Taylor 5153 Manual de Usario

Lee a continuación 📖 el manual en español para Taylor 5153 (1 páginas) en la categoría termómetro. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
MOUNTING SUGGESTIONS
1. IMPORTANT: For accurate air temperature
measurement, choose a mounting location that
will not expose the thermometer to direct
sunlight.
2. The bracket may be attached to either the left
or right side of the thermometer.
3. The bracket may be formed over a table edge
to provide an angled mounting position. Bend at
the side near the round holes in the bracket.
4. The thermometer may be mounted on a flat
surface without a bracket by using the hanger
located on the back side.
MOUNTING INSTRUCTIONS
1. Attach the formed bracket to the
window frame with two No.6 screws.
2. To attach the thermometer to the
bracket:
A. Position the bracket so the
rectangular slots are over the tabs on the
back.
B. Support the bracket with your fingers
and push the thermometer onto the
bracket with your thumbs.
REJOINING SEPARATED FLUID
SEPARATED FLUID
This is a quality instrument manufactured with the finest
facilities and materials. Occasionally, rough handling in
shipment or improper storage may cause the red liquid to
separate slightly. This is not a defect. The liquid can be
reunited easily before installation. First, remove from the
card. Tap the side of the thermometer, bulb end down, as
illustrated, against the palm of the hand. Pause between
taps to permit liquid to run down tube. Continue until
liquid is completely joined.
At Taylor, superior quality and workmanship is more than an objective . . . it's a promise.
Since 1851, Taylor has crafted precision measurement instruments with unmatched accuracy
and readability for optimal performance. It's no wonder we are the professionals’ choice for
measurement products.
WALL MOUNTING
WITHOUT
BRACKET
ADJUSTABLE
MOUNTING
BRACKET
ANGLES
TABS LOCK INTO
SLOTS ON BRACKET
1 YEAR LIMITED WARRANTY
Taylor warrants this product to be free from defects in material or workmanship, and on
return, will repair or replace it at our option, without charge.
Taylor Precision Products, Inc.
Oak Brook, IL 60523, U.S.A.
Made to our exact specifications in China.
5153 10.14E
©2014 Taylor Precision Products, Inc. and its affiliated companies, all rights
reserved. Taylor® and Leading the Way in Accuracy® are registered
trademarks of Taylor Precision Products, Inc. and its affiliated companies.
All rights reserved.

Especificaciones del producto

Marca: Taylor
Categoría: termómetro
Modelo: 5153

¿Necesitas ayuda?

Si necesitas ayuda con Taylor 5153 haz una pregunta a continuación y otros usuarios te responderán




termómetro Taylor Manuales

termómetro Manuales

Últimos termómetro Manuales