VTech CS5119 Manual de Usario

VTech telefono CS5119

Lee a continuación 📖 el manual en español para VTech CS5119 (4 páginas) en la categoría telefono. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/4
What’s in the box
Your telephone package contains the following
items. Save your sales receipt and original
packaging in the event warranty service is
necessary.
Mount the telephone base
Abridged user’s manual
Telephones identified with this
logo have reduced noise and
interference when used with most
T-coil equipped hearing aids and
cochlear implants. The TIA-1083
Compliant Logo is a trademark of
the Telecommunications Industry
Association. Used under license.
T
Compatible with
Hearing d T-CoilAi
TIA-1083
Congratulations
on purchasing your new VTech product. Before
using this telephone, please read Important
safety instructions.
This abridged user’s manual provides you with
basic installation and use instructions. A limited
set of features are described in abbreviated form.
Please refer to the online user’s manual for a full
set of installation and operation instructions at
www.vtechphones.com.
BC
CS5119
CS5119-13
CS5119-15
CS5119-16
CS5119-17
CS5119-18
CS5119-2
CS5119-23
DECT 6.0 cordless telephone
Go to www.vtechphones.com
to register your product for
enhanced warranty support and
the latest VTech product news.
Abridged
user’s
manual
Important
safety
instructions
The ENERGY STAR® program
(www.energystar.gov)
recognizes and encourages
the use of products that save
energy and help protect our
environment. We are proud
to mark this product with
the ENERGY STAR®
label
indicating it meets the latest
energy efficiency guidelines. 1 set for
CS5119/
CS5119-13/
CS5119-15/
CS5119-16/
CS5119-17/
CS5119-18
2 sets for
CS5119-2/
CS5119-23
1 set for CS5119-2/CS5119-23
Telephone base overview
1 –
• Page all system handsets.
2 – light
• Flashes when there is an incoming call, or
another telephone sharing the same line is in use.
• On when the telephone is in use.
3 – Charging pole
Handset overview
1 – Handset earpiece
2 – LCD display
3 –
• Show the menu.
• While in a menu, press to select an item, or save
an entry or setting.
4 –
• Hang up a call.
• Return to the previous menu or idle mode without
making changes.
• Delete digits while predialing.
• Silence the handset ringer temporarily while the
phone is ringing.
• Erase the missed call indicator while the handset
is not in use.
5 –
• Turn on or off the quiet mode.
• Show other dialing options when reviewing a
caller ID log entry.
6 –
• Press to start an intercom conversation or transfer
a call (for multi-handset models only).
7 – Microphone
8 –
• Mute the microphone during a call.
• Silence the handset ringer temporarily while the
phone is ringing.
• Delete the displayed entry while reviewing the
phonebook, caller ID log, call block list or redial
list.
• Delete digits or characters when entering
numbers or names.
9 –
• Make or answer a call using the handset
speakerphone.
• During a call, press to switch between the
speakerphone and the handset earpiece.
10 –
• Switch to tone dialing temporarily during a call.
11 –
• Press to add a space when entering names.
12 –
• Press repeatedly to add or remove 1 in front of
the caller ID log entry before dialing or saving it
to the phonebook.
• Press and hold to set or dial your voicemail
number.
13 –
• Make or answer a call.
• Answer an incoming call when you receive a call
waiting alert.
14 –
• Review the redial list.
• Insert a dialing pause while dialing or entering
numbers into the phonebook.
15 –
• Review the phonebook when the phone is not
in use.
• Scroll up while in a menu, or in the phonebook,
caller ID log or redial list.
• Move the cursor to the right when entering
numbers or names.
• Increase the listening volume during a call.
• Review the caller ID log when the telephone is
not in use.
• Scroll down while in a menu, or in the
phonebook, caller ID log or redial list.
• Move the cursor to the left when entering
numbers or names.
• Decrease the listening volume during a call.
16 – light
• On when the handset is charging.
Charger overview
1 – Charging pole
Display icons overview
The battery icon flashes when the
battery is low and needs charging.
The battery icon animates when the
battery is charging.
The battery icon becomes solid when
the battery is fully charged.
The handset ringer is turned off.
There are new voicemail received
from your telephone service provider.
NEW There are new caller ID log entries.
ECO The ECO mode activates
automatically to reduce power
consumption when the handset is
within range from the telephone
base.
Connect
You can choose to connect the telephone base
for desktop usage or wall mounting.
NOTES
• Use only the adapters provided.
• Make sure the electrical outlets are not controlled
by wall switches.
• The adapters are intended to be correctly oriented
in a vertical or floor mount position. The prongs are
not designed to hold the plug in place if it is plugged
into a ceiling, under-the-table or cabinet outlet.
TIP
• If you subscribe to digital subscriber line (DSL)
high-speed Internet service through your telephone
line, make sure you install a (not DSLlter
included) between the telephone line cord and
telephone wall jack. Contact your DSL service
provider for more information.
Connect the telephone base
Connect the charger
Install the battery
Install the battery as shown below.
NOTES
• Use only supplied battery.
• Charge the battery provided with this product only
in accordance with the instructions and limitations
specified in this manual.
• If the handset will not be used for a long time,
disconnect and remove the battery to prevent
possible leakage.
Check the battery level
After you have installed the battery, check the
battery level on the handset screen.
• If the battery icon is , or , then go to
Before use section to set the date and time.
• If the screen is blank, or flashes, then the
battery needs to be charged. Go to Charge
the battery section before you do any setting
or operation.
Charge the battery
Place the handset in the telephone base or the
charger to charge.
Once you have installed the battery, the handset
LCD display indicates the battery status (see the
table below).
NOTES
• or place the handset in the charger Press CANCEL
will bypass the set date and time, and voice guide.
• For best performance, keep the handset in the
telephone base or charger when not in use.
• The battery is fully charged after 12 hours of
continuous charging.
• If you place the handset in the telephone base or
the charger without plugging in the battery, the
screen displays No battery.
Battery
indicators Battery status Action
The screen
is blank, or
displays Put in
charger and
flashes.
The battery has
no or very little
charge. The
handset cannot
be used.
Charge without
interruption
(at least 30
minutes).
The screen
displays
Low battery
and flashes.
The battery has
enough charge
to be used for a
short time.
Charge without
interruption
(about 30
minutes).
The screen
displays
HANDSET X.
The battery is
charged.
To keep
the battery
charged,
place it in the
telephone base
or charger
when not in
use.
To manually set the date and time, refer to
Congure your telephone section.
Before use
After you install your telephone or power returns
following a power outage and battery depletion,
the handset will prompt you to set the date and
time.
Set date and time
1. Use the dialing keys ( ) to enter the month 0-9
( ), date ( ) and year ( ). Then press MM DD YY
SELECT.
2. Use the dialing keys (0-9) to enter the hour
( ) and minute ( ). Then press HH MM
or
to
choose AM or .PM
3. Press SELECT to save.
Check for dial tone
Press . If you hear a dial tone, the installation
is successful.
If you do not hear a dial tone:
• Make sure the installation procedures
described above are properly done.
• It may be a wiring problem. If you have
changed your telephone service to digital
service from a cable company or a VoIP
service provider, the telephone line may need
to be rewired to allow all existing telephone
jacks to work. Contact your cable/VoIP service
provider for more information.
Operating range
This cordless telephone operates with the
maximum power allowed by the Federal
Communications Commission (FCC). Even
so, this handset and telephone base can
communicate over only a certain distance
- which can vary with the locations of the
telephone base and handset, the weather, and
the layout of your home or office.
When the handset is out of range, the handset
displays Out of range or no pwr at base.
If there is a call while the handset is out of range,
it may not ring, or if it does ring, the call may not
connect well when you press . Move closer to
the telephone base, then press to answer the
call. If the handset moves out of range during a
telephone conversation, there may be
interference. To improve reception, move closer
to the telephone base.
Use the handset menu
1. Press MENU when the phone is not in use.
2. until the screen displays the Press or
desired feature menu.
3. Press SELECT.
• To return to the previous menu, press
CANCEL.
• To return to idle mode, press and hold
CANCEL.
Congure your telephone
Set language
The LCD language is preset to English. You can
select English, French or Spanish to be used in
all screen displays.
1. Press MENU when the handset is not in use.
2. Scroll to , then press Settings SELECT twice.
3. Scroll to choose , English Français or
Español.
4. Press SELECT to save your setting.
Set date and time
1. Press MENU on the handset when not in use.
2. Scroll to Set date/time and then press
SELECT.
3. Use the dialing keys ( ) to enter the month 0-9
( ), date ( ) and year ( ). Then press MM DD YY
SELECT.
4. Use the dialing keys ( ) to enter the hour 0-9
( ) and minute ( ). Then press HH MM
or
to
choose AM or .PM
5. Press SELECT.
Temporary tone dialing
If you have pulse (rotary) service only, you
can switch from pulse to touch-tone dialing
temporarily during a call.
1. During a call, press .TONE
2. Use the dialing keys to enter the relevant
number. The telephone sends touch-tone
signals. It automatically returns to pulse
dialing mode after you end the call.
Telephone operations Make a call
• or , and then dial the telephone Press
number.
Answer a call
• , or any of the dialing keys.Press
End a call
• or put the handset back in the Press OFF
telephone base or charger.
Speakerphone
• During a call, press on the handset to
switch between speakerphone and handset
earpiece.
Volume
• During a call, press to adjust /VOLUME/
the listening volume.
Mute
The mute function allows you to hear the other
party but the other party cannot hear you.
1. During a call, press . The handset MUTE
displays Muted.
2. again to resume the Press MUTE
conversation. The handset displays
Microphone on briefly.
Join a call in progress (for multiple
handset models only)
You can use up to four handsets at a time on an
outside call.
• When a handset is already on a call, press
or on another handset to join the call.
• To exit the call, press on the handset or OFF
place it in the telephone base or charger. The
call continues until all handsets hang up.
Call waiting
When you subscribe to call waiting service from
your telephone service provider, you hear an
alert tone if there is an incoming call while you
are already on a call.
• to put the current call on hold Press FLASH
and take the new call.
• at any time to switch back and Press FLASH
forth between calls.
Find handset
Use this feature to find the system handset.
To start paging:
• Press FIND HANDSET on the telephone
base when not in use. All idle handsets ring
and display .** Paging **
To end paging:
• Press FIND HANDSET at the telephone
base.
-OR-
• , , or any of the dialing keys Press OFF
on the handset.
-OR-
• Place the handset in the telephone base or
charger.
NOTE
• Do not press and hold FIND HANDSET for
more than four seconds. It may lead to handset
deregistration.
Redial list
Each handset stores the last 10 telephone
numbers dialed. When there are already 10
entries, the oldest entry is deleted to make room
for the new entry.
Review and dial a redial list entry
1. Press REDIAL when the handset is not in
use.
2. Press , or repeatedly until the REDIAL
desired entry displays.
3. Press to dial.
Delete a redial list entry
• When the desired redial entry displays, press
DELETE.
Intercom
Use the intercom features for conversations
between two handsets.
1. Press INT on your handset when not in use.
Use the dialing keys to enter a destination
handset number if necessary.
2. To answer the intercom call, press , ,
INT or any dialing key on the destination
handset.
3. To end the intercom call, press or place OFF
the handset back in the telephone base or
charger.
Answer an incoming call during an
intercom call
If you receive an incoming call during an
intercom call, there is an alert tone.
• To answer the outside call, press . The
intercom call ends automatically.
• To end the intercom call without answering
the outside call, press OFF. The telephone
continues to ring.
h
i
j
n
p
o
k
l
m
a
b
c
d
e
f
g
a
THIS SIDE UP
Handset control key panel:
4
A
a
c
b
Ringer tone
You can choose from different ringer tones for
each handset.
1. Press MENU when the handset is not in use.
2. Scroll to and then press Ringers SELECT.
3. Scroll to choose , then press Ringer tone
SELECT.
4. Press or to sample each ringer tone,
then press SELECT to save.
NOTE
• If you turn off the ringer volume, you will not hear
ringer tone samples.
Ringer volume
You can adjust the handset ringer volume level,
or turn the ringer off.
1. Press MENU when the handset is not in use.
2. Scroll to and then press Ringers SELECT
twice.
3. to sample each volume level, Press or
then press SELECT to save.
NOTE
• When the ringer volume is set to Off, the handset
still rings when you press FIND HANDSET at the
telephone base.
Temporary ringer silencing
When the telephone is ringing, you can
temporarily silence the ringer without
disconnecting the call. The next call rings
normally at the preset volume.
To silence the handset ringer:
• or . The handset Press CANCEL MUTE
displays Ringer muted and .
Quiet mode
You can turn on the quiet mode for a period of
time. During this period, all tones (except paging
tone) are muted.
1. Press and hold on the handset when
idle.
2. Use the dialing keys to enter the duration, and
then press SELECT to save.
• To turn off the quiet mode, press and hold
on the handset when idle.
Retrieve voicemail from telephone
service
Voicemail is a feature available from most
telephone service providers. It may be included
with your telephone service, or may be optional.
Fees may apply.
Retrieve voicemail
When you received a voicemail, the handset
displays and . To retrieve, New voicemail
you typically dial an access number provided by
your telephone service provider, and then enter
a security code. Contact your telephone service
provider for instructions on how to configure the
voicemail settings and listen to messages.
NOTE
• After you have listened to all new voicemail
messages, the indicators on the handset turn off
automatically.
Set your voicemail number
You can save your access number on each
handset for easy access to your voicemail.
After you saved the voicemail number, you can
press and hold to retrieve voicemail.
1. Press MENU when the phone is not in use.
2. Scroll to and then press Settings SELECT.
3. Scroll to and then press Voicemail #
SELECT.
4. Use the dialing keys to enter the voicemail
number (up to 30 digits).
5. Press SELECT to save.
Turn off the new voicemail indicators
If you have retrieved your voicemail while away
from home, and the handset still displays the
new voicemail indicators, use this feature to turn
off the indicators.
NOTE
• This feature turns off the indicators only, it does not
delete your voicemail messages.
1. Press MENU when the phone is not in use.
2. Scroll to and then press Settings SELECT.
3. Scroll to and then press Clr voicemail
SELECT.
Expand your telephone system
You can add new handsets (CS5109), cordless
headsets (IS6200) or speakerphones ( MA3222
or AT&T ) to your telephone system. All TL80133
accessories are sold separately. Your telephone
base supports a maximum of five devices.
For more details, refer to the user’s manual that
comes with your new device.
ECO mode
This power conserving technology reduces
power consumption for optimal battery
performance. The ECO mode activates
automatically whenever the handset is
synchronized with the telephone base.
General product care
Taking care of your telephone
Your cordless telephone contains sophisticated
electronic parts, so it must be treated with care.
Avoid rough treatment
Place the handset down gently. Save the original
packing materials to protect your telephone if you
ever need to ship it.
Avoid water
Your telephone can be damaged if it gets wet.
Do not use the handset outdoors in the rain,
or handle it with wet hands. Do not install the
telephone base near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power
surges harmful to electronic equipment. For your
own safety, take caution when using electrical
appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing that
should retain its luster for many years. Clean it
only with a dry non-abrasive cloth. Do not use
dampened cloth or cleaning solvents of any kind.
Frequently asked questions
Below are the questions most frequently asked
about the cordless telephone. If you cannot find
the answer to your question, visit our website at
www.vtechphones.com or call
1 (800) 595-9511 for customer service. In
Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
My telephone
does not work
at all.
Make sure the telephone
base is installed properly,
and battery is installed
and charged correctly.
For optimum daily
performance, return the
handset to the telephone
base after use.
The display
shows . No line
I cannot hear the
dial tone.
Disconnect the telephone
line cord from your
telephone and connect it to
another telephone. If there
is no dial tone on that other
telephone either, then the
telephone line cord may be
defective. Try installing a
new telephone line cord.
If changing the telephone
line cord does not help,
the wall jack (or the wiring
to this wall jack) may be
defective. Contact your
telephone service provider.
You may be using a new
cable or VoIP service, the
existing telephone jacks in
your home may no longer
work. Contact your service
provider for solutions.
The display
shows To
register HS...
and ...see
manual
alternately. The
handset does
not work at all.
The handset is
deregistered from the
telephone base.
Place the handset in the
telephone base to register
it.
You hear a beep when
the registration process
completes. This process
takes about 60 seconds.
I accidentally
set my LCD
language to
Spanish or
French, and I
don’t know how
to change it back
to English.
While the handset is not in
use, press and then MENU
enter to change the 364#
handset LCD language
back to English.
Limited warranty
What does this limited warranty cover?
The manufacturer of this VTech Product warrants
to the holder of a valid proof of purchase
(“Consumer” or “you”) that the Product and
all accessories provided in the sales package
(“Product”) are free from defects in material
and workmanship, pursuant to the following
terms and conditions, when installed and used
normally and in accordance with the Product
operating instructions. This limited warranty
extends only to the Consumer for Products
purchased and used in the United States of
America and Canada.
What will VTech do if the Product is not free
from defects in materials and workmanship
during the limited warranty period (“Materially
Defective Product”)?
During the limited warranty period, VTech’s
authorized service representative will repair
or replace at VTech’s option, without charge,
a Materially Defective Product. If we repair
the Product, we may use new or refurbished
replacement parts. If we choose to replace
the Product, we may replace it with a new or
refurbished Product of the same or similar
design. We will retain defective parts, modules,
or equipment. Repair or replacement of the
Product, at VTech’s option, is your exclusive
remedy. VTech will return the repaired or
replacement Products to you in working
condition. You should expect the repair or
replacement to take approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the Product
extends for ONE (1) YEAR from the date
of purchase. If VTech repairs or replaces a
Materially Defective Product under the terms of
this limited warranty, this limited warranty also
applies to the repaired or replacement Product
for a period of either (a) 90 days from the date
the repaired or replacement Product is shipped
to you or (b) the time remaining on the original
one-year warranty; whichever is longer.
What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse,
accident, shipping or other physical damage,
improper installation, abnormal operation or
handling, neglect, inundation, fire, water or
other liquid intrusion;
2. Product that has been damaged due to repair,
alteration or modification by anyone other than
an authorized service representative of VTech;
3. Product to the extent that the problem
experienced is caused by signal conditions,
network reliability, or cable or antenna systems;
4. Product to the extent that the problem is
caused by use with non-VTech accessories;
5. Product whose warranty/quality stickers,
product serial number plates or electronic
serial numbers have been removed, altered or
rendered illegible;
6. Product purchased, used, serviced, or shipped
for repair from outside the United States of
America or Canada, or used for commercial or
institutional purposes (including but not limited
to Products used for rental purposes);
7. Product returned without a valid proof of
purchase (see item 2 below); or
8. Charges for installation or set up, adjustment of
customer controls, and installation or repair of
systems outside the unit.
How do you get warranty service?
To obtain warranty service in the USA, please
visit www.vtechphones.com or call our website at
1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or call 1 (800) 267-7377.
NOTE: Before calling for service, please review
the user’s manual - a check of the Product’s
controls and features may save you a service call.
Except as provided by applicable law, you assume
the risk of loss or damage during transit and
transportation and are responsible for delivery
or handling charges incurred in the transport of
the Product(s) to the service location. VTech
will return repaired or replaced Product under
this limited warranty. Transportation, delivery or
handling charges are prepaid. VTech assumes no
risk for damage or loss of the Product in transit.
If the Product failure is not covered by this limited
warranty, or proof of purchase does not meet the
terms of this limited warranty, VTech will notify you
and will request that you authorize the cost of repair
prior to any further repair activity. You must pay
for the cost of repair and return shipping costs for
the repair of Products that are not covered by this
limited warranty.
What must you return with the Product to get
warranty service?
1. Return the entire original package and
contents including the Product to the VTech
service location along with a description of the
malfunction or difficulty; and
2. Include a “valid proof of purchase” (sales
receipt) identifying the Product purchased
(Product model) and the date of purchase or
receipt; and
3. Provide your name, complete and correct
mailing address, and telephone number.
Other limitations
This warranty is the complete and exclusive
agreement between you and VTech. It supersedes
all other written or oral communications related to
this Product. VTech provides no other warranties
for this Product. The warranty exclusively
describes all of VTech’s responsibilities regarding
Specifications are subject to change without notice.
© 2018 VTech Communications, Inc.
All rights reserved. 05/18. CS5119-X_ACIB_V8.0
Document order number: 91-008938-070-100
Transfer a call
While on an outside call, you can use the
intercom feature to transfer the call from one
handset to another.
1. Press INT on your handset during a call. The
current call is put on hold. Use the dialing
keys to enter a destination handset number if
necessary.
2. To answer the intercom call, press , , or
any dialing key on the destination handset.
You can now have a private conservation
before transferring the call.
3. on your originating handset, or Press OFF
place it back in the telephone base or charger.
Your originating handset displays Line in use.
The destination handset is then connected to
the outside call.
Phonebook
The phonebook can store up to 50 entries, which
are shared by all handsets. Each entry may
consist of a telephone number up to 30 digits,
and a name up to 15 characters.
Add a phonebook entry
1. Enter the number when the phone is not in
use. Press , then go to Step 3.MENU
-OR-
Press MENU when the phone is not in use,
then press SELECT to choose Phonebook.
Press SELECT Add new again to choose
entry.
2. Use the dialing keys to enter the number.
-OR-
Copy a number from the redial list by pressing
REDIAL and then press , or REDIAL
repeatedly to select a number. Press SELECT
to copy the number.
3. to move on to enter the name.Press SELECT
4. Use the dialing keys to enter the name.
Additional key presses show other characters
of that particular key.
5. Press SELECT to save.
While entering names and numbers, you can:
• to backspace and erase a Press DELETE
digit or character.
• Press and hold to erase the entire DELETE
entry.
• or to move the cursor to the left Press
or right.
• Press and hold to insert a dialing PAUSE
pause (for entering numbers only).
• Press 0 to add a space (for entering names
only).
Review a phonebook entry
Entries are sorted alphabetically.
1. Press when the phone is not in use.
2. Scroll to browse through the phonebook, or use
the dialing keys to start a name search.
Delete a phonebook entry
1. When the desired entry displays, press
DELETE.
2. When the handset displays Delete entry?,
press SELECT.
Edit a phonebook entry
1. When the desired entry displays, press
SELECT.
2. Use the dialing keys to edit the number, then
press SELECT.
3. Use the dialing keys to edit the name, then
press SELECT.
Dial a phonebook entry
• When the desired entry appears, press or
to dial.
Caller ID
If you subscribe to caller ID service, information
about each caller appears after the first or
second ring. If you answer a call before the caller
information appears on the screen, it will not be
saved in the caller ID log.
The caller ID log stores up to 30 entries. Each
entry has up to 24 digits for the phone number
and 15 characters for the name.
If the telephone number has more that 15
digits, only the last 15 digits appear. If the name
has more than 15 characters, only the first 15
characters are shown and saved in the caller ID
log.
Review a caller ID log entry
1. Press CID when the phone is not in use.
2. Scroll to browse through the caller ID log.
Missed call indicator
When there are calls that have not been
reviewed in the caller ID log, the handset
displays XX missed calls.
Each time you review a caller ID log entry
marked NEW, the number of missed calls
decreases by one.
When you have reviewed all the missed calls, the
missed call indicator no longer displays.
If you do not want to review the missed calls
one by one, press and hold on the idle CANCEL
handset to erase the missed call indicator. All the
entries are then considered old.
Dial a caller ID log entry
• When the desired entry appears, press or
to dial.
Save a caller ID log entry to the phonebook
1. When the desired caller ID log entry displays,
press SELECT.
2. to choose Press SELECT To Phonebook.
3. Use the dialing keys to edit the number, if
necessary. Then press SELECT.
4. Use the dialing keys to edit the name, if
necessary. Then press SELECT.
Delete the caller ID log entries
• When the desired caller ID log entry displays,
press DELETE.
To delete all caller ID log entries:
1. Press MENU when the phone is not in use.
2. Scroll to Caller ID log and then press
SELECT.
3. Scroll to Delete all then press SELECT twice.
Call block
If you have subscribed to caller ID service, you
can set the telephone to block unknown calls
and certain undesired calls. The call block list
can store up to 20 entries.
Block unknown calls
1. Press MENU when the handset is not in use.
2. Scroll to and then press Call block SELECT.
3. Scroll to choose , and then Calls w/o num
press SELECT.
4. Scroll to choose or , and then Unblock Block
press SELECT to save.
Add a call block list entry
1. Press MENU when the handset is not in use.
2. Scroll to and then press Call block SELECT.
3. to choose .Press SELECT Block list
4. Scroll to choose Add new entry, and then
press SELECT.
5. Use the dialing keys to enter the number (up
to 30 digits).
6. to move on to enter the name.Press SELECT
7. Use the dialing keys to enter the name (up to
15 characters). Additional key presses show
other characters of that particular key.
8. Press SELECT to save.
Review call block list
1. Press MENU when the handset is not in use.
2. Scroll to and then press Call block SELECT.
3. to choose .Press SELECT Block list
4. Press SELECT to choose Review.
Edit a call block list entry
1. When the desired entry displays, press
SELECT.
2. Use the dialing keys to edit the number, and
then press SELECT.
3. Use the dialing keys to edit the name, and
then press SELECT to save.
Save a caller ID log entry to call block list
1. When the desired caller ID log entry displays,
press SELECT.
2. Scroll to To Call block, and then press
SELECT.
3. Use the dialing keys to edit the number, and
then press SELECT.
4. Use the dialing keys to edit the name, and
then press SELECT to save.
Delete a call block list entry
• When the desired call block list entry displays,
press DELETE.
Mute rst ring
Your telephone rings once for blocked calls. You
can choose to mute the first ring for all incoming
calls, so that there will be no ring for blocked
calls. By default, the first ring is set to .On
1. Press MENU when the handset is not in use.
2. on the handset.Press 7464#
3. Press or to choose First ring:On to
keep the first ring, or to mute First ring:Off
the first ring.
4. Press SELECT to save.
NOTE
• If you have muted the first ring, you will hear one
ring less before the voicemail answers the incoming
calls.
Sound settings
Key tone
You can turn the key tone on or off.
1. Press MENU when the handset is not in use.
2. Scroll to and then press Settings SELECT.
3. Scroll to choose , then press Key tone
SELECT.
4. Press or to choose or On Off, then
press SELECT to save.
the Product. There are no other express
warranties. No one is authorized to make
modifications to this limited warranty and you
should not rely on any such modification.
State/Provincial Law Rights: This warranty gives
you specific legal rights, and you may also have
other rights, which vary from state to state or
province to province.
Limitations: Implied warranties, including
those of fitness for a particular purpose and
merchantability (an unwritten warranty that the
Product is fit for ordinary use) are limited to one
year from the date of purchase. Some states/
provinces do not allow limitations on how long an
implied warranty lasts, so the above limitation may
not apply to you. In no event shall VTech be liable
for any indirect, special, incidental, consequential,
or similar damages (including, but not limited to
lost profits or revenue, inability to use the Product
or other associated equipment, the cost of
substitute equipment, and claims by third parties)
resulting from the use of this Product. Some
states/provinces do not allow the exclusion or
limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply
to you.
Please retain your original sales receipt
as proof of purchase.
Technical specications
Frequency
control
Crystal controlled PLL
synthesizer
Transmit
frequency
Handset:
1921.536-1928.448 MHz
Telephone base:
1921.536-1928.448 MHz
Channels 5
Nominal
effective
range
Maximum power allowed by
FCC and IC. Actual operating
range may vary according to
environmental conditions at the
time of use.
Power
requirements
Handset: 2.4V Ni-MH battery
Telephone base:
6V DC @ 400mA
Charger: 6V DC @ 400mA
Memory Phonebook:
50 memory locations;
up to 30 digits and 15 characters
Caller ID log:
30 memory locations;
up to 24 digits and 15 characters
Call block: 20 entries

Especificaciones del producto

Marca: VTech
Categoría: telefono
Modelo: CS5119

¿Necesitas ayuda?

Si necesitas ayuda con VTech CS5119 haz una pregunta a continuación y otros usuarios te responderán


telefono VTech Manuales

VTech

VTech CS5119-16 Manual de Usario

12 Septiembre 2024
VTech

VTech DS6101 Manual de Usario

12 Septiembre 2024
VTech

VTech DS6071 Manual de Usario

23 Agosto 2024
VTech

VTech 15550 Manual de Usario

19 Agosto 2024
VTech

VTech CS5119 Manual de Usario

12 Agosto 2024

telefono Manuales

Últimos telefono Manuales

Realme

Realme 6s Manual de Usario

27 Octubre 2024
BT

BT Freestyle 2010 Manual de Usario

26 Octubre 2024
FlyingVoice

FlyingVoice IP622WP Manual de Usario

26 Octubre 2024
Huawei

Huawei Nova 9 Pro Manual de Usario

23 Octubre 2024
Yealink

Yealink MP56 Manual de Usario

21 Octubre 2024
Profoon

Profoon PDX-5900 Manual de Usario

19 Octubre 2024
Gigaset

Gigaset A400A Manual de Usario

18 Octubre 2024
Alcatel

Alcatel Smile Manual de Usario

18 Octubre 2024
Belgacom

Belgacom Twist 555 duo Manual de Usario

17 Octubre 2024
Emporia

Emporia Select Basic Manual de Usario

17 Octubre 2024