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING,
INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR
DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of
Santa Clara County in the State of California, USA.The State of California, County of
Santa Clara shall be the exclusive venue for the resolution of any such disputes.
Supermicro's total liability for all claims will not exceed the price paid for the hardware
product.
*California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. "Perchlo-
rate Material-special handling may apply. See WWW.dtsc.ca.gov/hazardouswaste/perchlorate."
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to the
State of California to cause birth defects and other reproduc-
tive harm.
*FCC Statement: This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the manufacturer’s instruction manual, may cause interference with
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, you are encouraged
to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and the receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
· Consult the dealer or an experienced radio/television technician for help.
Revision Number: Rev. 1.0a
Release Date: July 30, 2007
Unless you request and receive written permission from SUPER MICRO COMPUTER, you
may not copy any part of this document.
Information in this document is subject to change without notice. Other products and
companies referred to herein are trademarks or registered trademarks of their respective
companies or mark holders.
Copyright © 2007 by SUPER MICRO COMPUTER INC.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
About This Manual
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use
of the X6DAL-XG motherboard. The X6DAL-XG sup-
ports single or dual Intel® Xeon NoconaTM processors at a 8 00 MHz front
side bus. Based upon Intel's NetBurst microarchitecture with EM64T sup-
port, the Nocona processor supports IA-32 and IA-64 software and in-
cludes features found in the XeonTM processor such as Hyper Pipelined
Technology, which includes a multi-stage pipeline, allowing the processor
to operate at much higher core frequencies. Packaged in a 604-pin Flip
Chip Micro Pin Grid Array(FC-mPGA4) platform in a Zero Insertion
Force(ZIF) socket (mPGA 604), the Nocona Processor (800 MHz) supports
Hyper-Threading Technology and is ideal for high performance workstation
and server environments with up to two processors on one system bus.
Please refer to the motherboard specifications pages on our web site (http:/
/www.supermicro.com/products/motherboard/) for updates on supported
processors. This product is intended to be professionally installed.
Manual Organization
Chapter 1 begins with a checklist of what should be included in your
mainboard box, describes the features, specifications and performance of
the motherboard and provides detailed information about the chipset.
Chapter 2 begins with instructions on handling static-sensitive devices.
Read this chapter when you want to install the processor and DIMM memory
modules and when mounting the mainboard in the chassis. Also refer to
this chapter to connect the floppy and hard disk drives, SCSI drives, the IDE
interfaces, the serial ports, the keyboard and mouse, the power supply and
various control panel buttons and indicators.
If you encounter any problems, see Chapter 3, which describes trouble-
shooting procedures for the video, the memory and the setup configuration
stored in CMOS. For quick reference, a general FAQ [Frequently Asked
Questions] section is provided.
Chapter 4 includes an introduction to BIOS and provides detailed informa-
tion on running the CMOS Setup utility.
Appendix A lists BIOS Error Beep Codes and DS LED POST Codes.
Appendix B provides BIOS POST codes.
Appendix C provides software installation instructions.
Especificaciones del producto
| Marca: | Supermicro |
| Categoría: | Placa madre |
| Modelo: | X6DAL-XG |
¿Necesitas ayuda?
Si necesitas ayuda con Supermicro X6DAL-XG haz una pregunta a continuación y otros usuarios te responderán
Placa madre Supermicro Manuales
27 Octubre 2024
27 Octubre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
Placa madre Manuales
- Placa madre Asus
- Placa madre Sharkoon
- Placa madre Gigabyte
- Placa madre Asrock
- Placa madre Evga
- Placa madre Intel
- Placa madre MSI
- Placa madre ECS
- Placa madre Elitegroup
- Placa madre Biostar
Últimos Placa madre Manuales
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
20 Octubre 2024
19 Octubre 2024
19 Octubre 2024
18 Octubre 2024