Tripp Lite SPS406HGULTRA Manual de Usario

Tripp Lite No categorizado SPS406HGULTRA

Lee a continuación 📖 el manual en español para Tripp Lite SPS406HGULTRA (8 páginas) en la categoría No categorizado. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
1
Owner's Manual
SPS406HGULTRA
(Series Number: AGIB8116)
Surge Protector
Approved for Patient Care Areas
IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
WARNING!
Use of this equipment in life support applications where failure of this equipment can
reasonably be expected to cause the failure of the life support equipment or to significantly
affect its safety or effectiveness is not recommended. Do not use this equipment within
oxygen-enriched atmospheres, or within 0.3 m (1 ft.) of a point at which an oxygen-enriched
atmosphere is intentionally vented.
CAUTION!
DO NOT connect to an ungrounded outlet. DO NOT use with extension cords or adapters that
eliminate the connection to ground. The surge protector is designed for indoor use only.
Install the surge protector away from heat emitting appliances such as radiators or heat
registers. Do not install where excessive moisture or other conductive contaminants are
present. Never install electrical wiring during a lightning storm.
AUTOMATIC OPERATION!
The surge protector includes a ground detection and power polarity detection circuit with LED
for added safety. When the surge protector is plugged into a wall outlet, it detects whether a
proper ground is present. If a proper ground is detected, the green LED illuminates and AC
power is routed to the output receptacles. If a proper ground is not detected, the LED does
not illuminate and AC power is not routed to the output receptacles. The surge protector also
features an internal protection that will disconnect the surge-protective component at the
end of its useful life. The surge protector will distribute AC power and the LED will illuminate
only when all of its surge suppression components are functioning properly and it is
connected to a properly-wired AC outlet.
US Patent #7,375,939 and #8,339,759
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2016 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $100 value!
www.tripplite.com/warranty
16-01-054-93358A.indb 1 1/21/2016 12:41:07 PM
2
1) Connect Your Surge Protector to Your AC Power Line
Plug the power cord into a utility outlet. The surge protector’s power cord should only be
connected to a standard 3-wire grounded 120V AC 60 Hz outlet.
2) Connect AC Equipment to Your Surge Protector
Plug the AC power cords of your equipment into your surge protector. Do not use extension
cords or adapters that eliminate the connection to ground. DO NOT OVERLOAD your surge
protector. Each outlet can handle a load of up to 12A, but do not exceed a total load of
more than 12A for all outlets. If the circuit breaker trips, outlets will cease to provide power.
Reduce the load on the surge protector down to your unit’s amp rating by unplugging excess
equipment, then depress the circuit breaker button to reset and restore power.
Installation
Lifetime Limited Warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
The seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for its
lifetime. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole discretion.
Service under this Warranty can only be obtained by your delivering or shipping the product (with all shipping or delivery charges prepaid) to: Tripp Lite,
1111 W. 35th St., Chicago, IL 60609. Seller will pay return shipping charges.THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE
RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET
FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF
MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES
ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This Warranty gives
you specific legal rights, and you may have other rights which vary from jurisdiction to jurisdiction.)To receive service under this warranty, you must be the
original purchaser/user of the product in question. You must obtain a Returned Material Authorization (RMA) number from TRIPP LITE. Products must be
returned to TRIPP LITE with transportation charges prepaid and must be accompanied by a brief description of the problem and proof of date and place of
purchase. TRIPP LITE; 1111 W. 35th St.; Chicago, IL 60609
WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since
individual applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices
for any specific application.
WARRANTY REGISTRATION
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered into a drawing for a chance to
win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Service
Your Tripp Lite product is covered by the warranty described in this manual. A variety of Extended Warranty and On-Site Service Programs are also available
from Tripp Lite. For more information on service, visit www.tripplite.com/support. Before returning your product for service, follow these steps:
1. Review the installation and operation procedures in this manual to insure that the service problem does not originate from a misreading of the
instructions.
2. If the problem continues, do not contact or return the product to the dealer. Instead, visit www.tripplite.com/support.
3. If the problem requires service, visit www.tripplite.com/support and click the Product Returns link. From here you can request a Returned Material
Authorization (RMA) number, which is required for service. This simple on-line form will ask for your unit’s model and serial numbers, along with other
general purchaser information. The RMA number, along with shipping instructions will be emailed to you. Any damages (direct, indirect, special or
consequential) to the product incurred during shipment to Tripp Lite or an authorized Tripp Lite service center is not covered under warranty. Products
shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation charges prepaid. Mark the RMA number on the outside of the
package. If the product is within its warranty period, enclose a copy of your sales receipt. Return the product for service using an insured carrier to the
address given to you when you request the RMA.
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series
number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information
for this product, always refer to the series number. The series number should not be confused with the marking name or model number of the product.
WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and
electronic equipment from Tripp Lite they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste
Tripp Lite has a policy of continuous improvement. Product specifications are subject to change without notice.
16-01-054-93358A.indb 2 1/21/2016 12:41:07 PM
3
Manual del Propietario
SPS406HGULTRA
(Número de Serie: AGIB8116)
Supresor de Sobretensiones
Aprobado para áreas del cuidado de pacientes
INSTRUCCIONES DE SEGURIDAD IMPORTANTES.
CONSERVE ESTAS INSTRUCCIONES.
¡ADVERTENCIA!
El uso de este equipo en aplicaciones de soporte de vida en donde la falla de este equipo
pueda razonablemente hacer suponer que causará fallas en el equipo de soporte de vida o
afecte significativamente su seguridad o efectividad, no está recomendado. No use este
equipo en atmósferas enriquecidas con oxígeno o a distancias inferiores a 0.3 m de un
punto en que se ventile deliberadamente una atmósfera enriquecida con oxígeno.
¡PRECAUCIÓN!
NO conecte a un tomacorriente sin conexión a tierra. No use con cables de extensión o
adaptadores que eliminen la conexión a tierra. El supresor de sobretensiones está diseñado
para uso en interiores solamente. Instale el supresor de sobretensiones alejado de aparatos
emisores de calor como radiadores o rejillas de calefacción. No instalar en donde haya
humedad excesiva u otros contaminantes conductores. Nunca instale cableado eléctrico
durante una tormenta eléctrica.
¡OPERACIÓN AUTOMÁTICA!
El supresor de sobretensiones incluye una detección de tierra y detección de polaridad de
alimentación con LEDs para una seguridad aumentada. Cuando el supresor de
sobretensiones está enchufado a una toma de pared, detecta si hay una conexión a tierra
adecuada. Si se detecta una conexión a tierra adecuada, el LED verde se enciende y la
energía de CA es conducida a los tomacorrientes. Si no se detecta una conexión a tierra
adecuada, el LED no se enciende y la energía de CA no es conducida a los tomacorrientes.
El supresor de sobretensiones cuenta además con una protección interna que desconectará
el componente supresor de sobretensiones al final de su vida útil. El supresor de
sobretensiones distribuirá la alimentación de CA y el LED se encendesolo cuando sus
componentes de supresión de sobretensiones funcionen correctamente y esté conectado a
una salida CA correctamente cableada.
No. de Patente de USA #7,375,939 y #8,339,759
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
© 2016 Tripp Lite. Reservados todos los derechos.
16-01-054-93358A.indb 3 1/21/2016 12:41:08 PM

Especificaciones del producto

Marca: Tripp Lite
Categoría: No categorizado
Modelo: SPS406HGULTRA

¿Necesitas ayuda?

Si necesitas ayuda con Tripp Lite SPS406HGULTRA haz una pregunta a continuación y otros usuarios te responderán




No categorizado Tripp Lite Manuales

No categorizado Manuales

Últimos No categorizado Manuales