TC Electronic Studio Konnekt 48D Manual de Usario

TC Electronic No categorizado Studio Konnekt 48D

Lee a continuación 📖 el manual en español para TC Electronic Studio Konnekt 48D (37 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/37
User’s Manual
English Version
Studio Konnekt 48
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8 Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
• This equipment should be installed near the socket
outlet and disconnection of the device should be easily
accessible.
• To completely disconnect from AC mains, disconnect the
power supply cord from the AC receptacle.
• The mains plug of the power supply shall remain readily
operable.
• Do not install in a confined space.
• Do not open the unit – risk of electric shock inside.
Caution:
You are cautioned that any change or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
Service
• There are no user-serviceable parts inside.
• All service must be performed by qualified personnel.
Warning!
• To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture and objects filled with
liquids, such as vases, should not be placed on this
apparatus.
• This apparatus must be earthed.
• Use a three wire grounding type line cord like the one
supplied with the product.
• Be advised that different operating voltages require the use
of different types of line cord and attachment plugs.
• Check the voltage in your area and use the correct type.
See table below:
Voltage Line plug according to standard
110-125V UL817 and CSA C22.2 no 42.
220-230V CEE 7 page VII, SR section
107-2-D1/IEC 83 page C4.
240V BS 1363 of 1984.
Specification for 13A fused
plugs and switched and
unswitched socket outlets.
The lightning flash with an arrowhead symbol within
an equilateral triangle is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
a
EMC/EMI
This equipment has been tested and found to comply
with the limits for a Class B Digital device, pursuant to
part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in residential
installations. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
For Customers in Canada:
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
Certificate of Conformity
TC Electronic A/S, Sindalsvej 34, 8240
Risskov, Denmark, hereby declares on own
responsibility that the following product:
Studio Konnekt 48
that is covered by this certificate and
marked with CE-label conforms with
following standards:
EN 60065 Safety requirements for mains
(IEC 60065) operated electronic and
related apparatus for household
and similar general use
EN 55103-1 Product family standard for
audio,video, audio-visual and
entertainment lighting control
apparatus for professional use.
Part 1: Emission.
EN 55103-2 Product family standard for
audio, video, audio-visual and
entertainment lighting control
apparatus for professional use.
Part 2: Immunity.
With reference to regulations in following
directives:
73/23/EEC, 89/336/EEC
Issued in Risskov, September 2007
Mads Peter Lübeck
Chief Executive Officer
TC Electronic, Sindalsvej 34, DK-8240 Risskov – info@tcelectronic.com Manual revision 1.0English Version
INTRODUCTION
Safety instructions . . . . . . . . . . . . . . . . . . . . . .a
EMC/EMI & Certificate of Conformity . . . . . . . .b
Table of contents . . . . . . . . . . . . . . . . . . . . . . .3
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Setup notes . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Computer requirements . . . . . . . . . . . . . . . . . .5
OVERVIEW
Front panel overview . . . . . . . . . . . . . . . . . . . .6
Rear panel overview . . . . . . . . . . . . . . . . . . . . .8
CONTROL PANEL
Mixer page . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Preset handling . . . . . . . . . . . . . . . . . . . . . . .15
Setup page . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Bass management . . . . . . . . . . . . . . . . . . . . .20
SETUP EXAMPLES
Studio recording & monitoring . . . . . . . . . . . .22
Bass management & integration . . . . . . . . .24
Integrator . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Konnekt WDM driver . . . . . . . . . . . . . . . . . . .29
System settings . . . . . . . . . . . . . . . . . . . . . . .30
Studio Kontrol Remote . . . . . . . . . . . . . . . . . .34
Studio Kontrol Remote page . . . . . . . . . . . . .38
Fabrik C Studio . . . . . . . . . . . . . . . . . . . . . . . .40
Fabrik R Studio . . . . . . . . . . . . . . . . . . . . . . . .52
Preset Handling . . . . . . . . . . . . . . . . . . . . . . .58
ResFilter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
APPENDIX
ASIO channel names . . . . . . . . . . . . . . . . . . .66
Signal flow . . . . . . . . . . . . . . . . . . . . . . . . . . .67
FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Shortcut keys . . . . . . . . . . . . . . . . . . . . . . . . .68
DICE background . . . . . . . . . . . . . . . . . . . . . .68
Firmware update & Reset to default . . . . . . . .69
EMC / EMI & CERTIFICATE OF CONFORMITY TABLE OF CONTENTS
3b

Especificaciones del producto

Marca: TC Electronic
Categoría: No categorizado
Modelo: Studio Konnekt 48D

¿Necesitas ayuda?

Si necesitas ayuda con TC Electronic Studio Konnekt 48D haz una pregunta a continuación y otros usuarios te responderán


No categorizado TC Electronic Manuales

TC Electronic

TC Electronic ND-1 Nova Delay Manual de Usario

10 Octubre 2024
TC Electronic

TC Electronic Eyemaster Metal Distortion Manual de Usario

30 Septiembre 2024
TC Electronic

TC Electronic TC8210-DT Manual de Usario

28 Septiembre 2024
TC Electronic

TC Electronic PowerCore Compact Manual de Usario

27 Septiembre 2024
TC Electronic

TC Electronic PowerPlug 9 Manual de Usario

24 Septiembre 2024
TC Electronic

TC Electronic NETHER OCTAVER Manual de Usario

23 Septiembre 2024
TC Electronic

TC Electronic T2 Reverb Manual de Usario

22 Septiembre 2024
TC Electronic

TC Electronic Quintessence Harmony Manual de Usario

21 Septiembre 2024
TC Electronic

TC Electronic Vintage Distortion Manual de Usario

20 Septiembre 2024
TC Electronic

TC Electronic Master X HD Native Manual de Usario

18 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024