Toa SR-RF12 Manual de Usario

Toa No categorizado SR-RF12

Lee a continuación 📖 el manual en español para Toa SR-RF12 (32 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/32

OPERATING INSTRUCTIONS

Note that casters must be prepared separately.

Thank you for purchasing TOA Line Array Speaker.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

LINE ARRAY SPEAKERS

RIGGING FRAME

RIGGING SUPPORT BRACKET

TILT JOINT BRACKET

CLUSTER BRACKET

SR-C8L

SR-C8S

SR-C15B

SR-RF8

SR-SB8

SR-TP8

SR-CL8

TABLE OF CONTENTS

1. SAFETY PRECAUTIONS ............................................................................................... 3

2. GENERAL DESCRIPTION ............................................................................................. 5

3. FEATURES .......................................................................................................................... 5

4. INSTALLATION PRECAUTIONS ................................................................................. 5

5. DIMENSIONAL DIAGRAMS

5.1. Speaker Systems

5.1.1. SR-C8L Line array speaker ................................................................................... 6

5.1.2. SR-C8S Line array speaker .................................................................................. 6

5.2. Sub-Woofer Speaker System

5.2.1. SR-C15B Line array speaker ................................................................................ 7

5.3. Frame and Brackets

5.3.1. SR-RF8 Rigging frame .......................................................................................... 7

5.3.2. SR-SB8 Rigging support bracket .......................................................................... 8

5.3.3. SR-TP8 Tilt joint bracket ....................................................................................... 8

5.3.4. SR-CL8 Cluster bracket ........................................................................................ 8

6. BI-AMPLIFIER AND SINGLE-AMPLIFIER OPERATIONS

6.1. Bi-Amplier Operation ...................................................................................................... 9

6.2. Single-Amplier Operation ............................................................................................... 9

7. SWITCHING TO SINGLE-AMPLIFIER OPERATION MODE ............................ 10

8. DIGITAL PROCESSOR SETTINGS

8.1. SR-C8L and SR-C8S Systems ....................................................................................... 11

8.2. Combined SR-C8L or SR-C8S and SR-C15B Systems ................................................. 12

9. FLYING SYSTEMS USING THE SR-RF8 RIGGING FRAME

9.1. Flying System Outline .................................................................................................... 13

9.2. Assembling the SR-RF8 Rigging Frame ........................................................................ 15

9.3. Connecting the Rigging Frame to the Speaker .............................................................. 16

9.4. Connection Between Speakers ...................................................................................... 17

9.5. About the Flying Installations ......................................................................................... 18

10.

INSTALLING THE FLYING SYSTEM USING THE SR-CL8 CLUSTER BRACKET

10.1. Flying System Outline .................................................................................................. 19

10.2. Vertical Flying Installation ............................................................................................. 19

10.3. Horizontal Flying ........................................................................................................... 21

11. SPEAKER STACKING

11.1. Stack System Outline .................................................................................................... 23

11.2. Assembling the SR-RF8 Rigging Frame ....................................................................... 24

11.3. Connecting the Rigging Frame to the Speaker ............................................................. 25

11.4. Connections Between Speakers ................................................................................... 25

11.5. About Stacking ............................................................................................................. 26

12. USING THE SR-SB8 RIGGING SUPPORT BRACKET ...................................... 27

12.1. Level Adjuster Installation ............................................................................................ 27

12.2. Rigging Support Bracket Installation ............................................................................ 27

12.3. Frequent Attachment and Detachment of the Rigging Support Bracket ...................... 28

12.4. Adjust the Height With a Level Adjuster to Prevent Unstable Installation .................... 28

13. TILTING THE SPEAKER DOWNWARD .................................................................. 29

14. SPECIFICATIONS

14.1. SR-C8L and SR-C8S .................................................................................................... 30

14.2. SR-C15B ....................................................................................................................... 30

14.3. SR-RF8 ......................................................................................................................... 31

14.4. SR-SB8 ......................................................................................................................... 31

14.5. SR-TP8.......................................................................................................................... 31

14.6. SR-CL8 ......................................................................................................................... 31

1. SAFETY PRECAUTIONS

When Installing the Unit

• Avoid installing or mounting the unit in unstable

locations, such as on a rickety table or a slanted

surface. Doing so may result in the unit falling

down and causing personal injury and/or property

damage.

• Refer all installation work to the dealer from whom

the speaker was purchased. Installation for flying

requires extensive technical knowledge and

experience. The speaker may fall off if incorrectly

installed, resulting in possible personal injury.

• Flying precautions.

Be sure to follow the instructions below. Otherwise,

the suspension wires or belts may be off or snap

and the speaker may fall off, causing personal

injury.

· Check to confirm that the suspension wires and

belts are strong enough to

· The connectors of the suspension wires and belts

must be securely linked with those of the

speaker.

· All parts and components (such as enclosures,

metal pieces, and screws) must be free from any

deformation, crack, and corrosion.

· Be sure to use screws supplied with the optional

flying hardware when installing the speaker using

such hardware.

• Install the unit only in a location that can

structurally support the weight of the unit and the

mounting bracket. Doing otherwise may result in

the unit falling down and causing personal injury

and/or property damage.

• Since the unit is designed for in-door use, do not

install it outdoors. If installed outdoors, the aging of

parts causes the unit to fall off, resulting in personal

injury. Also, when it gets wet with rain, there is a

danger of electric shock.

• Owing to the unit's size and weight, be sure that at

least two persons are available to install the unit.

Failure to do so could result in personal injury.

When Installing the Unit

• Do not use other methods than specified to mount

the bracket. Extreme force is applied to the unit

and the unit could fall off, possibly resulting in

personal injuries.

• Use nuts and bolts that are appropriate for the

ceiling's or wall's material and structure. Failure to

do so may cause the unit to fall, resulting in

material damage and possible personal injury.

• Tighten each nut and bolt securely. Ensure that the

bracket has no loose joints after installation to

prevent accidents that could result in personal

injury.

• Use the specified mounting bracket in combination.

Doing otherwise may cause the unit or component

to fall off, resulting in personal injury.

• Do not mount the unit in locations exposed to

constant vibration. The mounting bracket can be

damaged by excessive vibration, potentially

causing the unit to fall, which could result in

personal injury.

• Do not install the unit in indoor swimming pools or

such locations where corrosion may occur easily.

The parts deteriorate if corroded, causing the unit

to fall, which could result in personal injury.

• Be sure to read this safety instructions in this section carefully in prior to use.

• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or

cautions regarding safety.

• After reading, keep this manual handy for future reference.

Safety Symbol and Message Conventions

Safety symbols and messages described below are used in this manual to prevent bodily injury and property

damage which could result from mishandling. Before operating your product, read this manual first and

understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.

WARNING

Indicates a potentially hazardous situation which, if mishandled, could

result in death or serious personal injury.

Indicates a potentially hazardous situation which, if mishandled, could

result in moderate or minor injury, and/or property damage.

WARNING

CAUTION

Especificaciones del producto

Marca:	Toa
Categoría:	No categorizado
Modelo:	SR-RF12
Peso.:	634120 g
Ancho:	599.4 mm
Profundidad:	850.9 mm
Altura:	1600.2 mm
Nivel de ruido:	65 dB
Peso del embalaje:	684920 g
Ancho del embalaje:	701 mm
Empaquetadura en profundidad:	960.1 mm
Altura del embalaje:	1800.9 mm
Manual de usuario:	Ja
Indicadores LED:	Ja
factor vorm:	Tower
País de origen:	China
Color-de-la-carcasa.:	Zwart
numero de fans:	8 ventilator(en)
Incluyendo tornillos:	Ja
Número de tornillos:	24
Tipo de enfriamiento:	Ventilator
Eficiencia:	96.5 procent
Disipación de calor:	14334 BTU/h
Altura del paquete principal (exterior):	1800.9 mm
Ancho del embalaje principal (exterior):	701 mm
Peso bruto del embalaje principal (exterior):	684920 g
Longitud del paquete principal (exterior):	960.1 mm
Cantidad por caja principal (exterior):	1 stuk(s)
voltaje-de-entrada-de-CA:	480 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Tipos de enchufes:	Hardwire
Diámetro del ventilador:	120 mm
Número de fases de entrada:	3
Número de fases de salida:	3
Capacidad de carga:	60000 VA
voltaje de salida de CA:	480 V
Tipo corriente alterna (CA):	Hardwire
Corriente de entrada (transformador de entrada):	101 A
Corriente de irrupción (transformador de entrada):	920 A
Corriente de salida (transformador de entrada):	225 A
Eficiencia (a media carga):	97.5 procent
Corriente de entrada (transformador de salida):	173 A
Corriente de irrupción (transformador de salida):	2020 A
Corriente de salida (transformador de salida):	72 A
Paneles inferiores incluidos:	Ja
Número de paneles inferiores:	4