Taylor 92331T Manual de Usario

Taylor Reloj 92331T

Lee a continuación 📖 el manual en español para Taylor 92331T (2 páginas) en la categoría Reloj. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

QUICK USE GUIDE

MOUNTING INSTRUCTIONS

1. Select a location on a wall that is out of direct sunlight.

2. Two screws or nails (not included) are required for

mounting. Place the first screw approximately 2 ¾”

below the point where the top of the thermometer will be

positioned, leaving screw or nail head out approximately

¼”. Place the second screw or nail 8” below the first.

3. Place the thermometer over the screws or nails heads.

CLOCK OPERATING INSTRUCTIONS

1. Insert 1 AA battery (not included) according to polarity

markings inside the battery compartment.

2. Set correct time by rotating the adjustment knob on the

back of the clock movement.

Congratulations on purchasing your decorative indoor and outdoor polyresin clock and/or

thermometer by Taylor. This line of product is hand painted and sculpted of durable polyresin

material that is weather resistant. Includes thermometer coils that are precision made and

Quartz clock movement for the utmost accuracy. Please read instructions below thoroughly to

ensure that you have the full benefit of all the unit’s features. Keep these instructions handy for

future reference.

TO RECALIBRATE THE THERMOMETER

Your thermometer will be accurate from the factory, however

rough shipping and handling could disrupt the accuracy. Here

are some quick tips on how to recalibrate your thermometer.

1. Place the thermometer in a room with a known

temperature and allow the thermometer pointer to settle

for at least 10 minutes.

2. Spin the dial on the back of the thermometer to match

the current temperature of the room.

EXPOSURE

1. Do not mount in direct sunlight, near a heat source, or near a large body of water as these

situations could affect the proper air temperature reading. Ultraviolet light from sunlight

can prematurely weather the product.

2. Mount securely and protected from the wind to prevent against any damage from being

knocked off the mounting screw and falling to the ground.

Thermometer coil

Battery Compartment

Mounting

Support

LIMITED WARRANTY

This product is warranted against defects in materials or workmanship (excluding batteries) for

one (1) year from date of original purchase for the original purchaser. It does not cover damages

or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment

and/or repair. Should this product require service (or replacement at our option) while under

warranty, do not return to retailer. Please pack the item carefully and return it prepaid, along

with store receipt showing date of purchase and a note explaining reason for return to:

TAYLOR, a division of Lifetime Brands Inc.

2220 Entrada Del Sol, Suite A

Las Cruces, New Mexico 88001 USA

www.taylorusa.com

Email: taylorusa@lifetimebrands.com

There are no expressed warranties except as listed above. This warranty gives you specific

legal rights, and you may have other rights which vary from state to state. For additional

product information, or warranty information outside the USA, please contact us through www.

taylorusa.com.

Not legal for trade.

Made to our exact specifications in China.

5.2 2 TS

Contact Information & Limited Warranty

BATTERY INFORMATION

This unit is powered by 1 ' ' battery (not included). Remove the battery compartment cover AA

located on the back of the unit. Install the battery according to the polarity markings. Replace

the battery cover.

NOTE: Please recycle or dispose of batteries per local regulations.

WARNING: Batteries may pose a choking hazard. As with all small items, do not let children

handle batteries. If swallowed, seek medical attention immediately.

PRECAUTION: Do not dispose of batteries in fire. Batteries may explode or leak. Remove the

batteries if the scale will not be used for a long period of time.

Especificaciones del producto

Marca:	Taylor
Categoría:	Reloj
Modelo:	92331T
Color del producto:	Zwart
Peso.:	3000 g
Ancho:	440 mm
Profundidad:	220 mm
Altura:	44 mm
Indicadores LED:	Ja
Actual:	1 A
Cables suministrados:	AC
Guía de inicio rápido:	Ja
Certificación:	CE, FCC
Estándar de red:	IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Montaje en bastidor:	Ja
Alimentación a través de Ethernet (PoE):	Ja
Apilable:	Ja
Capacidad de conmutación:	3.2 Gbit/s
Dirección MAC:	4000 entries
soporte 10G:	Nee
Número de puertos Ethernet RJ-45 de conmutación básica:	16
Tipo de conmutación básica de puertos Ethernet RJ-45:	Fast Ethernet (10/100)
voltaje-de-entrada-de-CA:	90 - 260 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Temperatura de funcionamiento (TT):	0 - 40 °C
Presupuesto total de alimentación a través de Ethernet (PoE):	250 W