Swann SWNVW-490CAM Manual de Usario

Swann Cámara de vigilancia SWNVW-490CAM

Lee a continuación 📖 el manual en español para Swann SWNVW-490CAM (2 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/2
WIFI1080PCAM231018E | © Swann 2018
Helpdesk & Technical Support
Technical Support E-mail: tech@swann.com
Technical Support Website: support.swann.com
Telephone Helpdesk
USA Toll Free 1-800-627-2799
USA Parts & Warranty 1-800-627-2799
(M-F, 9am-5pm US PT)
AUSTRALIA 1800 788 210
NEW ZEALAND Toll Free 0800 479 266
UK 0808 168 9031
Swann Communications warrants this product against defects in workmanship and material for a period of
one (1) year from its original purchase date. You must present your receipt as proof of purchase for warranty
validation. Any unit which proves defective during the stated period will be repaired without charge for parts or
labour or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incurred
to send the product to Swann’s repair centres. The end user is responsible for all shipping costs incurred when
shipping from and to any country other than the country of origin.
The warranty does not cover any incidental, accidental or consequential damages arising from the use of or
the inability to use this product. Any costs associated with the fitting or removal of this product by a tradesman
or other person or any other costs associated with its use are the responsibility of the end user. This warranty
applies to the original purchaser of the product only and is not transferable to any third party. Unauthorized end
user or third party modifications to any component will render all warranties void. By law some countries do not
allow limitations on certain exclusions in this warranty. Where applicable by local laws, regulations and legal
rights will take precedence.
For Australia: Our goods come with guarantees which cannot be excluded under Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality.
This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) These devices may not cause harmful interference.
(2) These devices must accept any interference received, including interference that may cause undesired op-
eration.
Wi-Fi Series
1080p Security Camera
Add-on Camera for Swann HD Wi-Fi Monitoring Systems
EN INSTRUCTION MANUAL
Security Made Smarter
Security Made Smarter
Limited Warranty - Terms & Conditions5 FCC Verification6
1
Introduction
Congratulations on your purchase of this Wi-Fi
Series 1080p Security Camera.
• A state of the art surveillance camera with
1080p video technology
• Seeing is believing with 1080p HD Cameras
perfect for most locations around home or
business
• Latest infrared cut filter for amazing night vi-
sion for clarity in low light
• Sturdy metal construction suits indoor &
outdoor applications with IP66 rating for any
weather conditions
• Deter thieves, safeguard loved ones, protect
your property & cut the cost of crime with
this professional surveillance camera from
Swann
Important instructions
1. Make sure your camera is fixed correctly and
stable if fastened in place.
2. Only use the supplied power extension cable
and power adapter (12V).
3. Do not operate if wires and terminals are ex-
posed.
Please note: Have a look at the camera location
tips included with your NVR, to select the best lo-
cation for your camera (the camera location tips
provided here are for general purpose only).
Important note: All jurisdictions have specific
laws and regulations relating to the use of cam-
eras. Before using any camera for any purpose,
it is the buyer’s responsibility to be aware of all
applicable laws and regulations that prohibit or
limit the use of cameras.
2
Connecting your Camera
3
Mounting your Camera
4
Camera Location Tips
Some things to consider when choosing a location -
1. The effective signal range of your Wi-Fi signal
2. What you want to monitor and where you’ll get the
best view of it.
3. How you’re going to connect your camera to your
monitoring system; remember that cables and
connections should be kept out of the weather.
4. How to keep your camera out of harm’s way. It’s
recommended to mount your camera at an elevated
position.
5. Place your camera as close to the area of interest
as practicable. The best position is from about 4m
(13ft) above looking slightly down, keeping in mind the
details you are looking for.
6. Although the sky looks nice when you look at the
live view from your camera, it is an unlikely direction
for an offender to approach, make sure your camera
has minimal sky in it as the light in daylight can make
the foreground of the image darker.
7. Think about the most likely way a potential offender
may approach your home, use your cameras to give
you the best coverage of these areas.
8. The camera’s casing is resistant to water, different
weather conditions and tampering. It would take
an overwhelming event of this kind to damage the
housing of your camera. However, the cable and
connector are vulnerable and require protection.
9. Even though your camera is weather and water-
resistant, prolonged exposure to adverse weather
conditions such as sunlight or excessive moisture,
may eventually damage the internal components of
the camera and adversely affect its performance.
10. Don’t put your cable near live electrical wiring.
AC electricity generates radio “noise” which can
interfere with the signal from your camera.
1. Use a clockwise motion to connect the provided Wi-
Fi antenna to the Wi-Fi connection located at the rear.
Connect the Power Input on the camera to the Power
Output on the Power Extension Cable.
2. Connect the Power Input on the Power Extension
Cable to the Power Adapter.
3. Connect the Power Adapter to a wall socket then
press the wall socket’s switch to the on position.
Reset/Pair: To reset, press and hold the button,
connect power and continue holding for 10 seconds.
You can also pair the camera to your NVR (if network
settings are changed).
2
Reset/Pair
Power
Input
Power
Output
Power
Input
Power Cable
Power Adapter
31
Connect the Power Adapter to
a power outlet then press the
outlet’s swith to the ON position
to supply power.
The camera can be mounted onto a flat surface using the screws and wall plugs provided. The surface must
have sufficient strength to hold the camera. Before mounting your camera, remove the Wi-Fi antenna first then
reattach when finished.
→ Position the camera in the location you want to mount it, and mark the screw holes on the surface to
position the screws (a mounting template has been included). Then, using the appropriate screws for the
surface you’re fixing the camera to, secure the camera in place.
→ If you’re mounting to a wooden surface, then screw the camera directly to the surface.
→ If you’re mounting to a masonry surface (bricks, concrete or similar), then you’ll need to use wall plugs.
Adjusting the camera angle
→ Loosening the locking ring will allow you to pan, tilt and rotate the camera.
→ Remember to tighten the locking ring to secure the camera’s position in place after you’ve finished
adjusting the viewing angle of the camera.

Especificaciones del producto

Marca: Swann
Categoría: Cámara de vigilancia
Modelo: SWNVW-490CAM

¿Necesitas ayuda?

Si necesitas ayuda con Swann SWNVW-490CAM haz una pregunta a continuación y otros usuarios te responderán


Cámara de vigilancia Swann Manuales

Swann

Swann SWNHD-866MSD Manual de Usario

3 Octubre 2024
Swann

Swann SW312-HMD-CA Manual de Usario

16 Septiembre 2024
Swann

Swann PRO-A851 Manual de Usario

15 Septiembre 2024
Swann

Swann PRO-760 Manual de Usario

9 Septiembre 2024
Swann

Swann SW231-WMX Manual de Usario

9 Septiembre 2024
Swann

Swann Pro DVR8-4000 Manual de Usario

8 Septiembre 2024
Swann

Swann ADS-466 Manual de Usario

8 Septiembre 2024
Swann

Swann DVR4-1000 Manual de Usario

2 Septiembre 2024
Swann

Swann SWVID-PENBL4 Manual de Usario

2 Septiembre 2024
Swann

Swann Enforcer SWPRO-4KMQB Manual de Usario

30 Agosto 2024

Cámara de vigilancia Manuales

Últimos Cámara de vigilancia Manuales

Speco Technologies

Speco Technologies WDRB11H Manual de Usario

27 Octubre 2024
Vivotek

Vivotek AI-108 Manual de Usario

27 Octubre 2024
Acti

Acti E88 Manual de Usario

27 Octubre 2024
Yale

Yale WIPC-303W Manual de Usario

27 Octubre 2024
Grandstream

Grandstream GXV3611IR_HD Manual de Usario

27 Octubre 2024
Airlive

Airlive DM-720 Manual de Usario

27 Octubre 2024
Speco Technologies

Speco Technologies O8B7M Manual de Usario

27 Octubre 2024
Grandstream

Grandstream GXV3615W Manual de Usario

27 Octubre 2024
Vivotek

Vivotek IP8133 Manual de Usario

27 Octubre 2024
Olympia

Olympia OC 1280P Manual de Usario

27 Octubre 2024