Waring Commercial MX1050XTP Manual de Usario

Lee a continuación 📖 el manual en español para Waring Commercial MX1050XTP (13 páginas) en la categoría Licuadora. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/13
Hi-Power Blenders
Licuadora de alta potencia
Mélangeurs/Bols mixeurs à haute puissance
MX1000XTX/MX1000XTP/MX1000XTS
MX1050XTX/MX1050XTP/MX1050XTS
MX1100XTX/MX1100XTP/MX1100XTS
OPERATING MANUAL
MANUAL DE INSTRUCCIONES
MANUEL D'UTILISATION
2
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed including the following:
1. READ ALL INSTRUCTIONS.
2. To protect against risk of electrical shock, do not put appliance in
water or other liquid.
3. Always unplug from outlet prior to handling or cleaning.
4. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with
the appliance.
5. Unplug from outlet when not in use, before putting on or taking off
parts, and before cleaning.
6. Avoid contact with moving parts.
7. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions or is dropped or damaged in any
manner. Return appliance to the nearest authorized service facility
for examination, repair, or electrical or mechanical adjustment.
8. The use of attachments, including canning jars, not recommended
by the appliance manufacturer may cause hazards.
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter, or touch hot
surfaces.
11. Keep hands and utensils out of container while blending, to prevent
the possibility of severe personal injury and/or damage to the
blender. A rubber scraper may be used, but must be used only
when the blender is not running.
12. Blades are sharp. Handle carefully.CAUTION:
13. Always operate blender with lid in place.
14. When blending hot liquids, remove center piece of two-piece cover.
See hot blending instructions, page 6.
15. The use of ear protection is recommended during extended
operating periods.
16. Do not leave blender unattended while it is running.
17. See cleaning and sanitizing instructions, pages 6-8.
NOT FOR WATERJET CLEANING.
SAVE THESE INSTRUCTIONS
GROUNDING
4
MX1000XTX/MX1000XTP/MX1000XTS OPERATION
1. Before starting, make sure that the blender
is unplugged.
2. With the unit in Off position, place container on
blender base. Be sure container is fully seated and
that drive coupling is properly engaged. Plug
blender cord into outlet.
3. Put ingredients into container and cover it. Do not
fill above MAX line.
4. This blender has 2 speed settings: Hi and Low. Press paddle switch
to desired position. To crush ice quickly, use high speed setting.
5. When finished blending, set paddle switch to Off position.
6. This blender is equipped with a pulse option. Hold paddle switch in
down position to engage pulse function. Unit will run on high speed
until the paddle switch is released.
7. Allow motor to come to a complete stop before removing container
from blender base. Never place the container on the motor base or
remove it from the motor base while motor is running.
8. Always hold container with one hand when starting and while blending.
Never operate without jar lid.
9. Wash and dry container after each use. See cleaning and sanitizing
instructions, pages 6-8.
MX1050XTX/MX1050XTP/MX1050XTS OPERATION
Follow steps 1-3 above.
1. This blender is equipped with an electronic
membrane keypad. The keypad has a main power
On/Off button, and High and Low, Stop and
Pulse buttons.
2. Press the On/Off button to turn on the blender.
Green LED will illuminate. For continuous opera-
tion, press either Low or High button. When finished
blending, press Stop. For momentary operation, press the Pulse button;
motor will run on High speed until the button is released.
NOTE: Your MX1050XTX utilizes a Slow Start feature. When pressing
High, the unit will start in the low speed for 2 seconds and then switch
to high speed. This allows for a more even blending of ingredients
in container.
3. Allow motor to come to a complete stop before removing container from
blender base. Never place the container on the motor base or remove it
from the motor base while motor is running.
4. Always hold container with one hand when starting and while blending.
Never operate without jar lid.
5. Wash and dry container after each use. See cleaning and sanitizing
instructions, pages 6-8.
6. To turn the unit off, press On/Off button. Green LED light will go off.
MX1100XTX/MX1100XTP

Especificaciones del producto

Marca: Waring Commercial
Categoría: Licuadora
Modelo: MX1050XTP

¿Necesitas ayuda?

Si necesitas ayuda con Waring Commercial MX1050XTP haz una pregunta a continuación y otros usuarios te responderán




Licuadora Waring Commercial Manuales

Licuadora Manuales

Últimos Licuadora Manuales