Tripp Lite B140-101X-U Manual de Usario

Tripp Lite No categorizado B140-101X-U

Lee a continuación 📖 el manual en español para Tripp Lite B140-101X-U (4 páginas) en la categoría No categorizado. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/4
Owner’s Manual
DVI over Cat5 Extender Kit
Model: B140-101X-U
• Extends a DVI-D signal up to 125 ft. at 1920 x 1200 @ 60Hz, including 1080p
• Receiver unit features built-in Equalization control for video adjustment
• USB Micro-B port supplies power to the receiver unit; no external power supply
required
• Compatible with all operating systems
• Plug and play; no software or drivers required
• HDCP compatible
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an
ISOBAR6ULTRA surge protector—
a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2015 Tripp Lite. All rights reserved.
Package Includes
• B140-101X-U Transmitter Unit
• B140-101X-U Receiver Unit
• USB Micro-B Cable – 3 ft.
• Screwdriver
• Owner’s Manual
15-08-270-9334A4.indd 1 10/1/2015 11:55:29 AM
2
Optional Accessories
System Requirements
Installation
• N202-Series Cat6 24 AWG Solid Wire
Patch Cables
• UR05C-Series USB Micro-B Charge-
Only Cables
• U280-002-W12 2-Port USB Wall
Charger
• UAC-1B 1-Port USB Wall Charger
• Computer with a DVI output port • Display with a DVI input port
1. Connect the transmitter unit’s built-in DVI cable to the computer’s DVI output port.
2. Connect the RJ45 port on the transmitter to the RJ45 port on the receiver using
Cat5e/6 cable.
Note: See the installation diagram for maximum extension distance and video resolutions.
3. Connect the receiver unit’s built-in DVI cable to a DVI monitor input port.
4. Connect the included USB Micro-B cable to the receiver unit and a USB port on
the display or a USB wall outlet.
5. Power on the DVI source and DVI display. The green LEDs on the transmitter’s
and receiver’s RJ45 ports will illuminate to indicate they are receiving power. The
orange LEDs on the receiver’s RJ45 ports will illuminate to indicate it is receiving a
signal from the source.
The orange LED on the transmitter’s RJ45 port does not illuminate.Note:
6. If necessary, adjust the Equalization control on the remote unit to improve the
video image.
Note: An improper Equalization setting can cause the monitor to not display a picture. Try
each Equalization setting until an acceptable image is displayed.
Notes:
1. Test to make sure the entire installation works properly before pulling cables through ceilings/
walls.
2. To achieve maximum distance and performance, 24 AWG solid wire Cat5e/6 cable must be
used. The use of stranded wire Cat5e/6 cable or cable with a gauge size higher than 24 AWG
will result in a shorter extension distance. All Tripp Lite N202-Series Cat6 cables are made with
24 AWG solid-wire cabling.
3. Make sure the power to all connected devices is turned off prior to installation.
13
2
24 AWG SOLID-WIRE
CAT5/6 CABLE
DVI
COMPUTER
DVI DISPLAY
Up to 125 ft. at 1080p,
1920 x 1200
4
15-08-270-9334A4.indd 2 10/1/2015 11:55:29 AM
3
Troubleshooting
If you are unable to get an acceptable image after following the installation
instructions, try the troubleshooting tips below:
1. Is the USB Micro-B cable that shipped with the product connected and
plugged into a working power source? For the product to function properly, the
receiver must be connected to and receiving power from the USB Micro-B cable.
2. Was the power to the DVI source turned off prior to installation? If not,
restart your computer.
3. What resolution are you trying to reach? Installation See the section in this
manual for details on maximum distance and resolution. The shorter the extension
distance, the higher the resolution you will be able to obtain. If you are not able to
get an acceptable image, try lowering your computer’s video resolution or adjusting
the refresh rate.
4. What type of cabling are you using? Inferior cabling can result in poor
performance, so it is important that you use cables that can support the video
resolution you are trying to obtain. To achieve maximum distance and resolution,
24 AWG solid-wire UTP cable (such as Tripp Lite’s N202-Series cables) must be
used.
5. Test your cables to ensure they are working properly. For example, connect
your Cat5e/6 cable between a computer and a network to verify that it establishes
a network connection.
6. Do you have any patch panels or other devices in between the transmitter
and receiver units? Tripp Lite’s DVI over Cat5 Extender Kit is designed to be
connected directly from the transmitter to the receiver via UTP cable. The more
connection points that are between the source and the remote monitor, the more
likely signal degradation will occur, causing poor performance. If you have a patch
panel or other device in between, it should be removed from the installation.
7. Do you have a splitter, switch or other device in between the computer
and transmitter, or in between the receiver and display? Tripp Lite’s DVI
over Cat5 Extender Kit is designed for the transmitter to connect directly with
the source computer and for the receiver to connect directly to the display. If you
have a splitter, switch, or other device in between, it should be removed from the
installation.
8. Check your cabling for any damage that may have occurred during
installation. If a cable connector is loosened from pulling through ceilings/walls or
the cable jacket is damaged, causing the wiring to be exposed, you will not be able
to achieve maximum performance.
9. Are the transmitter and/or receiver units located in an area that exposes
them to elevated temperatures? If the product is overheating, it will not function
properly.
15-08-270-9334A4.indd 3 10/1/2015 11:55:29 AM

Especificaciones del producto

Marca: Tripp Lite
Categoría: No categorizado
Modelo: B140-101X-U

¿Necesitas ayuda?

Si necesitas ayuda con Tripp Lite B140-101X-U haz una pregunta a continuación y otros usuarios te responderán


No categorizado Tripp Lite Manuales

Tripp Lite

Tripp Lite EBP240V3501NB Manual de Usario

21 Octubre 2024
Tripp Lite

Tripp Lite SmartRack SR45UBEXPNDNR3 Manual de Usario

20 Octubre 2024
Tripp Lite

Tripp Lite SmartRack SRW12US Manual de Usario

19 Octubre 2024
Tripp Lite

Tripp Lite SmartRack SRWALLBRKT2U Manual de Usario

18 Octubre 2024
Tripp Lite

Tripp Lite B127A-1A1-BDBH Manual de Usario

12 Octubre 2024
Tripp Lite

Tripp Lite BP36V15-2U Manual de Usario

9 Octubre 2024
Tripp Lite

Tripp Lite RBC92-2U Manual de Usario

9 Octubre 2024
Tripp Lite

Tripp Lite SU6KRT3UX Manual de Usario

8 Octubre 2024
Tripp Lite

Tripp Lite SRCOMBO Manual de Usario

8 Octubre 2024
Tripp Lite

Tripp Lite PS-406-HGULTRA Manual de Usario

7 Octubre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024