Tannoy Vnet USB RS232 Interface Manual de Usario

Tannoy Vocero Vnet USB RS232 Interface

Lee a continuación 📖 el manual en español para Tannoy Vnet USB RS232 Interface (8 páginas) en la categoría Vocero. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

User Guide

VNETTM USB AND RS232 INTERFACE

IMPORTANT SAFETY INFORMATION

Please read carefully and keep the following instructions and safety information. Heed all

warnings and follow all instructions.

1. Do not remove covers. There are no user-serviceable parts inside; please refer servicing

to qualified service personnel.

2. This equipment must be earthed.

3. Protect the power cord from being walked on or pinched, particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

4. Only use attachments/accessories specified by the manufacturer.

5. Servicing is required when the apparatus has been damaged in any way, such as the

power supply cord or plug is damaged, liquid has been spilled or objects have fallen into

the apparatus, the apparatus has been exposed to rain or moisture, does not operate

normally, or has been dropped.

IMPORTANT SAFETY INFORMATION

Please read carefully and keep the following

instructions and safety information. Heed all

warnings and follow all instructions.

• Do not remove covers. There are no

user-serviceable parts inside; please

refer servicing to qualified service personnel.

• Only use attachments/accessories specified

by the manufacturer.

• Servicing is required when the apparatus has

been damaged in any way, such as liquid has

been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or

has been dropped.

QUICK START

• Install the drivers

• Connect computer via USB or RS232

• Apply power if using RS232

• Connect devices via RJ45 cables

REGULATORY COMPLIANCE

This product complies with the EMC Directive

(89/336/EEC) as issued by the Commission of the

European Community.

Compliance with these directives imply conformity

with the following European standards:

• EN55103-1 Electromagnetic Interference

(Emission)

• EN55103-2 Electromagnetic Susceptibility

(Immunity)

This product is intended for operation in the E2

(commercial & light industrial) and E3 (urban

outdoors) Electromagnetic Environments.

THANK YOU

Thank you for choosing this product for your

application. Please spare a little time to study the

contents of this guide, so that you obtain the best

possible performance from this unit.

UNPACKING

After unpacking the unit please check carefully for

damage. If damage is found, please notify the

carrier concerned at once. You, the consignee,

must instigate any claim. Please retain all

packaging in case of future re-shipment.

INTRODUCTION / KEY FEATURES

This product gives your Personal Computer

connectivity to a network of VNET™ equipped

devices so they can be controlled and monitored.

The VNET™ Interface can connect via USB or Serial

(RS232).

VNET™ is a fast networking topology using standard

Cat5 cabling to interconnect compatible devices

u sing a simple cabling scheme. The total span of

the network may be at least 1km without repeaters.

There is no maximum length for a single span

within this limit.

Housed in a convenient, rugged steel case, it can

be used free-standing or, using the rack-mount kit,

may be racked along with up to two additional

accessory products in 1U rack-space.

FEATURES:

• Rugged steel enclosure

• Free-standing or rack-mount options

• Rugged Ethercon network connectors

• Self-powered (using USB)

• Capable of driving 1km of network cable

• No special cables

COMPUTER SYSTEM REQUIREMENTS

Minimum requirements:

• PC with Pentium processor

• 32-bit Windows tm operating system (NT, 2000,

XP, Vista).

• CD-ROM drive or Internet access

• RS232 or USB port *

*Note that the network will operate slightly more

quickly when using RS232, so this is the preferred

method of connection.

INSTALLING THE SOFTWARE

If you only want to use the VNET™ Interface with

the Serial (RS232) port of your computer, you do

not need to install any drivers. If you wish to use

USB, then you need to install USB drivers for this

product.

When you plug the USB connection of the VNET™

Interface into a computer for the first time, the

computer will say “Found new hardware”, and will

prompt you to install drivers for it. Two drivers will

be installed: One for the USB port itself, and one for

the Virtual Com Port (VCP). Note that both of these

drivers may report that they have “Not passed

Windows Logo Testing”. You should select

“Continue Anyway”.

If the driver software has been supplied to you on a

CD-ROM, place this in your CD-ROM drive.

Alternatively, download the drivers from your

vendor’s web site.

V INTERFACE USER GUIDENET

Especificaciones del producto

Marca:	Tannoy
Categoría:	Vocero
Modelo:	Vnet USB RS232 Interface
Color del producto:	Chroom
Adecuado para:	Badkamerwastafel
Temperatura máxima de suministro de agua caliente:	80 °C
Material de la grúa:	Geelkoper
Presión de flujo de agua recomendada (máx.):	1000 kPa
Presión de flujo de agua recomendada (min):	100 kPa