Trust 302KS FR Manual de Usario

Trust Teclado 302KS FR

Lee a continuación 📖 el manual en español para Trust 302KS FR (8 páginas) en la categoría Teclado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/8
302KS SILVERLINE WIRELESS DESKSET
1
U K
Method when using for the first time Chapter
1. Uninstalling old drivers and devices (3.1)
2. Connecting/making a wireless connection (3.2)
3. Installing in Windows (3.3)
4. Checking after the installation (3.4)
1 Introduction
This instruction manual is for users of the TRUST 302KS SILVERLINE WIRELESS
DESKSET. The TRUST 302KS SILVERLINE WIRELESS DESKSET has 19
multimedia buttons. The set is wireless and works at a frequency of 27 MHz. It has
two channels, each with 256 different ID codes.
2 Safety
Carefully read the following instructions before use:
- The TRUST 302KS SILVERLINE WIRELESS DESKSET does not require
any special maintenance. Use a slightly damp, soft cloth to clean the set.
- Do not use aggressive substances, such as petrol or white spirit, to clean the
device. These may harm the material.
- Do not submerge the device in liquid. This may be dangerous and will
damage the device. Do not use this device near water.
- Make sure nothing is placed on the cable. Do not use this device in an area
where the cable can become worn or damaged as a result of people walking
over it.
- Do not repair this device yourself.
- This product works at a frequency of 27.0450- 27.0950MHz.
There may be local restrictions with regard to the use of this device. You are
personally responsible for ensuring that the use of this product is permitted
according to local regulations. If in doubt, contact your local authorities about
0470
- Nowadays, there are an increasing number of wireless products (video,
audio, convenience, computer, etc.) which work in the same frequency range
as this device. It may, therefore, be possible that the functionality of this
product can be limited by or be limiting for other wireless products. This can
only be avoided by paying attention to the distance between products and,
where possible, by changing channels.
- Be careful when using wireless devices if you have a pacemaker or are
dependent on other life-saving, sensitive electronic equipment. This product
transmits radio signals!
3 Installation
3.1 Uninstalling old drivers and devices
The most common cause of faults during installation is the presence of a driver for a
similar, old product. The best solution is to first remove all drivers related to old
devices before installing the new driver.
1. Enter the Windows ‘Safe Mode’ (press F8 when starting Windows and then
select ‘Safe Mode’ from the menu which is displayed).
2. Go to ‘Start – Settings – Control Panel’ and double-click on the ‘Add/Remove
Programs’ icon.
3. Find all the programs for similar, old devices and remove these by clicking on
the ‘Add/Remove’ button. When in the ‘Safe Mode’, it is possible for some
programs to appear twice. In that case, remove all the programs which
appear twice.
4. Restart the computer.
!
302KS SILVERLINE WIRELESS DESKSET
2
3.2 Connecting
1. Make sure that all products are not more than 1meter apart and that there are
no objects (or a total metal surface) in between since this will reduce the
functionality of the connection.
2. Open the cover of the battery compartment on the bottom of the mouse.
3. Set the channel selection switch (H) to the desired channel using a pointed
object. You can see which channel you select inside the compartment (CH1
or CH2) (see figure 1).
4. Insert 2 batteries into the mouse as indicated inside the battery compartment.
5. Close the mouse battery compartment.
6. Open the keyboard battery compartment.
7. Insert 3 batteries into the battery compartment as indicated inside the battery
compartment.
8. Close the keyboard battery compartment.
9. Open the keyboard’s right-hand bottom stand (see figure 2).
10. Set the channel selection switch (H) to the desired channel using a pointed
object (see figure 2). You can see which channel you select next to the
channel selection switch (CH1 or CH2).
11. Make sure the computer is turned off.
12. Connect the green plug of the set’s receiver to the PS/2 mouse connection
on your computer.
13. Connect the receiver’s purple plug to the PS/2 keyboard connection on your
computer.
14. Turn the computer on.
15. The receiver will be automatically detected and installed as a standard PS/2
mouse and keyboard.
Note: The keyboard and mouse will not work after they have been connected.
A wireless connection must first be made between the keyboard, the
mouse and the receiver before the set can be used. Continue from
chapter 3.3.
Note: Do not recharge the batteries. These are NOT rechargeable.
Note: Inserting the batteries incorrectly may damage the device.
3.3 Making a wireless connection
1. Make sure your computer is turned on.
2. Make sure that all products are not more than 1meter apart and that there are
no objects (or a total metal surface) in between since this will reduce the
functionality of the connection.
3. Make sure that the batteries are placed and are full enough.
4. The receiver has two different coloured indicators. The red indicator is for the
keyboard and the green indicator is for the mouse. These two indicators are
located in a single lamp (J) on top of the receiver (see figure 1).
5. Press the ID button (I) on top of the receiver (see figure 1). The indicators will
flash simultaneously.
6. Open the keyboard’s right-hand bottom stand. Use a pointed object to press
the round ID button (V) (see figure 2). The red indicator on the receiver will
stop flashing to indicate that the keyboard has made a connection with the
receiver.
7. Press the round ID button on the bottom of the mouse (see figure 1). The
green indicator will also stop flashing. The indicator will remain constantly lit
as an orange colour (combination of red and green).
8. The keyboard and mouse have now made a connection with the receiver.
302KS SILVERLINE WIRELESS DESKSET
3
U K
The keyboard and mouse andard keyboard and mouse.will now work as a st
Continue with the installation of the software if you wish to use the extra
functions.
Note: When one of the indicators does not light up, this indicates that the
mouse or keyboard is not connected or has not been connected
correctly.
3.4 Installation in Windows 98 / ME / 2000 / XP
Note: The latest driver can be downloaded from www.trust.com/13165. Check
whether a new driver is available and use this for the installation.
Note: Make sure all other programs are closed during the installation.
Note: During installation in Windows XP, you may receive a message saying
that the driver has not been signed. This does not cause a problem for
the functionality. Click ok to continue.
Note: In the example, ‘D:\’ is used to indicate the CD-ROM drive. This may be
different for your computer.
1. Insert the CD-ROM into your computer’s CD-ROM drive. The installation
program will start automatically. If it does not start automatically, carry out
the following:
a) Select 'Run' from the Start menu.
b) Type [D:\SETUP.EXE] and click on 'OK' to start the Trust Software
Installer.
2. Figure 3 will appear.
3. Click on the language you wish to use for the installation.
4. Click on ‘302KS Keyboard‘ to start the installation of the keyboard.
5. Follow the on-screen instructions.
6. Click on ‘302KS Mouse‘ to start the installation of the mouse.
7. Follow the on-screen instructions.
The installation of the software for the mouse and the keyboard has now been
completed.
4 Checking after the installation
After installing the device and the driver, the following are installed on your computer
and can be checked:
Taskbar
– The icons as shown in figure 4 should be visible in the right-hand corner of your
taskbar.
‘Start – Settings – Control Panel’. Double-click on the ‘System’ icon and select the
‘Device Manager’ tab.
- Keyboard – Standard 101/102 Key or Microsoft Natural Keyboard
- Mouse – WHEEL MOUSE PS/2
‘Start – Settings – Control Panel’ and then double-click on the ‘Add/Remove
Programs’ icon.
- Trust keyboard utility
- Uninstall Trust keyboard utility
Start - Programs - Trust - 302KS SILVERLINE WIRELESS DESKSET
- Trust mouse utility
- Uninstall Trust mouse utility
Note: The information given in this chapter will vary when the installation has
been altered by the user (for example, not everything has been installed
or locations other than the default locations have been selected).

Especificaciones del producto

Marca: Trust
Categoría: Teclado
Modelo: 302KS FR

¿Necesitas ayuda?

Si necesitas ayuda con Trust 302KS FR haz una pregunta a continuación y otros usuarios te responderán


Teclado Trust Manuales

Trust

Trust 14960 Manual de Usario

19 Octubre 2024
Trust

Trust Thura GXT 860 Manual de Usario

4 Octubre 2024
Trust

Trust Tocamy Manual de Usario

3 Octubre 2024
Trust

Trust 24645 Manual de Usario

1 Octubre 2024
Trust

Trust Scarr GXT 877 Manual de Usario

26 Septiembre 2024
Trust

Trust Classics KB-1300 Manual de Usario

22 Septiembre 2024
Trust

Trust Wireless Deskset Manual de Usario

20 Septiembre 2024
Trust

Trust Primo 23971 Manual de Usario

18 Septiembre 2024
Trust

Trust DS-4400D Manual de Usario

18 Septiembre 2024
Trust

Trust Evo Manual de Usario

17 Septiembre 2024

Teclado Manuales

Últimos Teclado Manuales

Digitech

Digitech iPB-10 Manual de Usario

27 Octubre 2024
Kawai

Kawai ESX Manual de Usario

27 Octubre 2024
Patriot

Patriot Viper V765 Manual de Usario

26 Octubre 2024
Casio

Casio MZ-X500 Manual de Usario

23 Octubre 2024
Casio

Casio WK-1630 Manual de Usario

23 Octubre 2024
Casio

Casio ToneBank CT-636 Manual de Usario

23 Octubre 2024
Casio

Casio Privia PX-830 Manual de Usario

23 Octubre 2024
Casio

Casio 100 ToneBank SA-1 Manual de Usario

23 Octubre 2024
Casio

Casio CTK-3400SK Manual de Usario

23 Octubre 2024
Yamaha

Yamaha PSR-E413 Manual de Usario

23 Octubre 2024