V-Tac VT-7007 Manual de Usario

V-Tac Lámpara VT-7007

Lee a continuación 📖 el manual en español para V-Tac VT-7007 (2 páginas) en la categoría Lámpara. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
INSTRUCTION MANUAL
LED SPOT LIGHT
TECHNICAL DATA
MODEL VT-7007
SKU 23182, 23183, 23184
USEFUL LUMENS 660 LM @Sphere 36
INPUT VOLTAGE AC: 220-240V, 50hz
POWER 7W
BEAM ANGLE 60°
LIFE SPAN 20,000 Hours
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code to
access the manual in multiple languages.
INTRODUCTION & WARRANTY
WARNING
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty
does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the product. The products
are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This
product is warranted for manufacturing defects only.
1. Please make sure to turn o the power before starting the installation.
2. Installation must be performed by a qualified electrician.
3. The light source of this luminaire is not replaceable, when the light source reaches its
end of life the whole luminaire should be replaced.
4. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively
replaced by the manufacturer or his service agent or a similar qualified person in order
to avoid a hazard.
5. For Indoor use only
ON/OFF CYCLE >15,000 Times
PROTECTION RATING IP20
INPUT VOLTAGE AC: 100-265V, 50/60Hz
UNIT COLOUR White
MATERIAL PC
DIMENSION Ø86x20 mm
CUT OUT SIZE Ø65 mm
This marking indicates that this product
should not be disposed of with other
household wastes.
Caution, risk of electric shock.
BROWN BLUE
INSTALLATION INSTRUCTION
1. Switch o the power before starting the installation.
2. Mark the area for making hole).
3. Cut a hole as per the Cut Out Size - Ø65 mm(Figure 2).
4. Connect the AC connection to the driver (Figure 3).
5. Hold the two clips back against the sides of the spot light and push up into the hole.
The clips then lie flat on top of the ceiling holding it in place (Figure 3).
6. Turn on the power and test.
1
3 3
2
Ø65 mm
Ø86 mm
Ø20 mm

Especificaciones del producto

Marca: V-Tac
Categoría: Lámpara
Modelo: VT-7007

¿Necesitas ayuda?

Si necesitas ayuda con V-Tac VT-7007 haz una pregunta a continuación y otros usuarios te responderán




Lámpara V-Tac Manuales

Lámpara Manuales

Últimos Lámpara Manuales