Viking PHK528SS Manual de Usario

Viking Refrigerador PHK528SS

Lee a continuación 📖 el manual en español para Viking PHK528SS (4 páginas) en la categoría Refrigerador. Esta guía fue útil para 12 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
®
Installation
GUIDE
5 SERIES
Professional Handle Kit
For Use with All Refrigerators/All Freezer
PHK528SS
IMPORTANT - Please Read and Follow!
• Before beginning, please read these instructions completely and carefully.
• Use caution during assembly to minimize scratches.
• Do not remove permanently a xed labels, warnings or plates from the product. This may void the warranty.
• Please refer to the Installation Instructions for more information on installing the refrigerator/freezer door panel.
The installer should leave instructions with the customer who should retain for local inspector’s use and future reference.
Installation with Wooden Full Overlay Custom Door Front
Parts Included Required Tools
Electric Drill
5/16 (.8 cm) Drill Bit
5/8 (1.6 cm) Spade or Forstner Bit (Counterbore)
Tape Measure
Phillips Head Screwdriver
Masking Tape and Pencil
Rubber Mallet
To Install:
1. Locate the wooden custom panel.
2. Using the illustrations on the next page, layout the handle location on the panels. It is recommended that masking tape be
placed where the four holes will be drilled to help mark the hole placement and to prevent any damage to the door when drill-
ing the holes.
3. The Professional handle will be mounted using (4) of the 1/4” x 1 Phillips head screws provided. Using the 5/16”(.8 cm) drill bit,
drill completely through the door in the hole locations. Using the 5/8 (1.6 cm) bit, counter-bore two holes 1/4” (.6 cm) deep on
the BACKSIDE of the custom door panel.
4. Place a handle end cap on both ends of the handle tube. Tap the endcaps rmly into place with a rubber mallet ensuring that
both endcaps mounting surfaces are parallel.
5. Align the holes in the endcaps with the holes on the panel and attach the Professional handle to the panel using the (4) 1/4”
(.6cm) screws provided.
Part Quantity
Professional Handle tube (1)
Professional End Caps (2)
1/4 x 1” (0.6 cm x 2.5 cm)
Phillips Head Screws
(4)
063929-000 Install Guide (1)
Handle Installation
17-15/16”
(45.6 cm)
27-1/16”
(68.7 cm)
1-1/8” (2.85 cm)
1-9/16” (4.0 cm)
A A
5/16 (.8 cm)
through-holes
with 5/8 x 1/4”
counterbore
*See section A-A.
5/8” (1.6 cm) Ø x 1/4” (.6 cm) counterbore
1-1/8” (2.85 cm)
5/16 (.8 cm) Ø through-holes
3/4” (1.8 cm)
Full Overlay Panel
Custom Door
All Refrigerator / All Freezer
(Front View)

Especificaciones del producto

Marca: Viking
Categoría: Refrigerador
Modelo: PHK528SS

¿Necesitas ayuda?

Si necesitas ayuda con Viking PHK528SS haz una pregunta a continuación y otros usuarios te responderán




Refrigerador Viking Manuales

Refrigerador Manuales

Últimos Refrigerador Manuales