Thermador EXTNSET4 Manual de Usario

Lee a continuación 📖 el manual en español para Thermador EXTNSET4 (13 páginas) en la categoría No categorizado. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/13
THERMADOR.COM
For EXTNSET4 Blower Extension Cable Accessory Kit
Installation
INSTRUCTIONS
Page. 1
Safety
DEFINITIONS
9 WARNING
This indicates that death or serious injuries may occur
as a result of non-observance of this warning.
9 CAUTION
This indicates that minor or moderate injuries may
occur as a result of non-observance of this warning.
NOTICE: This indicates that damage to the appliance or
property may occur as a result of non-compliance with this
advisory.
Note: This alerts you to important information and/or tips.
Safety
9 IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE
INSTRUCTIONS
INSTALLER: Please leave these instructions with this unit
for the owner. Show the owner the location of the circuit
breaker. Mark it for easy reference.
OWNER: Please retain these instructions for future
reference.
WARNING
If the information in this manual is not followed exactly,
fire or shock may result causing property damage or
personal injury.
WARNING
Turn off power circuit at service panel and lock out panel
before wiring this appliance. Allow the appliance to cool
after the power has been turned off before servicing the
appliance.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS, OBSERVE THE FOLLOWING:
Use this unit only in the manner intended by the
manufacturer.
Before servicing or cleaning unit, switch power off at
service panel and lock the service disconnecting
means to prevent power from being switched on
accidentally. When the service disconnecting means
cannot be locked, securely fasten a prominent
warning device, such as a tag, to the service panel.
WARNING
ELECTRICAL SHOCK HAZARD
DO NOT remove connections.
DO NOT use an extension cord.
Improper grounding can result in a risk of
electric shock.
Failure to follow these instructions can result
in death, fire, or electrical shock.
This appliance must be grounded. In the event of an
electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric
current.
Be sure your appliance is properly installed and grounded
by a qualified technician.
If required by the National Electrical Code (or Canadian
Electrical Code), this appliance must be installed on a
separate branch circuit.
To reduce the risk of fire or electric shock, do not use this
appliance with any solid-state speed control devices.
Installation, wire harness routing, electrical connections
and grounding must comply with all applicable codes. It is
the responsibility of the owner and the installer to
determine if additional requirements and/or local or other
codes apply to specific installations.
This THERMADOR® appliance is made by
BSH Home Appliances Corporation
1901 Main Street, Suite 600
Irvine, CA 92614
Questions?
1-800-735-4328
www.thermador.com
We look forward to hearing from you!
Page. 2
9IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
CAUTION
For general ventilating use only. DO NOT use to exhaust
hazardous or explosive materials and vapors. To reduce
the risk of fire, use only metal ductwork.
Proposition 65 Warning
This product may contain a chemical known to the State of
California, which can cause cancer or reproductive harm.
Therefore, the packaging of your product may bear the
following label as required by California:
The use of multiple extension cables (EXTNCB25W) is
NOT supported.
Never modify or alter the construction of the appliance,
harness or connectors. Ensure all panels and other
components removed during installation are replaced. See
blower and hood installation manuals for complete
instructions.
CAUTION
Label all wires prior to disconnection when servicing.
Wiring errors can cause improper and dangerous
operation. Verify proper operation after servicing.
CAUTION
When using the pigtail harness to connect to a hood or
blower, be sure to reference the wiring diagram of the
hood or blower that is being connected to the pigtail
harness. Color-coding of the wiring diagram may not be
the same.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS, OBSERVE THE FOLLOWING:
Installation work and electrical wiring must be done by
qualified person(s) in accordance with all applicable
codes and standards, including fire-rated
construction.
Sufficient air is needed for proper combustion and
exhausting of gases through the flue (chimney) of fuel
burning equipment to prevent back drafting. Follow
the heating equipment manufacturer's guideline and
safety standards such as those published by the
National Fire Protection Association (NFPA), and the
American Society for Heating, Refrigeration and Air
Conditioning Engineers (ASHRAE), and the local code
authorities.
USE ONLY METAL DUCTWORK.
Ducted fans must always be vented to the outdoors.
Do not vent exhaust air into spaces within walls,
ceilings, attics, crawl spaces or garages.
When cutting or drilling into wall or ceiling, do not
damage electrical wiring and other hidden utilities.
STATE OF CALIFORNIA PROPOSITION 65 WARNING:
: WARNING
Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Especificaciones del producto

Marca: Thermador
Categoría: No categorizado
Modelo: EXTNSET4

¿Necesitas ayuda?

Si necesitas ayuda con Thermador EXTNSET4 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Thermador Manuales

No categorizado Manuales

Últimos No categorizado Manuales