Supermicro X7DA3+ Manual de Usario

Supermicro Placa madre X7DA3+

Lee a continuación 📖 el manual en español para Supermicro X7DA3+ (127 páginas) en la categoría Placa madre. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/127

X7DA3+

USER’S MANUAL

Revision 1.0b

SUPER

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

manufacturer’s instruction manual, may cause interference with radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, you are encouraged to try to correct the interference by one or more

of the following measures: Reorient or relocate the receiving antenna. Increase the separation

between the equipment and the receiver. Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected. Consult the dealer or an experienced radio/television

technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used

in this product may expose you to lead, a chemical

known to the State of California to cause birth defects

and other reproductive harm.

Manual Revision: Rev. 1.0b

Release Date: August 4, 2009

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for system integrators, PC technicians, and knowledgeable

PC users. It provides information for the installation and use of the X7DA3+

motherboard. The X7DA3+ supports dual Intel Quad-Core and Dual-Core

processors with a front side bus speed of 1.333 GHz/1.066 GHz/667 MHz. With two

64-bit Quad-Core and Dual-Core processors built-in, the X7DA3+ offers substantial

functionality enhancements to the motherboards based on the Intel Quad-Core/

Dual-Core architecture while remaining compatible with the IA-32 software. The

features include the Intel Virtualization Technology, Thermal Monitor 1/2 (TM1/TM2),

Enhanced Intel SpeedStep technology, Advanced Dynamic Execution, Advanced

Transfer Cache, Streaming SIMD Extensions 3 (SSE3) and Extended Memory 64

Technology (EM64T). These features allow the motherboard to operate at higher

speeds with better power management in safer thermal environments than the

traditional motherboards. The X7DA3+ is ideal for high performance quad proces-

sor or dual processor workstation and server environments. Refer to our web site

(http://www.supermicro.com/products/) for updates on supported processors. This

product is intended to be professionally installed.

Manual Organization

Chapter 1 describes the features, speciﬁ cations and performance of the mother-

board and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes trouble-Chapter 3

shooting procedures for video, memory and system setup stored in CMOS.

Chapter 4 includes an introduction to BIOS and provides detailed information on

running the CMOS Setup utility.

Appendix A and Appendix B provide BIOS POST Messages and POST Codes.

Appendix C, Appendix D and Appendix E list HostRAID, Windows OS and Other

Software Program Installation Instructions.

Conventions Used in the Manual

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent

catastrophic system failure or to avoid bodily injury.

Warning: Important information given to ensure proper system installation

or to prevent damage to the components.

Note: Additional Information given to differentiate various models or to ensure cor-

rect system setup.

iii

Preface

Especificaciones del producto

Marca:	Supermicro
Categoría:	Placa madre
Modelo:	X7DA3+
Color del producto:	Zwart
Peso del embalaje:	9400 g
Ancho del embalaje:	1105 mm
Empaquetadura en profundidad:	656 mm
Altura del embalaje:	132 mm
Bluetooth:	Nee
Tipo de embalaje:	Doos
Control remoto:	EN2V36H
Diagonal de la pantalla:	43 "
Resolución:	1920 x 1080 Pixels
Relación de aspecto original:	16:9
Estándares wifi:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Formato de audio soportado:	AAC, AC3, FLAC, M4A, MP3, OPUS, PCM, WAV, WMA
Formatos de vídeo soportados:	ASF, AVC, AVI, FLV, H.264, H.265, HEVC, MKV, MOV, MPEG, MPEG1, MPEG2, MPEG4, MPG, TS, VOB, WMV, WMV3
Incluye sistema operativo:	VIDAA
red LAN:	Ja
Ángulo de visión, horizontal:	178 °
Ángulo de visión, vertical:	178 °
Forma de pantalla:	Flat
Relación de contraste típica:	3000:1
Brillo:	250 cd/m²
Número de puertos USB 2.0:	2
Número de puertos HDMI:	2
Vídeo de componentes (YPbPr/YCbCr):	1
Número de puertos Ethernet LAN (RJ-45):	1
Televisión inteligente:	Ja
Energía promedio:	14 W
Consumo de energía (en espera):	0.5 W
Número de hablantes:	2
Salidas de auriculares:	1
HDCP:	Ja
Soporte HDR:	Nee
tipo HD:	Full HD
Formato de imagen soportado:	BMP, GIF, JPEG, JPG, PNG
Versión del sistema operativo:	U7
Versión HDMI:	2.1
Tecnología de visualización:	LED
Tiempo de respuesta:	8 ms
Resoluciones de gráficos compatibles:	1920 x 1080 (HD 1080)
Montaje VESA:	Ja
Interfaz de montaje en panel:	200 x 200 mm
Profundidad (sin base):	88 mm
Altura (sin base):	563 mm
Ancho (sin base):	965 mm
Peso (sin base):	6100 g
Diámetro de la pantalla en centímetros.:	108 cm
Entrada de PC (D-Sub):	Nee
Interfaz común Plus (CI+):	Ja
tipo de sintonizador:	Analoog & digitaal
Formato de señal digital:	DVB-T, DVB-T2
televisión por internet:	Ja
Cambio de hora:	Ja
Televisión híbrida de banda ancha (HbbTV):	Ja
Funciona con Amazon Alexa:	Ja
Decodificadores de audio incorporados:	DTX, Dolby Digital
Consumo de energía (HDR) por 1000 horas:	- kWu
Consumo de energía (DEG) por 1000 horas:	- kWu
Clase de eficiencia energética (HDR):	Niet beschikbaar
navegador web:	Ja
Ancho del dispositivo (con soporte):	965 mm
Dispositivo de profundidad (con soporte):	186 mm
Altura del dispositivo (con soporte):	611 mm
Peso (con soporte):	6200 g
soporte de escritorio:	Ja
Reducción de ruido:	Ja
Teletexto:	Ja
Hojeada:	Ja
Configuración del ecualizador:	Ja
Versión híbrida de televisión de banda ancha (HbbTV):	2.0
guía de televisión electrónica:	Ja
Visualización en pantalla (OSD):	Ja
Canal de retorno de audio (ARC):	Ja
Número de puertos RF:	1
Frecuencia de actualización nativa:	60 Hz
Tecnología de decodificación de sonido.:	DTS Virtual:X
Búsqueda automática de canales:	Ja
grabación USB:	Ja
Tipo de retroiluminación LED:	Direct-LED
Periodo de programación:	7 dag(en)
Modo hotel:	Ja
Ancho del soporte:	818 mm
Profundidad del soporte:	186 mm
Canales de salida de audio:	2.0 kanalen
Duplicar pantalla:	Ja
Supervisión parental:	Ja
Color del soporte:	Zwart
Tipo estándar:	Onderstel met poten
Mando a distancia incluido:	Ja
Wifi.:	Ja
voltaje-de-entrada-de-CA:	100 - 240 V
Consumo de energía (típico):	- W
Tiempo-de-dormir:	Ja
Control de voz:	Ja