Tripp Lite SRCOOLNET2LX Manual de Usario

Lee a continuación 📖 el manual en español para Tripp Lite SRCOOLNET2LX (40 páginas) en la categoría No categorizado. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/40
Installation and
Quick Start Guide
SNMP/Web Management Accessory
Model: SRCOOLNET2LX
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2018 Tripp Lite. All rights reserved.
Read this guide carefully before installation. A separate downloadable User’s
Guide can be found by going to www.tripplite.com/support and typing
SRCOOLNET2LX in the search field. Refer to the User's Guide for additional
information about configuration and operation.
Installation 2
Features 10
Tech Support 12
Warranty 12
Product Registration and 13
Regulatory Compliance
Español 14
Français 27
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
18-06-379-93387E.indb 1 7/26/2018 4:19:58 PM
2
The SRCOOLNET2LX allows a user to communicate with and control Tripp Lite’s
SRCOOL2KWM, SRCOOL7KRM, SRCOOL18K, SRCOOL24K (pre-installed in unit) spot
coolers, and compatible SRCOOL33K row-based cooler as manageable devices on a
network accessible via Web browser, network management station, telnet, SSH or
command line.
1 - Preparation
1-1 Confirm Package Contents: In addition to this manual, your package should
include the following:
Micro-USB cable for remote temperature sensing and configuration
(part number: 73176E), 12 ft.
EnviroSense2 E2MT Sensor Module
E2MT User Manual
1-2 Locate MAC Address: The 12-digit MAC address (000667xxxxxx) is located on
the SRCOOLNET2LX.
Installation
2 Installation
2-1 Insert the SRCOOLNET2LX into the front SNMP accessory slot on the
SRCOOL2KWM/7KWM/18K/24K spot coolers or compatible SRCOOL33K
row-based cooler (Figure 1 in section 4-2).
2-2 Connect SRCOOLNET2LX to Network: Connect a standard Ethernet patch
cable to the RJ45 Ethernet port on the SRCOOLNET2LX.
Note: This port does not support PoE (Power over Ethernet) applications.
2-3 Determine Network Installation Method: If your network's DHCP server will
assign a dynamic IP address to the SRCOOLNET2LX automatically, proceed to
3 - Dynamic IP Address Assignment. If you will assign a static IP address to
the SRCOOLNET2LX manually, proceed to . If 4 - Static IP Address Assignment
you are uncertain which method to use, contact your network administrator for
assistance before continuing the installation process.
18-06-379-93387E.indb 2 7/26/2018 4:19:58 PM
3
Installation
3 - Dynamic IP Address Assignment
3-1 Connect SRCOOLNET2LX to Network: By default, the SRCOOLNET2LX will
attempt to obtain an IP address via DHCP. This may take as long as several
minutes, depending on your network environment.
3-2 Discover IP Address: To identify the IP address assigned to the
SRCOOLNET2LX, contact your network administrator and provide the MAC
address of the SRCOOLNET2LX. You can also determine the IP address locally at
the card. If you do not already have the serial over USB driver installed on your
PC, you can download it from www.tripplite.com/support by typing
SRCOOLNET2LX in the search field. Select the driver named “TL-cdc”. To install,
follow the instructions provided with the driver.
Once the driver is installed and the COM port has been assigned, start a
terminal emulation program, such as Tera Term Pro. Configure it to use the
assigned COM port and use the following serial port settings: 115.2Kbps, 8,
NONE, 1. Connect the USB cable to the PC and the Micro-USB end to the
Micro-USB port on the SRCOOLNET2LX. When the login prompt appears, login as
localadmin / localadmin. When the Menu appears, navigate to "3- Network
Configuration", then to "1- IP Configuration". The assigned IP address will be
displayed. After you have determined the IP address, proceed to section 5 - Test
and Configure.
Notes:
Usernames and passwords are case sensitive.
You may wish to request a long-term lease period for the IP address, depending on your
application.
PowerAlert® Device Manager and the WEBCARDLX support both IPv4 and IPv6. The card
is set up by default to receive a DHCP address for IPv4, IPv6 or both. Receiving both
addresses allows connection to the card via either the IPv4 or IPv6 address.
18-06-379-93387E.indb 3 7/26/2018 4:19:58 PM

Especificaciones del producto

Marca: Tripp Lite
Categoría: No categorizado
Modelo: SRCOOLNET2LX

¿Necesitas ayuda?

Si necesitas ayuda con Tripp Lite SRCOOLNET2LX haz una pregunta a continuación y otros usuarios te responderán




No categorizado Tripp Lite Manuales

No categorizado Manuales

Últimos No categorizado Manuales