Westinghouse DSK963S Manual de Usario

Lee a continuación 📖 el manual en español para Westinghouse DSK963S (8 páginas) en la categoría horno. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
Tipolitografia Mont agnani - Modena (Italy) - 1106Cod. 535340 / B
AU
INSTRUCTIONS
BOOKLET
14 3
If, after checking through this section, you cannot resolve
your problem, please call Electrolux service center 131349.
When ordering please quote the appliance name, the colour
variant and serial number.
This information can be found on the data plate sealed inside
the front appliance drawer.
OVEN DOES NOT WORK AT ALL
First, when the oven is equipped with timer, check appliance is
not programmed to turn on later. If it is, turn to manual setting (i.e.
hand symbol). If the button or scale on the timer remains in the
automatic position after use, the power supply to the oven will be
interrupted. Also, check your appliance is switched on at the
mains. Next check for an unexpected power strike by switching
on adjacent lights etc. Finally, check fuses and plug wiring. If all
these prove satisfactory, call engineer.
LIGHT BULB DOESNT COME ON
Check bulb for looseness or burned out bulb.
Note: bulb replacement is not covered by your guarantee.
SMOKE COMING FROM OVEN
If oven is still relatively new, this problem is invariably due to
protective oil on elements. Otherwise, the answer may be oil or
fat which has become deposited on the elements during cooking.
In either event, continued use should burn away the residues.
CLOCK/TIMER DOES NOT WORK
Check to be sure range cord is plugged into outlet completely.
Check for a blown fuse or tripped circuit breaker. Check for power
outage. Check step by step operating Instructions on previous
pages.
additional ventilation, for example opening a window, or more
effective ventilation, for example increasing the level of mechanical
ventilation where present. For more detail see the Installation
Instructions.
OVERALL DIMENSIONS
SECTION FOR THE QUALIFIED TECHNICIAN
OVERALL DIMENSIONS
895
1450/1500
610
100
850/900
910/960
PROBLEM SOLVER
Any of the following are considered to be abnormal operation
and may require servicing:
Yellow tipping of the hob burner flame.
Sooting up of cooking utensils.
Burners not igniting properly.
Burners failing to remain alight.
Burners extinguished by oven door.
Gas valves, which are difficult to turn.
Your Installer should be contacted if you have any problems with
the installation.
Before you call a service engineer please check if the problem
is something you could fix yourself. The cause of the problem is
often a simple one.
THINGS TO TRY BEFORE CALLING FOR A SERVICE
TECHNICIAN
Burner does not burn well
Is the burner dirty or damp? Try cleaning and/or drying the burner.
Appliance not suitable for your gas type? Check the identification
plate on the hotplate base.
Burner does not ignite
Do the burners spark when you press the ignition button? If not
is the power on? See Checking the power supply section further
on. If the power supply is OK then there is probably something
wrong with the ignition system.
Are the electrode or burner slots blocked by debris?
Is the burner dirty or damp? Try cleaning and/or drying the burner.
Is the burner trim correctly located?
Are the burner caps correctly located?
Check that there is not a problem with your gas supply. You can
do this by making sure that other gas appliances you may have
are working.
Pan supports
Aluminium pans may cause a metallic marking on the pan supports
which does not affect the durability of the enamel and may be
cleaned off with a metal cleaner such as Brasso.
Checking the power supply
First check the socket by trying out another piece of electrical
equipment in it.
If that works, renew the fuse in the hotplate plug. Use a 10 amp
fuse. If the fuse blows again there is a fault on the hotplate. Do
not use a fuse with a higher rating. Do not carry out other electrical
work. Unplug the hotplate and tell your installer.
Power Failure
In the event of a failure in the electrical supply the hotplate burners
may be lit using a match.
Ventilation
The use of a gas cooking appliance results in the production of
heat and moisture in the room in which it is installed. Ensure that
the kitchen is well ventilated: keep natural ventilation holes open
or install a mechanical ventilation device, (mechanical extractor
hood). Prolonged intensive use of the appliance may call for
hotplate and out of danger, particularly from small children.
Never leave a chip pan unattended.
Pans and kettles with down turned base rims should not be
used.
Simmering aids such as asbestos or mesh mats are NOT
recommended. They will reduce burner performance and could
damage the pan supports.
Commercially available foil spillage aids are unnecessary on
this hotplate.
PROVISION FOR VENTILATION
INSTALLATION
The room where the Cooker is installed should have permanent
ventilation as follows:
Ventilation must be in accordance with AS5601/AG 601 - Gas
Installations. In general, the appliance should have adequate
ventilation for complete combustion of gas, proper flueing and to
maintain temperature of immediate surroundings within safe limits.
- Do not install in a bed-sitting room, a bathroom or shower room.
If there is another fuel burning appliance in the same room, a
higher level of ventilation will be required, you should consult
" the safety requirements".
In addition to the above, during prolonged use, opening a window
in the same room is recommended. This will avoid the build up
of excessive moisture and condensation.
The appliance be installed by and authorised person inMUST
accordance with the requirements of AS/NZS3000.
The cooker MUST be installed and serviced by a qualified technician
A Certificate of Compliance be supplied to be kept by theMUST
customer.
The packing materials be removed before you install theMUST
cooker.
You follow the installation instructions in this book.MUST
The surrounding kitchen cabinets be able to withstand 85CMUST
The pipes used for installation MUST have sufficient loops so the
cooker can be moved for service.
The vents, openings and air spaces not be blockedMUST
The anti-tilt bracket oid accidental tippingMUST be installed to av
You MUST not pull the cooker by the door handles or rear splash
panel.
The cooker be checked every five years.MUST
SAFETY WARNINGS ABOUT INSTALLATION
RECORD HERE FOR EASY REFERENCE
Model Colour
Serial Number Installation Date
Dealer's Name and Address
GENERAL INFORMATION
Getting to know your new cooker
Thank you for choosing one of our products.
Our cookers are of simple, rational design. They are
constructed to the best standards to ensure good
service and outstanding safety.
Please read this manual carefully; it will provide all the
advice needed to allow you to obtain the best results
from the very first day.
ATTENTION:
- Before using the appliance, do not forget to remove the
protecting parts of the appliance.
ENVIRONMENTAL WARNING
Waste packaging
Do not throw the packaging of your appliance into the dustbin,
but pick out the different materials (for instance foil, paperboard,
polystyrene) according to the local rules for rubbish elimination.
This appliance must only be used for the purpose of domestic
cooking.
WARNING -Accessible parts will become hot when in use.
To avoid burns and scalds children should be kept away.
- WARNING:
The appliances is not intended for use by children or infirm
persons. Young children and infirm persons should not be left
unsupervised in the vicinity.
- WARNING:
A steam cleaner is not to be used cleaning this appliances.
- WARMING
DO NOT place inflammable materials or plastic utensils in the
warming drawer.
- WARNING -
In order to prevent accidental tipping of the appliance, for example
by a child climbing onto the open oven door, the stabilizing means
must be installed.
- WARNING
This appliance is not intended for use by young children or infirm
persons without supervision.
Young children should be supervised to ensure that they do not
play with the appliance.
- WARNING
Before you use the appliance for the first time, check that the
plastic films protecting some parts (fascia panel, parts in stainless
steel, etc.) have been removed.
WHERE THIS APPLIANCE IS INSTALLED IN MARINE CRAFT
OR IN CARAVANS, IT SHALL NOT BE USED AS A SPACE
HEATER
WHEN YOU CALL FOR SERVICE
When you call for service or order parts for your unit, be
sure to give:
1. MODEL
2. SERIAL NUMBER
3. COLOUR
4. PART NAME and/or description of problem
5. YOUR FULL NAME, ADDRESS, and HOME TELEPHONE
NUMBER and BUSINESS TELEPHONE NUMBER IF
APPROPRIATE.
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE
WHILE IT IS IN OPERATION.

Especificaciones del producto

Marca: Westinghouse
Categoría: horno
Modelo: DSK963S
Color del producto: Aqua-kleur
Longitud del cable: 23 m
Certificación: TIA/EIA-568-C.3\nTIA-604-5 (FOCIS-5)\nTIA/EIA-568-C.1
Certificados de sostenibilidad: RoHS
Cantidad por paquete: 1 stuk(s)
No contiene: Halogeen
Temperatura de almacenamiento: -40 - 70 °C
Ratio de transferencia: 10 Gbit/s
Temperatura de funcionamiento (TT): -10 - 60 °C
Conexión 1: PanMPO
Conexión 2: PanMPO
Conexión 1 tipo: Vrouwelijk
Tipo de conexión 2: Vrouwelijk
Pérdida de inserción: 0.5 dB
Estructura de modo de cable: Multimode
Material de la funda exterior: Halogeenvrij
Pérdida de reflexión: 26 dB
Diámetro-central: 50 µm
Diámetro de tapizado: 125 µm
Tipo de fibra óptica: OM3

¿Necesitas ayuda?

Si necesitas ayuda con Westinghouse DSK963S haz una pregunta a continuación y otros usuarios te responderán




horno Westinghouse Manuales

horno Manuales

Últimos horno Manuales