Toa F-1000WTWP Manual de Usario

Toa Vocero F-1000WTWP

Lee a continuación 📖 el manual en español para Toa F-1000WTWP (18 páginas) en la categoría Vocero. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/18
OPERATING INSTRUCTIONS
SPEAKER SYSTEMS
F-1000B
F-1000BT
F-1000BTWP
F-1000W
F-1000WT
F-1000WTWP
Thank you for purchasing TOA's Speaker System.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
533-06-145-1D
2
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS ................................................................................. 3
2. GENERAL DESCRIPTION .............................................................................. 4
3. FEATURES ........................................................................................................... 4
4. DIMENSIONAL DIAGRAM .............................................................................. 4
5. IMPEDANCE CHANGE
(F-1000BT, F-1000BTWP, F-1000WT, and F-1000WTWP only)............................... 5
6. ABOUT THE INPUT OVERLOAD PROTECTION CIRCUITRY
(F-1000B, F-1000W, F-1000BT, and F-1000WT only) .............................................. 5
7. NOTES ON OUTDOOR INSTALLATION
(F-1000BTWP and F-1000WTWP only) .................................................................... 6
8. INSTALLATION
8.1. Using the Supplied Brackets
8.1.1. When using only the supplied brackets ................................................... 7
8.1.2. When using both the supplied and optional mounting brackets ............... 7
8.2. Speaker Cable Connections .............................................................................. 7
8.3. Wall Mounting .................................................................................................... 8
8.4. Ceiling Mounting .............................................................................................. 10
8.5. Speaker Stand Mounting .................................................................................. 12
8.6. Pole Mounting (F-1000BTWP and F-1000WTWP only) ................................... 13
8.7. Partition Board Mounting
(F-1000B, F-1000BT, F-1000W, and F-1000WT only) ..................................... 14
9. REPAINTING THE SPEAKER ...................................................................... 15
10. SPECIFICATIONS
10.1. F-1000B and F-1000W ................................................................................... 16
10.2. F-1000BT and F-1000WT .............................................................................. 17
10.3. F-1000BTWP and F-1000WTWP ................................................................... 18
3
When Installing the Unit
Install the unit only in a location that can
structurally support the weight of the unit and the
mounting bracket. Doing otherwise may result in
the unit falling down and causing personal injury
and/or property damage.
Do not use other methods than specified to mount
the bracket. Extreme force is applied to the unit
and the unit could fall off, possibly resulting in
personal injuries.
Use nuts and bolts that are appropriate for the
ceiling's or wall's structure and composition. Failure
to do so may cause the speaker to fall, resulting in
material damage and possible personal injury.
Tighten each nut and bolt securely. Ensure that the
bracket has no loose joints after installation to
prevent accidents that could result in personal
injury.
Do not mount the unit in locations exposed to
constant vibration. The mounting bracket can be
damaged by excessive vibration, potentially
causing the unit to fall, which could result in
personal injury.
(F-1000B, F-1000BT, F-1000W, and F-1000WT
only)
Since the unit is designed for in-door use, do not
install it outdoors. If installed outdoors, the aging of
parts causes the unit to fall off, resulting in personal
injury. Also, when it gets wet with rain, there is a
danger of electric shock.
(F-1000BTWP and F-1000WTWP only)
When installing the unit in the snowy area, take
appropriate measures to prevent snow from lying
on the unit. If the snow lies on the unit, the unit may
fall, causing personal injuries.
Do not use anti-rust lubricant. If it contacts resin or
rubber parts, they could deteriorate and cause the
unit to fall, possibly resulting in personal injury.
Do not install the unit where it is likely to be
corroded in such places as bath rooms, indoor
pools, or seaside. In such locations the bracket
may be vulnerable to corrosion, eventually allowing
the speaker to fall resulting in personal injury.
When Installing the Unit
(F-1000BT and F-1000WT only)
Never set the impedance switch to the "8 Ω"
position when connecting the unit to the amplifier's
high-impedance speaker line (70 V or 100 V line),
as doing so may damage the unit or amplifier.
Be sure to set the switch to the "8 Ω" position when
connecting to the amplifier's low-impedance line.
(F-1000BT, F-1000BTWP, F-1000WT, and F-
1000WTWP only)
Never set the impedance switch to the "330 Ω"
position when operating the unit on 100 V line.
Failure to follow this instruction could result in
damage to the unit or amplifier.
Avoid touching the unit's sharp metal edge to
prevent injury.
To avoid electric shocks, be sure to switch off the
amplifier's power when connecting speakers.
When the Unit is in Use
Do not place heavy objects on the unit as this may
cause it to fall or break which may result in
personal injury and/or property damage. In
addition, the object itself may fall off and cause
injury and/or damage.
Do not operate the unit for an extended period of
time with the sound distorting. This is an indication
of a malfunction, which in turn can cause heat to
generate and result in a fire.
Do not stand or sit on, nor hang down from the unit
as this may cause it to fall down or drop, resulting
in personal injury and/or property damage.
Have the unit checked periodically by the shop
from where it was purchased. Failure to do so may
result in corrosion or damage to the unit or its
mounting bracket that could cause the unit to fall,
possibly causing personal injury.
1. SAFETY PRECAUTIONS
Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
After reading, keep this manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
Indicates a potentially hazardous situation which,
if mishandled, could result in death or serious
personal injury.
WARNING
Indicates a potentially hazardous situation which,
if mishandled, could result in moderate or minor
personal injury, and/or property damage.
CAUTION

Especificaciones del producto

Marca: Toa
Categoría: Vocero
Modelo: F-1000WTWP

¿Necesitas ayuda?

Si necesitas ayuda con Toa F-1000WTWP haz una pregunta a continuación y otros usuarios te responderán




Vocero Toa Manuales

Toa

Toa PC-391T Manual de Usario

26 Septiembre 2024
Toa

Toa PC-391 Manual de Usario

24 Septiembre 2024
Toa

Toa PC-1860EN Manual de Usario

24 Septiembre 2024
Toa

Toa PC-2360EN Manual de Usario

24 Septiembre 2024
Toa

Toa F-1300W Manual de Usario

24 Septiembre 2024
Toa

Toa HX-5B-WP Manual de Usario

20 Septiembre 2024
Toa

Toa PC-3WR Manual de Usario

19 Septiembre 2024
Toa

Toa TZ-205 Manual de Usario

19 Septiembre 2024

Vocero Manuales

Últimos Vocero Manuales