Tripp Lite N052-048 Manual de Usario

Lee a continuación 📖 el manual en español para Tripp Lite N052-048 (8 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
Quick Start Guide
Installation
1
3
2
4
Cat5/5e/6/6a 110-Type UTP Patch Panels
Models: N052-024, N052-048, N252-024, N252-024-6A, N252-024-6A-OF, N252-048
Español 3 • Français 5 • Русский 7
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved.
22-24 AWG
Avoid gaps
Wrap strap
around cables.
Figure 1: T568A/B Wiring Scheme
Strip the cable jacket approximately 1.25 in. (30 mm).
Use a 110 impact tool for termination.
Note: Set the tool to the “Low Impact” setting.
Seat each wire according to the wiring scheme shown in Figure 1.
Ensure the untwisted length is as short as possible. Avoid overlapping
one pair over the others.
Note: 110 punchdown orientation may vary by model.
In order to maintain stable performance, ensure the cable bundles
are secured with the attached straps.
2
Warranty & Product Registration
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Lifetime Limited Warranty
TRIPP LITE warrants this product to be free from original defects in materials and workmanship for its lifetime. TRIPP LITE’s obligation under this warranty is
limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material
Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE
service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of
purchase. This warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or modified in any
way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s)
may not apply to the purchaser. EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is
not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by
third parties, or otherwise.
PRODUCT REGISTRATION
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite
product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
3
Guía de Inicio Rápido
Instalación
1
3
2
4
Paneles de Conexiones UTP
Cat5 / Cat5e / Cat6 / Cat6a Tipo 110
Modelos: N052-024, N052-048, N252-024, N252-024-6A, N252-024-6A-OF, N252-048
English 1 • Français 5 • Русский 7
1111 W. 35th Street, Chicago, IL 60609 EE. UU. • www.tripplite.com/support
Copyright © 2017 Tripp Lite. Todos los derechos reservados
22 - 24 AWG
Evite espacios
Enrolle la cinta
alrededor de los cables.
Figura 1: Esquema de Cableado T568A/B
Pele el forro del cable aproximadamente 30 mm [1.25”].
Para el acabado use una herramienta de impacto 110.
Nota: Ajuste la herramienta en “Low Impact” [Bajo impacto].
Asiente cada cable según el esquema de cableado mostrado en la
Figura 1. Asegúrese de que la longitud destorcida sea lo más corta
posible. Evite traslapar un par sobre otro.
Nota: La orientación de la inserción a presión 110 puede variar según el
modelo.
Para mantener un rendimiento estable, garantice que los grupos de
cables estén asegurados con las cintas adjuntas.

Especificaciones del producto

Marca: Tripp Lite
Categoría: No categorizado
Modelo: N052-048

¿Necesitas ayuda?

Si necesitas ayuda con Tripp Lite N052-048 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Tripp Lite Manuales

No categorizado Manuales

Últimos No categorizado Manuales