Thetford K1500 SCK41 Manual de Usario

Thetford horno K1500 SCK41

Lee a continuación 📖 el manual en español para Thetford K1500 SCK41 (3 páginas) en la categoría horno. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/3
Repair instruction
PRODUCT GROUP [COOKING APPLIANCES]
PRODUCT CATEGORY [HOBS]
PRODUCT CODE : VARIOUS
WARNING! Before commencing work, disconnect the electricity and turn o the gas.
A
These instrucons are for Theord
cookers with electric hotplates. For
surface-mounted hobs please refer to
page 3. Electric hotplates should only
be removed and replaced by a
qualied competent person.
B
Remove the pan-rest(s) and all the
control knobs. Behind the knobs
locate and remove the 16/17mm
hexagonal nuts from the controls and
2 screws (where appliacable).
C
On the back edge of the control
fascia, remove the 2 screws.
D
The control fascia and prole can now
be removed. Li up and forward, and
carefully remove the spade
connecons for the ignion buon
and oven light switch, where ed.
17 02 2017- - 1/3
Repair instruction
PRODUCT GROUP [COOKING APPLIANCES]
PRODUCT CATEGORY [HOBS]
PRODUCT CODE : VARIOUS
WARNING! Before commencing work, disconnect the electricity and turn o the gas.
E
Remove any screws ed to the rear
trim and loosen the 2 screws in each
hinge, but do not remove.
F
In each black enamel burner cap
remove the retaining screw(s).
G
The enamel burner caps and cast
burner rings can now be removed.
Next remove the screws/retaining
studs found beneath the burner rings.
H
Finally, if applicable, remove the 2
screws found in the pan-
rest clips that
are holding the hob pressing in place.
17 02 2017- - 2/3
Repair instruction
PRODUCT GROUP [COOKING APPLIANCES]
PRODUCT CATEGORY [HOBS]
PRODUCT CODE : VARIOUS
WARNING! Before commencing work, disconnect the electricity and turn o the gas.
I
The hob pressing can now be raised,
giving access to the underside of the
hot plate.
J
Undo the nut holding the earth strap
in place, ensuring that you retain the
star lock washer.
K
Undo the second nut, if the bracket
doesn’t release remove the screw in
the back le corner from the top side
of the pressing. The hotplate will now
be released to remove from the
underside.
L
Take care in removing the hotplate
leads. For individual leads take note
of the posions of the leads. To
reassemble follow these instrucons
in reverse order, replacing with a new
hotplate. The hotplate is a sealed
construcon and has no user-
serviceable components.
17 02 2017- - 3/3

Especificaciones del producto

Marca: Thetford
Categoría: horno
Modelo: K1500 SCK41

¿Necesitas ayuda?

Si necesitas ayuda con Thetford K1500 SCK41 haz una pregunta a continuación y otros usuarios te responderán




horno Thetford Manuales

horno Manuales

Últimos horno Manuales