Tripp Lite T014-001 Manual de Usario

Lee a continuación 📖 el manual en español para Tripp Lite T014-001 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
1
Owner’s Manual
All-in-One Cable Tester
Model: T014-001
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2015 Tripp Lite. All rights reserved.
15-11-100-9334E3-EN.indd 1 11/20/2015 2:07:01 PM
2
Package Includes
Operation
Product Features
T014-001 All-in-One Cable Tester
BNC to RJ11 Adapter
Carrying Case
Owner’s Manual
Testing is as simple as connecting the desired cable and pressing the button.
When testing an uninstalled patch cable, you can leave the Main and
Remote testers connected. For testing BNC cable, the included BNC to RJ11
adapter will be needed to connect to the RJ11 port on the Remote tester.
When testing installed cable, you will have to remove the Remote Tester
from the Main Tester. Connect one end of the cable to the appropriate
connector on the Main Tester and the other end of the cable to the
appropriate connector on the Remote Tester.
Upon pressing the test button, you will hear one or more beeps from the Main
Tester, and the LEDs on the Main Tester will illuminate to indicate the
results:
All-in-one cable tester combines a Main Tester unit with a Removable
Remote Tester unit
Test cable connectivity, determining a connection, no connection, short or
crossed connection
Allows for testing of multiple cable types: RJ11, RJ45, USB, and BNC
Test cable lengths up to 600 ft. (180 m)
Battery status LED indicates whether the battery is good, or is low and
needs to be replaced
Testing is as simple as pressing a button
15-11-100-9334E3-EN.indd 2 11/20/2015 2:07:01 PM
3
Operation (continued)
Short – If there is a short in the cable, three beeps will sound, and the
SHORT PinLED will illuminate. In addition, the LED(s) for the pin(s) where a
short exists will illuminate.
Connected – When a connection from one end of the cable to the other is
found, a low-to-high beep will sound and the LED will illuminate. Also, PASS
the of any pin(s) where a connection is found will illuminate. Listed Pin LEDs
below are the pins that are supposed to be connected for each connector
type. If all of the necessary pins for your connector type do not illuminate,
those that do not illuminate are open.
– Pins 1 through 8 should be connectedRJ45 (UTP)
– Pins 1 through 8 and the S pin should be connectedRJ45 (STP)
– RJ11 cables can be 2-wire, 4-wire, or 6-wire. 2-wire RJ11 RJ11
cables use pins 3 and 4, 4-wire pins 2-5, and 6-wire pins 1-6
Pins 1-4 and the S pin should be connectedUSB
– Pins 1 and 2 should be connectedBNC
Crossed – If there are crossed wires in a cable, such as in a crossover
cable, two beeps will sound and the LED will illuminate. The CROSS Pin
LEDs of any pin(s) where a connection is found will illuminate, with the
flashing LEDs indicating pins that are crossed.
No Connection – When there is no connection found between the
connectors of the cable being tested, a single beep will sound and the OPEN
LED will illuminate. None of the LEDs at the top of the Main Tester Pin/Wire
Interface will illuminate. This means either that the cable is not plugged into
the connector on the Remote Tester, or there are no intact pin connections
from one end of the cable to the other.
Battery Status
There are two battery status LEDs on the Main Tester: and Battery Good
Battery Low Battery Low. If the LED is illuminated, replace the tester’s 9V
battery.
15-11-100-9334E3-EN.indd 3 11/20/2015 2:07:02 PM

Especificaciones del producto

Marca: Tripp Lite
Categoría: No categorizado
Modelo: T014-001

¿Necesitas ayuda?

Si necesitas ayuda con Tripp Lite T014-001 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Tripp Lite Manuales

No categorizado Manuales

Últimos No categorizado Manuales