Swann PRO-1080FLD Manual de Usario

Swann Cámara de vigilancia PRO-1080FLD

Lee a continuación 📖 el manual en español para Swann PRO-1080FLD (2 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 14 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/2
5 6
Limited Warranty - Terms & Conditions
Swann Communications warrants this product
against defects in workmanship and material for
a period of one (1) year from its original purchase
date. You must present your receipt as proof of
purchase for warranty validation. Any unit which
proves defective during the stated period will
be repaired without charge for parts or labour
or replaced at the sole discretion of Swann. The
end user is responsible for all freight charges in-
curred to send the product to Swann’s repair cen-
tres. The end user is responsible for all shipping
costs incurred when shipping from and to any
country other than the country of origin.
The warranty does not cover any incidental, ac-
cidental or consequential damages arising from
the use of or the inability to use this product. Any
costs associated with the fitting or removal of this
product by a tradesman or other person or any
other costs associated with its use are the re-
sponsibility of the end user. This warranty applies
to the original purchaser of the product only and
is not transferable to any third party. Unauthor-
ized end user or third party modifications to any
component will render all warranties void. By law
some countries do not allow limitations on certain
exclusions in this warranty. Where applicable by
local laws, regulations and legal rights will take
precedence.
For Australia: Our goods come with guarantees
which cannot be excluded under Australian Con-
sumer Law. You are entitled to a replacement
or refund for a major failure and for compensa-
tion for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of ac-
ceptable quality.
M1080FLDCAM_030516E | © Swann 2016
FCC Verification
This equipment has been tested and found to comply with the limits for Class B digital device, pursu-
ant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
nected
• Consult the dealer or an experienced radio/TV technician for help
These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) These devices may not cause harmful interference.
(2) These devices must accept any interference received, including interference that may cause unde-
sired operation.
HD Dome
Security Camera
For use with Swann 1080P HD DVRs
EN INSTRUCTION MANUAL
Helpdesk/Technical Support
Technical Support E-mail: tech@swann.com
Telephone Helpdesk
USA 1800 627 2799
AUSTRALIA 1800 788 210
NEW ZEALAND 0800 479 266
UK 0808 168 9031
Tell us what you think!
We are constantly working to improve the quality of our documentation, and we would appreciate
your feedback. You can give us your feedback by clicking here to complete a short survey.
Video & Audio
Output
1 2 3 4
Congratulations on your purchase of this HD
Dome Security Camera.
• -Use the On-Screen Display (OSD) control
ler & built-in software to customize the
camera settings including color, bright-
ness & wide dynamic range for the best
video quality every time
• This camera can be used in combination
with other analog surveillance technolo-
gy including AHD, TVI, CVI from Swann &
other brands. It’s the perfect addition if you
already have a recording solution (DVR) &
need extra cameras
• -The camera joystick is used to set the sig
nal modes for the camera. Hold for 2 sec-
onds; Up for Analog, Left for AHD, Right for
TVI and Down for CVI.
Important note: All jurisdictions have specific
laws and regulations relating to the use of cam-
eras. Before using any camera for any purpose,
it is the buyer’s responsibility to be aware of all
applicable laws and regulations that prohibit or
limit the use of cameras and to comply with the
applicable laws and regulations.
Warning: Modifications not approved by the party
responsible for compliance could void user’s au-
thority to operate the equipment.
Important safety instructions
1) Make sure product is fixed correctly and stable
if fastened in place.
2) Do not operate if wires and terminals are ex-
posed.
Introduction Choosing a location for your Camera
This camera has an on-screen configuration menu to
configure various image settings as they apply to the
camera and the scene that you wish to view.
1) You should endeavor to set the camera up close
to the area you wish to view before you install the
camera so that you have access to the joystick and
can adjust the image settings.
2) What you want to monitor and where you’ll get the
best view of it.
3) How you’re going to connect the camera to your
monitoring system; you should plan the route from
the recorder to each camera
4) How to keep the camera out of harm’s way. It’s
recommended to mount your cameras in an elevated
position to prevent easy access.
5) Place your camera as close to the area of interest
as practicable. The best position is from about 3-4m
(9-13ft) above looking slightly down.
6) Although the sky looks nice when you look at the
live view from your camera, it is an unlikely direction
for an offender to approach from. Keep the camera
pointed down away from the sky or ceiling. This will
also minimize glare from lighting affecting the image.
7) Think about the most likely way a potential
offender may approach your home and position your
cameras to give you the best coverage of these areas.
8) The camera’s casing is resistant to water, different
weather conditions and tampering. However, the
cable and connectors are vulnerable and require
protection.
9) Even though the camera is weather and water-
resistant, prolonged exposure to adverse weather
conditions such as sunlight or excessive moisture,
may eventually damage the internal components of
the camera and adversely affect its performance.
Connecting your Camera Mounting your Camera
Connect the video & audio
output and DC power
connection on the camera
to the corresponding
connections on the video,
audio & power cable.
Connect the video (and audio if available)
connection on the other end of the cable
to a video (and audio) input on the DVR.
Connect the power
adapter to the cable
power socket and then to
a spare wall socket.
For multi-camera packs, use a
power splitter cable (if included).
Twist the video connection
to lock it in place.
The camera can be mounted onto a flat, vertical or
horizontal surface using the supplied mounting
screws. Materials such as hardwood, brick or
masonry are ideal. You can mount the camera onto
a metal surface, but you’ll need to supply your own
mounting hardware.
To mount the camera:
• Loosen the 2 hex screws (T6H) on the base of
the camera mount. The mounting bracket will
come away from the dome assembly
• If you’re mounting to a wooden surface, screw
the bracket directly to the surface
• When mounting to a masonry surface, you’ll
need to use the included wall plugs
Aiming the camera:
• Gently loosen the 2 hex screws (T6H) located at
the base of the camera
• The gimbal mount can be rotated left or right
• The camera can be aimed in almost any
direction from wherever you choose to mount
it. After you’ve finished adjusting the viewing
angle, tighten each screw to lock the camera’s
position in place
Positioning the cables:
• When running the cable, try to avoid bending it
at sharp angles
• Avoid positioning the cable near live electrical
wiring as electrical current generates a
magnetic field which can interfere with the
signal from your camera
PTZ
7 5 3 1
8 6 4 2
eSATA
HDMI LAN & USB B A D C 12V
IN
VGAVIDEO IN AUDIO O UT
AUDIO IN
Video, Audio &
Power Cable
Joystick
The joystick is used
to set the signal
from the camera.
1
2
3
i

Especificaciones del producto

Marca: Swann
Categoría: Cámara de vigilancia
Modelo: PRO-1080FLD

¿Necesitas ayuda?

Si necesitas ayuda con Swann PRO-1080FLD haz una pregunta a continuación y otros usuarios te responderán


Cámara de vigilancia Swann Manuales

Swann

Swann SWNHD-866MSD Manual de Usario

3 Octubre 2024
Swann

Swann SW312-HMD-CA Manual de Usario

16 Septiembre 2024
Swann

Swann PRO-A851 Manual de Usario

15 Septiembre 2024
Swann

Swann Enforcer SWPRO-4KMQB Manual de Usario

30 Agosto 2024
Swann

Swann PrivateEye ADS-45 Manual de Usario

21 Agosto 2024
Swann

Swann SWNVK-887802B2FB Manual de Usario

18 Agosto 2024
Swann

Swann SWPRO-961CAM Manual de Usario

17 Agosto 2024
Swann

Swann PRO-1080FLD Manual de Usario

16 Agosto 2024
Swann

Swann PRO-761 Manual de Usario

15 Agosto 2024
Swann

Swann NVR8-7285 Manual de Usario

11 Agosto 2024

Cámara de vigilancia Manuales

Últimos Cámara de vigilancia Manuales

Speco Technologies

Speco Technologies WDRB11H Manual de Usario

27 Octubre 2024
Vivotek

Vivotek AI-108 Manual de Usario

27 Octubre 2024
Acti

Acti E88 Manual de Usario

27 Octubre 2024
Yale

Yale WIPC-303W Manual de Usario

27 Octubre 2024
Grandstream

Grandstream GXV3611IR_HD Manual de Usario

27 Octubre 2024
Airlive

Airlive DM-720 Manual de Usario

27 Octubre 2024
Speco Technologies

Speco Technologies O8B7M Manual de Usario

27 Octubre 2024
Grandstream

Grandstream GXV3615W Manual de Usario

27 Octubre 2024
Vivotek

Vivotek IP8133 Manual de Usario

27 Octubre 2024
Olympia

Olympia OC 1280P Manual de Usario

27 Octubre 2024