Whirlpool ADG 8341 NB Manual de Usario

Whirlpool Vaatwasser ADG 8341 NB

Lee a continuación 📖 el manual en español para Whirlpool ADG 8341 NB (10 páginas) en la categoría Vaatwasser. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/10

INSTRUCTIONS FOR USE

BEFORE USING THE DISHWASHER/

CONNECTIONS

ELECTRICAL CONNECTION

PRECAUTIONS AND GENERAL

RECOMMENDATIONS

HOW TO FILL THE SALT CONTAINER

HOW TO FILL THE RINSE AID DISPENSER

HOW TO FILL THE DETERGENT DISPENSER

CARE AND MAINTENANCE

BEFORE USING THE DISHWASHER/

CONNECTIONS

1. Removing the packaging and controls:

After unpacking, make sure that the dishwasher is

undamaged and that the door closes correctly. If in

doubt, contact a qualified technician or your local

retailer.

•Keep the packaging materials (plastic bags,

polystyrene parts, etc.) out of reach of children, as

they are potentially dangerous.

•This dishwasher has been factory tested to ensure

it functions correctly.

Such testing may leave slight water marks that will

disappear with the first wash.

2. Water and electrical connections:

All water and electrical connections must be

carried out by a qualified technician in compliance

with the manufacturer's instructions (refer to the

enclosed installation booklet) and current local

safety regulations.

The appliance must only be used in the household

for the prescribed uses.

Do not use the dishwasher if it has been damaged

in transit. Consult your local retailer or our

After-Sales Service.

(Refer to the separate installation

instructions booklet)

3. Water inlet and drain:

•Observe any special regulations issued by your local

Water Board.

Water supply pressure: 0.3 - 10 bar.

•Make sure the inlet and drain hoses are kink-free

and are not crushed.

•If the hose length is not sufficient, please contact

your local dealer or our After-Sales Service.

•The inlet hose must be securely clamped to the

water tap to prevent leaks.

•The inlet water temperature varies according to

the model installed. Inlet hose marked “25°C Max”:

maximum temperature 25°C.

All other models: maximum temperature 60°C.

•When installing the appliance, make sure the drain

water discharges correctly (if necessary, remove

the wire gauze from the sink siphon).

•Fix the drain hose to the spigot with a clamp to

prevent it from coming off during operation.

For appliances with water-stop system only: If the

water connections are made correctly, the water-

stop system safeguards your home against damage

caused by flooding.

4. Electrical connection:

•Closely adhere to local Electricity Board

regulations.

•Voltage information is shown on the rating plate

mounted inside the door on the right hand side.

•The appliance must be earthed as prescribed by law.

•Do not use extension leads or multiple adapters.

•Before carrying out maintenance, disconnect the

mains plug.

•If necessary, the power cable may be replaced with

one the same obtained from our After-Sales

Service. The power cable must only be replaced by

a qualified technician.

Warning for models provided with LCD

display:

The mains plug must be positioned in an easily

accessible place.

• For Austria: if the apparatus is series connected to

a fault current switch, this must be sensitive to the

pulsating current.

ELECTRICAL CONNECTION

1) For Great Britain only

Warning - this appliance must be earthed

Fuse replacement

If the mains lead of this appliance is fitted with a BS 1363A 13amp

fused plug, to change a fuse in this type of plug use an A.S.T.A.

approved fuse to BS 1362 type and proceed as follows:

1. Remove the fuse cover (A) and fuse (B).

2. Fit replacement 13A fuse into fuse cover.

3. Refit both into plug.

Important:

The fuse cover must be fuse and if the fuse refitted when changing a

cover is lost the plug must not be used until a correct replacement is

fitted.

Correct replacement are identified by the colour insert or the colour

embossed in words on the base of the plug.

Replacement fuse covers are available from your local electrical

store.

2) For the Republic of Ireland only

The information given in respect of Great Britain will frequently

apply, but a third type of plug and socket is also used, the

2-pin, side earth type.

3) Socket outlet / plug (valid for both countries)

If the fitted plug is not suitable for your socket outlet, please contact

Whirlpool Service for further instruction. Please do not attempt to

change plug yourself. This procedure needs to be carried out by a

qualified Whirlpool technician in compliance with the manufactures

instructions and current standard safety regulations.

Especificaciones del producto

Marca:	Whirlpool
Categoría:	Vaatwasser
Modelo:	ADG 8341 NB
Color del producto:	Black, Pink
Peso del embalaje:	1000 g
Ancho del embalaje:	285 mm
Empaquetadura en profundidad:	100 mm
Altura del embalaje:	250 mm
Número de velocidades:	2
Activos:	- W
Diseñado para viajar:	Nee
Función de disparo frío:	Ja
función iónica:	Ja
Boquilla concentradora:	Nee
Difusor de cabeza:	Nee
Número-de-ajustes-de-temperatura:	3
Cable giratorio:	Ja
Revestimiento ceramico:	Ja