Trek Powerfly FS 4 Gen 2 Manual de Usario

Trek Bicicleta Powerfly FS 4 Gen 2

Lee a continuación 📖 el manual en español para Trek Powerfly FS 4 Gen 2 (10 páginas) en la categoría Bicicleta. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/10

2021 POWERFLY FULL SUSPENSION

SERVICE MANUAL SUPPLEMENT

Table of Contents

Install the rear fender and rear rack 1

Install the rear mini fender 2

Install the front fender 2

Remove the rear shock 3

Install the rear shock 4

Install the rear derailleur hanger 5

Cable routing 6

Remove the early Bosch RIB system 7

Install the early Bosch RIB system 9

Remove the new RIB system 10

Install the new RIB system 11

Bosch drive unit removal/installation 15

Aftermarket spec limitations 15

 2021PoweryFullSuspensionservicemanualsupplement

NOTE This manual has the unique design

features and components for the 2021 Powery

FS bicycle.

 2021PoweryFullSuspensionservicemanualsupplement

Install the rear mini fender

1. Remove the rear wheel.

2. Use the two M5x0.8x14mm bolts and at

washers to attach the mini fender to the two

holes at the top of the seatstay.

NOTE Make sure these bolts have

threadlocker applied.

a. If you are reusing these bolts, clean

with isopropyl alcohol and apply Loctite

242 threadlocker or similar prior to

attachment.

3. Torque the bolts to 6Nm.

TWO BOLTS

& WASHERS

MINI FENDER

Install the front fender

NOTE The 27.5 model has a different

front fender than the 29er model.

1. Use an M5 bolt and washer to attach the

U-shaped front fender strut to the fender.

LOWER FORK

ARCH

FENDER STRUT

STRUT TO

FRONT FORK

2. Torque the bolt to 2.5Nm.

3. Use an M6 bolt to attach the fender and strut

assembly to the lower fork arch.

NOTE Make sure the lower fork arch bolt

has threadlocker applied.

a. If you are reusing the fork arch bolt,

clean with isopropyl alcohol and apply

Loctite 242 threadlocker or similar prior

to attachment.

4. Torque the bolt to 9Nm.

5. Use two M5 bolts to attach the struts to the

front fork.

NOTE Make sure the strut bolts have

threadlocker applied.

a. If you are reusing the strut bolts, clean

with isopropyl alcohol and apply Loctite

242 threadlocker or similar prior to

attachment.

6. Torque the strut bolts to 6Nm.

Especificaciones del producto

Marca:	Trek
Categoría:	Bicicleta
Modelo:	Powerfly FS 4 Gen 2
Color del producto:	Black, Red
Peso.:	149 g
Ancho:	150 mm
Profundidad:	5 mm
Altura:	225 mm
Manual de usuario:	Ja
Mostrar.:	LCD
Diagonal de la pantalla:	8.5 "
Resolución:	- lpi
Tecnología de conectividad:	Draadloos
Incluye ratón:	Nee
Incluye bolígrafo:	Ja
Agujas:	Ja
Tipo-de-visualización:	LCD
Tipo de Batería:	CR2020 / CR2016
Área de trabajo:	- mm
Altura máxima de lectura:	- mm
bolígrafo inalámbrico:	Ja
Pluma de precisión:	- mm
Peso de la tableta:	149 g
colores de escritura:	Wit