Toa BS-1034 Manual de Usario

Toa Vocero BS-1034

Lee a continuación 📖 el manual en español para Toa BS-1034 (4 páginas) en la categoría Vocero. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/4
Indicates a potentially hazardous situation which,
if mishandled, could result in death or serious
personal injury.
WARNING
Indicates a potentially hazardous situation which,
if mishandled, could result in moderate or minor
personal injury, and/or property damage.
CAUTION
1. SAFETY PRECAUTIONS
•
Before installation or use, be sure to carefully read all the
instructions in this section for correct and safe operation.
• Be sure to follow all the precautionary instructions in
this section, which contain important warnings and/or
cautions regarding safety.
• After reading, keep this manual handy for future
reference.
• As a force of approx. 18 kg (39.68 lb) is applied to the
speaker receptacle at the time of speaker installation,
attach it in a location durable enough to withstand the
force. Doing otherwise may result in the unit falling
down, causing personal injury.
• Do not use other methods than specified to mount the
bracket. Extreme force is applied to the unit and the
unit could fall off, possibly resulting in personal injuries.
• Use nuts and bolts that are appropriate for the wall's
structure and composition. Failure to do so may cause
the speaker to fall, resulting in material damage and
possible personal injury.
• Ensure that all screws are securely tightened. If they
are loose after installation, the unit could fall down,
possibly resulting in personal injury.
• To avoid electric shocks, be sure to switch off the
amplifier's power when connecting speakers.
• Do not operate the unit for an extended period of time
with the sound distorting. This is an indication of a
malfunction, which in turn can cause heat to generate
and result in a fire.
• Do not stand or sit on, nor hang down from the unit as
this may cause it to fall down or drop, resulting in
personal injury and/or property damage.
• Thin type wall mount speaker with 5" cone speaker unit
• Two-way speaker system employing a balanced dome
tweeter and elliptical horn for high-frequency sound
reproduction in combination with a 5" cone speaker
unit ensures high-quality sound. (BS-1034 and BS-
1034S)
• The speaker's smoothly curved surface in combination
with its straight lines permits it to blend in with virtually
all modern buildings.
• Equipped with a speaker receptacle, providing speaker
cable connection and installation ease.
• Equipped with a lock mechanism, preventing the
speaker from being detached easily after installation.
• In-wall wiring, exposed wiring, or bridge wiring
available for speaker cable connection
• The input power (impedance) can be easily changed
by the rear-mounted rotary switch. (BS-1034 and BS-
1034S)
• The BS-634T has a built-in attenuator and can be
connected to a 3-wire and 2-wire systems.
2. FEATURES
INSTALLATION MANUAL
WALL MOUNT SPEAKERS
BS-634
BS-634T
BS-1034
BS-1034S
Thank you for purchasing TOA's Wall Mount Speaker.
Please carefully follow the instructions in this manual to
ensure long, trouble-free use of your equipment.
3. WIRING DIAGRAMS
3.1. BS-634
8 Ω
1.7 kΩ
3.3 kΩ
0
C
R
N
HOT
COM
Matching
transformer
Speaker
Speaker
receptacle
COM
3.2. BS-634T
Attenuator
8 Ω
1.7 kΩ
0
C
R
N
Matching
transformer
Speaker
Speaker
receptacle
COM
3.3. BS-1034 and BS-1034S
8 Ω
1 kΩ
2 kΩ
3.3 kΩ
10 kΩ 0
C
R
N
COM
–
HOT
Matching
transformer
Network
cercuit
Speaker
Speaker
receptacle
COM
Rotary switch
(Factory pre-set)
500 Ω
Note
Never make 500 Ω connection in a 100 V line system.
N-terminal R-terminal
Impedance 1.7 kΩ Ω3.3 k
100 V line 6 W 3 W
70 V line 3 W 1.5 W
4. CONNECTION
4.1. BS-634 connection
5. INSTALLATION
Connect the speaker cable to the supplied speaker
receptacle. Connections differ depending on the speaker
to be installed. Read the descriptions of the
corresponding model.
The input power is set to 6 W (100 V line) by connecting
the Hot line to the N-terminal, and 3 W (100 V line) by
connecting it to the R-terminal.
(HOT)
TERMINAL
N
(COM)
C R
HOT (R/N)
COM (C)
3.3 kΩ (3 W for 100 V line,
1.5 W for 70 V line)
Speaker receptacle (Rear)
1.7 kΩ (6 W for 100 V line,
3 W for 70 V line)
The figure shows 1.7 kΩ
connection example.
4.2. BS-364T connection
(HOT)
TERMINAL
N
(COM)
C R
(HOT)
TERMINAL
N
(COM)
C R
Speaker receptacle (Rear)
Short between C
and R terminals.
[3-wire system] [2-wire system]
Normal (N)
Emergency (R)
Common (C)
HOT (N)
COM (C-R)
4.3. BS-1034 and BS-1034S connections
TERMINAL
(HOT)
N
(COM)
C R
HOT (N)
COM (C)
Speaker receptacle
(Rear)
Step 1. Attach the speaker receptacle to a wall.
[Notes on horizontal speaker mounting]
• Even if the speaker receptacle is attached horizontally,
the speaker may be tilted due to its weight unbalance
when attached to the receptacle.
• Be sure to attach the speaker so that its volume control
is positioned downward. (BS-634T only)
• When changing the logo direction, peel off the logo
carefully as it is affixed using double-faced tape. Then,
re-affix it in the right orientation.
[Exposed wiring]
Notch the top of the speaker receptacle using long-nose
pliers, then make connections.
Obstacle
Obstacle
Wall
170 mm (6.69") or more
250 mm (9.84") or more
Tapping screw 4 x 35
(accessory)
Notes on speaker receptacle mounting
70 (2.76")
"UP" mark
120 (4.72")
66.7
(2.63")
83.5
(3.29")
If the supplied tapping screws are not appropriate for the
construction of wall, separately prepare the appropriate
screws.
Install the speaker receptacle referring to its "UP" mark.
Position the receptacle at the specified distance away from
any object above and below it for vertical speaker mounting.
Keep the same distance to the right and left of the receptacle
(positioned sideways) for horizontal speaker mounting.
•
•
•
Speaker cable
Split the speaker cable into 2 branches just before it
enters the speaker receptacle so that it can be routed in
the cable-guide groove on the rear side of the speaker.
Speaker receptacle
Speaker (Rear)
Notch the top of the
speaker receptacle
using long-nose pliers.
Impedance 500 10 kΩ1 k 2 k 3.3 kΩ Ω Ω Ω
100 V line Never use this. 10 W 5 W 3 W 1 W
70 V line 10 W 5 W 2.5 W 1.5 W 0.5 W
6. DETACHING THE SPEAKER
Step 3. Hold and slide the speaker to insert its speaker
plug into the speaker receptacle.
Note
In this case, force the speaker onto the speaker
receptacle holding the speaker outer frame.
Step 4. Secure the speaker.
Turning the lock screw approximately about
3 counterclockwise turns using a Phillips
screwdriver causes the flap to rise up and stay
upright.
Caution
After speaker installation, be sure to make a
visual check that the flap rises to lock the
speaker completely.
Speaker receptacle
Speaker (Rear)
Speaker plug
Step 2. Change the input power (impedance) as
needed. (BS-1034 and BS-1034S only)
The input power (impedance) is factory-preset to
10 W (1 kΩ) for 100 V line.
When changing this setting, use a standard
screwdriver to turn the rotary switch on the
speaker's rear panel to the desired position.
Note
Be sure to follow the instructions below. Failure
to do so may cause damage to the speaker as
excessive input power is applied to it.
· Switch off the amplifier's power when changing
the input power.
· Never make 500 Ωconnection in a 100V line
system, as excessive input power is applied to
the speaker, possibly resulting in damage.
Step 1. Turn the lock screw approximately 3 clockwise
turns.
The flap lies down and stays laid. (Refer to
"About lock mechanism.")
Step 2. Hold and slide the speaker to unplug it from the
speaker receptacle.
5W
10W
1W
3W 1.5W
0.5W
2.5W
5W
10W
3.3kΩ
10kΩ
2kΩ
1kΩ
500Ω
OFF
100V
LINE
70V
LINE IMP.
Speaker (Rear)
Rotary switch
[When fixing the speaker]
[When detaching the speaker]
Lock screw
Phillips screwdriver
Speaker receptacle
Flap
Lock screw
Phillips screwdriver
Speaker receptacle
Flap
Turning the lock screw counterclockwise causes the
flap to rise up and move until it stops against the
other side of the recess.
Turning the lock screw clockwise causes the flap to
lie down and move until it stops against the front side
of the recess. (Factory preset position)
The lock mechanism is as shown below.
It prevents the speaker from being detached easily after
installation.
Note
Be sure to follow the instructions below. Failure to do so
may cause damage to the lock mechanism.
· Do not use an electric screwdriver when turning the
lock screw.
· Do not turn the lock screw more than the specified
turns.
About lock mechanism
Lock screw
Speaker receptacle
Flap

Especificaciones del producto

Marca: Toa
Categoría: Vocero
Modelo: BS-1034

¿Necesitas ayuda?

Si necesitas ayuda con Toa BS-1034 haz una pregunta a continuación y otros usuarios te responderán


Vocero Toa Manuales

Toa

Toa F-1300B Manual de Usario

8 Octubre 2024
Toa

Toa F-1300WTWP Manual de Usario

3 Octubre 2024
Toa

Toa PC-391T Manual de Usario

26 Septiembre 2024
Toa

Toa PC-391 Manual de Usario

24 Septiembre 2024
Toa

Toa PC-1860EN Manual de Usario

24 Septiembre 2024
Toa

Toa PC-2360EN Manual de Usario

24 Septiembre 2024
Toa

Toa F-1300W Manual de Usario

24 Septiembre 2024
Toa

Toa HX-5B-WP Manual de Usario

20 Septiembre 2024
Toa

Toa PC-3WR Manual de Usario

19 Septiembre 2024
Toa

Toa TZ-205 Manual de Usario

19 Septiembre 2024

Vocero Manuales

Últimos Vocero Manuales

Continental Edison

Continental Edison CELED53HP20V2B4 Manual de Usario

27 Octubre 2024
Canton

Canton Vento 830.2 Manual de Usario

27 Octubre 2024
Jamo

Jamo S7-25C Manual de Usario

27 Octubre 2024
Bowers Wilkins

Bowers Wilkins 707 S2 Manual de Usario

27 Octubre 2024
Monacor

Monacor GLS-301/GR Manual de Usario

27 Octubre 2024
Monitor Audio

Monitor Audio Silver C150 Manual de Usario

26 Octubre 2024
FBT

FBT MITUS 210M Manual de Usario

26 Octubre 2024
CyberData Systems

CyberData Systems SIP 011398 Manual de Usario

26 Octubre 2024
Lamax

Lamax PartyGo1 Play Manual de Usario

26 Octubre 2024
IKEA

IKEA SYMFONISK 405.847.50 Manual de Usario

26 Octubre 2024