Teltonika RUT300 Manual de Usario

Teltonika Router RUT300

Lee a continuación 📖 el manual en español para Teltonika RUT300 (13 páginas) en la categoría Router. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/13
RUT300
Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.
DATASHEET // RUT300
HARDWARE
POWER SOCKET PINOUT
FRONT VIEW
BACK VIEW
2
Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.
Power / Red wire Ground / Black wire
Input/ Output / White wireInput/ Output / Green wire
I/O (PIN 3 and 4): Configurable digital Input/Output pins. Open collector output, max output 30 V, 300 mA or Digital input where 0-6 V detected as logic low and
8-30 V – logic high
WAN LEDs LAN LEDs
Power socket USB port
WAN Ethernet portLAN Ethernet ports
Reset button
LAN4 WANLAN3LAN2LAN1
PWR RESET USB
Power LED
3
Static routes, Dynamic routes (planned)
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP (planned), SMTP, SSL v3, TLS, ARP, PPPoE, UPNP, SSH, DHCP, Telnet
client, SNMP (planned), MQTT (planned), Wake on LAN (WOL) (planned)
Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
Port forwards, traffic rules, NAT rules, custom rules
Firewall
Network protocols
Connection monitoring
Routing
VoIP passthrough support
Static and dynamic IP allocation, DHCP Relay
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
Supported >25 service providers, others can be configured manually
Wired WAN options, each of which can be used as an automatic Failover
Balance Internet traffic over multiple WAN connections
Load balancing
DDNS (planned)
Network backup
Possibility to mount remote file system via SSH protocol (not available in standard FW)
SSHFS (optional)
DHCP
QoS / Smart Queue Manage-
ment (SQM) (planned)
4 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
1 x WAN port (can be configured as LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto
MDI/MDIX crossover
WAN
LAN
ETHERNET
NETWORK
Pre-shared key, digital certificates, X.509 certificates
Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN,
SYN-RST, X-mas, NULL flags, FIN scan attacks)
Port and tag based VLAN separation
Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only WEB filter (planned)
Attack prevention
VLAN
Authetication
Firewall
Flexible access control of TCP, UDP, ICMP packets, MAC address filter
Access control
SECURITY
DATASHEET // RUT300
Respond to one ID in range [1;255] or any
MODBUS TCP SLAVE (PLANNED)
ID filtering
Allow access through WAN
Allow remote access
Multiple clients and a server can run simultaneously, 12 encryption methods
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC,
AES-192-CBC, AES-256-CBC
OpenVPN Encryption
OpenVPN
IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
GRE tunnel
IPSec
GRE
Client/Server instances can run simultaneously, L2TPv3 support (planned)
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
Method of building scalable IPsec VPNs
PPTP, L2TP
Stunnel (planned)
VPN
DMVPN
SSTP client instance support
ZeroTier VPN client support (not available in standard FW)
WireGuard VPN client and server support (not available in standard FW)
SSTP
ZeroTier
WireGuard
Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus
TCP slave functionality
Custom registers
FEATURES
Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

Especificaciones del producto

Marca: Teltonika
Categoría: Router
Modelo: RUT300

¿Necesitas ayuda?

Si necesitas ayuda con Teltonika RUT300 haz una pregunta a continuación y otros usuarios te responderán




Router Teltonika Manuales

Router Manuales

Últimos Router Manuales