Uniden D1483 Manual de Usario

Lee a continuación 📖 el manual en español para Uniden D1483 (18 páginas) en la categoría telefono. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/18
© 2013 Uniden America Corp. Printed in Vietnam
Ft. Worth, Texas U01UN565BZZ(0)
What's in the box?
Not pictured for base:
Rechargeable battery (BT-1021)
Battery cover
AC adapter (PS-0035)
Telephone cord
Base with answering system
and cordless handset
If any items are missing or damaged, contact our Customer Care Line
immediately. Never use damaged products!
Call waiting, CID, CIDCW, and Voice Mail are telephone line services.
Contact your provider for details.
Need help? Get answers 24/7 at our website: www.uniden.com .
If You... Contact Uniden’s... Phone Number
have a question or problem Customer Care Line* 817-858-2929 or
800-297-1023
need a part or an accessory Parts Department* 800-554-3988
need special assistance due to
a disability Accessibility Help Line 800-874-9314
(voice or TTY)
* During regular business hours, Central Standard Time; see our website for detailed
business hours.
D1481/1483 User's Guide
2 - English
Important Safety Instrucons
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to
persons, including the following:
This unit is NOT waterproof. DO NOT expose it to rain/moisture.
Do not use this product near water, for example, near a bath tub, wash bowl,
kitchen sink or laundry tub, in a wet basement or near a swimming pool.
Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak.
Use only the power cord and batteries indicated in this manual. Do not
dispose of batteries in a fire. They may explode. Check with local codes for
possible special disposal instructions.
Do not place the handset in the base charging cradle without the battery
installed and the battery cover securely in place.
SAVE THESE INSTRUCTIONS
CAUTION! Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions. Do not open or
mutilate the battery. Disconnect the battery before shipping this product.
Geng Started ....................................... 3
Installing Your Phone ...............................3
Geng to Know Your Phone ...................4
Using the Menu .......................................6
Using Your Phone ................................... 7
Basics .......................................................7
Finding the Handset .................................8
Using the Phonebook, Caller ID, and
Redial Lists ............................................8
Mul-Handset Features ........................... 9
Using a Voice Mail Service ....................... 9
Using the Answering System .................. 9
Answering System Opons
(
Answering Setup
) ...........................9
Personalizing the Greeng .....................10
Accessing the Answering System ...........11
Geng Your Message ............................11
Using the System While You’re Away
from Home .........................................12
Important Informaon ......................... 12
Troubleshoong .....................................13
Adapter and Baery Informaon ..........14
Compliance Informaon ........................15
Warranty (1 Year, Limited) ....................17
What’s in the manual?
English - 3
GETTING STARTED
Installing Your Phone
Charge the Baery
1. Unpack the handset, battery pack, and battery
cover. If you need to remove the cover, press in on
the notch and slide the cover down and off.
2. Line up the battery connector with the jack inside
the handset; the connector only fits one way.
3. Push the connector in until it clicks into place; tug gently on the wires to
make sure the battery is securely connected.
4. Replace the battery cover and slide it into place.
5. Use an AC adapter to connect the power jack on the base to a regular
indoor (120V AC) power outlet.
6. Place the handset in the base with the display facing forward. If the display
doesn’t light up, reseat the handset or connect the base to a different outlet.
#Charge the handset completely (about 15 hours) before using.
Connect the Telephone Cord
1. Use the telephone cord to connect the
TEL LINE
jack on the base to a
standard telephone wall jack.
#If the display says check the connection between the Check Tel Line,
base and the phone jack.
2. If you are mounting the phone on the wall, place the mounting slots (on
the rear of the base) over the pins on the wall plate; slide the base down to
lock it into place.
Test the Connecon
Make a quick test call. Pick up the handset and press
TaLk/fLash
. (Press
ENd
to hang up.)
If there’s a lot of noise, check for interference (see p. 13).
If you keep hearing a dial tone, change to pulse dialing (see below).
Changing from Tone to Pulse Dialing
Your phone uses tone dialing by default. If your phone company uses pulse
dialing, you need to change your phone’s dial mode.
1. Press
MENu/sELEcT
and select .Global Setup
2. Select then . You’ll hear a confirmation tone.Dial Mode Pulse
To send DTMF tones during a call (e.g., for an automated response system),
press
*
to temporarily switch to tone dialing. When you hang up, the phone
automatically returns to pulse dialing.

Especificaciones del producto

Marca: Uniden
Categoría: telefono
Modelo: D1483

¿Necesitas ayuda?

Si necesitas ayuda con Uniden D1483 haz una pregunta a continuación y otros usuarios te responderán




telefono Uniden Manuales

telefono Manuales

Últimos telefono Manuales