V-Tac VT-2441 Manual de Usario

Lee a continuación 📖 el manual en español para V-Tac VT-2441 (1 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
REMOTE CONTROLLER
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serv se instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any
another query, please contact our dealer or local vendor from whom you have purchased the product. They are
trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The
warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company
gives no warranty against damage to any surface due to incorrect removal and installation of the product. The
products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the
warranty. This product is warranted for manufacturing defects only.
WARNING!
1. For Indoor use only
2. In the using of the remote, if the indicated lamp blinking quickly, pls change the battery in time. Pls dont
use poor quality battery to avoid the leaking of battery liquid to damage the remote.
3. Pls don’t use the remote on the wide-range metal or strong electromagnetic wave area, otherwise, it will
badly affect the controlling distance.
Caution, risk of electric shock.
PRODUCT KEY DIAGRAM
This marking indicates that this
product should not be disposed
of with other household wastes.
2
YEARS
WARRANTY
*
INSTRUCTION
LINKING AND UNLINKING
1. Long press “Master OFF” or “Zone OFF”
to night light mode.
2. Touch “Color temperature line” to white
light mode and adjust color temperature.
3. Touch “Color Ring” to change the
colors.
4. Press “Speed+” to accelerate the
dynamic mode speed continously until to
fastest speed.
5. Press “Speed-” to lower the dynamic
mode speed continously until to lowest
speed.
UNLINKING INSTRUCTIONS
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
TECHNICAL DATA:
MODEL VT-2441
INPUT VOLTAGE 3V (AAAx 2PCS)
(BATTERY NOT INCLUDED)
TRANSMISSION
FREQUENCY 2.4GHz
TRANSMISSION
POWER 6dBm
STANDBY POWER
CONSUMPTION 20μA
DIMENSION 56x20x138mm
Master ON
Color Ring
Speed+
Speed-
Saturation Control
Master OFF
Indicator
Color Temperature Line
Brightness Dimming
Mode
Zone ON
(Link/Unlink)
Zone OFF
When the light on, short
press any zone of " "
3 times within 3 seconds
LINKING INSTRUCTIONS
If the light not blink slowly, the linking failed, Please switch off the light again, and follow the above
steps again.
Switch off the light,
after 10 seconds
switch on again
123The light blink 3 times
slowly means the linking
is done successfully.
Link/Unlink
button
B
+
G
R
Power
Supply
controller
B
+
G
R
Power
Supply
controller
When the light on, short press
" " 5 times within 3 seconds
Unlinking must be the same zone
with the Linking
If the light not blink quickly, the unlink failed, please switch off the light again, and follow the
above steps to unlink again.
Switch off the light,
after 10 seconds switch
on again
1 2 3 The light blinking 10 times
quickly, means the unlinking
successfully.
Link/Unlink
button
B
+
G
R
Power
Supply
controller
B
+
G
R
Power
Supply
controller
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
COMPATIBLE DEVICES
Compatible with the below devices (Not included; available to buy separately)
(SKU: 2912
VT-2432)
(NOT INCLUDED)
(SKU: 2913
VT-2434)
(NOT INCLUDED)
VT-2432 VT-2434

Especificaciones del producto

Marca: V-Tac
Categoría: No categorizado
Modelo: VT-2441

¿Necesitas ayuda?

Si necesitas ayuda con V-Tac VT-2441 haz una pregunta a continuación y otros usuarios te responderán




No categorizado V-Tac Manuales

No categorizado Manuales

Últimos No categorizado Manuales