Supermicro X7SLM Manual de Usario

Lee a continuación 📖 el manual en español para Supermicro X7SLM (83 páginas) en la categoría Placa madre. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/83
X7SLM
X7SLM+
USER’S MANUAL
Revision 1.0b
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER. INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER. INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This
Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin
cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate”
WARNING: Handling of lead solder materials
used in this product may expose you to lead, a chemical
known to the State of California to cause birth defects and
other reproductive harm.
Manual Revision 1.0b
Release Date: August 27, 2010
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2010 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
Preface
This manu a l is written fo r s y stem in t eg r at o rs , PC t e ch ni ci an s an d
knowledgeable PC users. It provides information for the installation and use of the
X7SLM/X7SLM+ motherboard.
About This Motherboard
The X7SLM/X7SLM+ supports a single Intel® Core™ 2 Duo/Pentium dual-core/
Pentium D/Pentium 4/Celeron dual-core/Celeron/Celeron D Processor with a system
bus speed of up to 800 MHz. The Intel® Core™ 2 Duo/Pentium/Celeron Processor
supports the 775-Land Grid Array Package that interfaces with the motherboard via
an LGA775 socket. With support of the InteCore Microarchitecture Technology,
Graphics Media Accelerator 950, Advanced Digital Media Boost, and Smart Memory
Access, the X7SLM/X7SLM+ delivers unparalleled system performance and great
energy efciency in a slim package. Please refer to the motherboard specica-
tions pages on our web site (http://www.supermicro.com/Products/) for updates on
supported processors. This product is intended to be installed and serviced by a
professional.
Manual Organization
Chapter 1 describes the features, specications and performance of the mainboard
and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see , which describes troubleChapter 3 -
shooting procedures for video, memory and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS and provides detailed information
on running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists the Windows OS Installation Instructions.
Appendix C lists Other Software Program Installation Instructions.
Conventions Used in the Manual:
Special attention should be given to the following symbols for proper installation and
to prevent damage done to the components or injury to yourself:
Danger/Caution: Instructions to be strictly followed to prevent catastrophic
system failure or to avoid bodily injury
Preface
iii

Especificaciones del producto

Marca: Supermicro
Categoría: Placa madre
Modelo: X7SLM

¿Necesitas ayuda?

Si necesitas ayuda con Supermicro X7SLM haz una pregunta a continuación y otros usuarios te responderán