Tripp Lite B150-1A1-DVI Manual de Usario

Lee a continuación 📖 el manual en español para Tripp Lite B150-1A1-DVI (8 páginas) en la categoría No categorizado. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
Owner’s Manual
DisplayPort to DVI over
Cat5 Extender Kit
Model: B150-1A1-DVI
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2015 TRIPP LITE. All rights reserved.
15-11-118-933506-EN.indd 1 11/13/2015 2:29:38 PM
2
Product Features
Package Includes
Optional Accessories
System Requirements
Converts a DisplayPort video signal for use with a DVI display
Extends a 1920 x 1080 (1080p) @ 60 Hz video signal up to 125 ft.
Supports 24-bit True Color (8 bits per channel)
Micro USB ports supply power to the transmitter and receiver units—
no external power supplies required
Plug and play—no software or drivers required
B150-1A1-DVI Transmitter Unit
B150-1A1-DVI Receiver Unit
Screwdriver for Equalization Adjustment
(x2) Micro USB Cables – 3 ft.
Owner’s Manual
N202-Series Cat6 24 AWG Solid-Wire Patch Cables
UR05C-Series USB Micro-B Charge-Only Cables
U280-002-W12 2-Port USB Wall Charger
UAC-1B 1-Port USB Wall Charger
Computer with DisplayPort output port
Display with DVI input port
15-11-118-933506-EN.indd 2 11/13/2015 2:29:38 PM
3
Installation
Note:
1. Test to make sure the entire installation works properly before pulling cables
through ceilings/walls.
2. To achieve maximum distance and performance, 24 AWG solid-wire Cat5e/6
cable must be used. The use of stranded-wire Cat5e/6 cable or cable with a
gauge size higher than 24 AWG will result in a shorter extension distance. All
TRIPP LITE N202-Series Cat6 cables are made with 24 AWG solid-wire cabling.
3. Make sure the power to all connected devices is turned off prior to installation.
14
3
24 AWG SOLID-WIRE
CAT5/6 CABLE
DISPL AYPORT
COMPUTER
DVI
DISPL AY
Up to 125 ft. at 1920 x 1080 (1080p) @ 60 Hz
25
1. Connect the transmitter units built-in DisplayPort cable to the
computer’s DisplayPort output port.
2. Connect the included USB Micro-B cable to the transmitter unit and a
USB port on the computer or a USB wall outlet. The green and orange
LEDs on the transmitter unit’s RJ45 ports will illuminate to indicate it is
receiving power from the USB Micro-B cable.
3. Connect the RJ45 port on the transmitter to the RJ45 port on the
receiver using Cat5e/6 cable.
Note: See the installation diagrams for maximum extension distance and video
resolutions.
4.
Connect the receiver unit’s built-in DVI cable to a DVI monitor input port.
5. Connect the included USB Micro-B cable to the receiver unit and a
USB port on the display or a USB wall outlet. The green LED on the
receiver’s RJ45 port will illuminate to indicate it is receiving power from
the USB Micro-B cable.
15-11-118-933506-EN.indd 3 11/13/2015 2:29:39 PM

Especificaciones del producto

Marca: Tripp Lite
Categoría: No categorizado
Modelo: B150-1A1-DVI

¿Necesitas ayuda?

Si necesitas ayuda con Tripp Lite B150-1A1-DVI haz una pregunta a continuación y otros usuarios te responderán




No categorizado Tripp Lite Manuales

No categorizado Manuales

Últimos No categorizado Manuales