Whirlpool AKT 6465 Manual de Usario

Whirlpool horno AKT 6465

Lee a continuación 📖 el manual en español para Whirlpool AKT 6465 (7 páginas) en la categoría horno. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/7

EE PLLT LV

400011131586

IMPORTANT SAFETY INSTRUCTIONS

These instructions shall also be available on website: www.whirlpool.eu

YOUR SAFETY AND THE SAFETY OF OTHERS ARE VERY IMPORTANT

This manual and the appliance itself provide important safety messages, to be read and observed at all times.

This is the safety alert symbol, pertaining to safety, which alerts users to potential hazards to themselves and others.

All safety messages will follow the safety alert symbol and either the terms:

DANGER

Indicates a hazardous situation which, if not avoided, will cause serious injury.

RNINGWA

Indicates a hazardous situation which, if not avoided, could cause serious injury.

All Safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are

not followed.

• The appliance must be disconnected from the power supply before carrying out any installation work.

• Installation and maintenance must be carried out by a qualied technician, in compliance with the manufacturer’s instructions and local safety regulations.

Do not repair or replace any part of the appliance unless specically stated in the user manual.

RNINGWA

If the information in this manual is not followed exactly, a re or explosion may result causing property damage or injury.

• Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this appliance.

What to do if you smell gas:

- Do not tr .y to light any appliance

- Do not touch any electrical switch.

- Do not use any phone in your building.

- Immediately call your gas supplier from a neighbor phon s su’s e. Follow the ga pplier’s instructions.

- If you cannot reach your gas supplier, call the fire department.

- Installation and service must be performed by a qualified installe serr, vice agency or the gas supplier.

- Use appliance in well ventilated rooms only.

The electrical and gas connections must comply with local regulations.

• When the hob is installed, provide a multi-pole circuit breaker with a contact separation of at least 3 mm, that provides full disconnection.

• Regulations require that the appliance is grounded.

• The power cable must be long enough for connecting the appliance, once tted in its housing, to the power supply.

• Use only exible or rigid metal hose for gas connection.

• If necessary, the electrical power cable must be replaced exclusively with a power cable having identical characteristics to the original supplied by manufacturer

(type H05V2V2-F 90°C or H05RR-F). This operation must be performed by a qualied electrician.

• The manufacturer cannot be held responsible for any injury to persons or animals or damage to property arising from failure to comply with these requirements.

• Do not use multiple plug adapters or extension cords.

• Do not pull the power supply cord in order to unplug the appliance.

• The electrical components must not be accessible to the user after installation.

• Do not touch the appliance with any wet part of the body and do not operate it when barefoot.

• This hob (class 3) is designed solely for private household use for cooking food. Do not use this appliance as a space heater to heat or warm the room.

Doing so may result in carbon monoxide poisoning and overheating of the hob. The Manufacturer declines all responsibility for inappropriate use or incorrect

setting of the controls.

• The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or with lack of experience and

knowledge of the appliance, unless supervised or previously instructed in its use by those responsible for their safety.

• Young children should be kept away from the appliance and supervised to ensure that they do not play with it.

• The use of a gas appliance produces heat and humidity in the room. Make sure the room is well-ventilated, or install an extractor hood with exhaust duct.

• In case of prolonged use, additional ventilation may be necessary (by opening a window or increasing the hood extraction speed).

• After use, make sure the knobs are in off position and close the main gas supply cock or the gas cylinder valve.

• Overheated oils and fats catch re easily. Always remain vigilant when cooking foods rich in fat, oil or alcohol (e.g. rum, cognac, wine).

• Keep the packaging materials out of the reach of children.

• Before cleaning or maintenance wait for hob to cool down.

• These instructions are valid only for those countries whose symbol is shown on the rating plate (under cooktop).

• This product is not intended to be installed and operated outdoor.

CAUTION: In case of hotplate glass breakage:

• shut immediately off all burners and any electrical heating element and isolate the appliance from the power supply;

• do not touch the appliance surface;

• do not use the appliance.

SAVE THESE INSTRUCTIONS

BUILT-IN GAS HOB

INSTALLATION

After unpacking the hob, make sure that it has not been damaged during transport. In the event of problems, contact the dealer or your nearest After-sales Service.

TECHNICAL INFORMATION FOR THE INSTALLER

• Use protective gloves for handling, preparing and installing the product.

• This product can be embedded in a worktop 20 60 mm thick.÷

• If there is no oven beneath the hob, insert a separator panel that has a surface at least equal to the opening in the work surface. This panel must

be positioned at a maximum distance of 150 mm below the upper surface of the work surface but, in no case less than 20 mm from the bottom

of the hob. In the case that you intend to install an oven beneath the hob, make sure that it is equipped with a cooling system. The manufacturer

declines all liability if another brand oven is installed beneath the hob.

Before installation, make sure that:

• the local gas delivery conditions (nature and pressure) are compatible with the settings of the hob (see the rating plate and injector table);

• the outer surfaces of the furniture or appliances adjacent to the hob are heat resistant according to local regulations;

• this appliance is not connected to a fume exhaust device. It shall be installed in accordance with current installation regulations. Particular attention shall

be given to the relevant requirements regarding ventilation;

• combustion products are discharged outdoors through specic hoods or wall and/or window mounted electrical fans.

GAS CONNECTION

RNINGWA

This operation must be performed by a qualied technician.

• The gas supply system must comply with local regulations.

• You can nd specic local regulations for some countries in the paragraph “Reference to Local Regulations”.

If no information concerning your Country is given, please ask details to your Installer.

• The connection of the hob to the gas pipe network or gas cylinder must be made by means of a rigid copper

or steel pipe with ttings complying with local regulations, or by means of a continuous-surface stainless steel

hose complying with local regulations. The maximum length of the hose is 2 linear metres.

• Connect elbow (A)* or (B)* supplied with to the hob inlet main pipe and interpose the washer (C) supplied,

in compliance with EN 549.

* Use elbow (A) for France and elbow (B) for all other destinations.

IMPORTANT: if a stainless steel hose is used, it must be installed so as not to touch any mobile part of

the furniture. It must pass through an area where there are no obstructions and where it is possible to

inspect it on all its length.

• After connection to the gas supply, check for leaks with soapy water. Light up the burners and turn the knobs

from max position to check ame stability. to minimum position

ELECTRICAL CONNECTION

RNINGWA

This operation must be performed by a qualied technician.

Earth

(yellow/green)

RNINGWA

• The electrical connections must comply with local regulations.

• The earthing of this appliance is compulsory by law.

• Do not use an extension cord.

IMPORTANT: the data relevant to the voltage and power absorption are indicated on the rating plate.

ASSEMBLY

After having cleaned the perimeter surface, apply the supplied gasket to the hob as shown in the gure.

Position the hob in the worktop opening made respecting the dimensions indicated in the Instruction.

NOTE: the power supply cable must be long enough to permit its upward extraction.

To secure the hob, use the brackets ( ) provided with it. Fit the brackets into the relevant bores shown by the arrow and fasten them by means of their screws A

in accordance with the thickness of the worktop (see the following gures).

Top 20 mm Top 40 mm

Top 30 mm Top 60 mm

ADJUSTMENT TO DIFFERENT TYPES OF GAS

RNINGWA

This operation must be performed by a qualied technician.

If the appliance is intended to operate with a different gas from the gas type stated on the rating plate and information label on the top of the hob, change the

injectors.

Remove the information label and keep it with the instructions booklet.

Use pressure regulators suitable for the gas pressure indicated in the Instruction:

• the gas injector must be changed by After Sales Service or a qualied technician;

• injector not supplied with the appliance must be ordered from After Sales Service;

• adjust the minimum setting of the taps.

NOTE: when liquid petroleum gas is used (G30/G31), the minimum gas setting screw must be tightened as far as it will go.

IMPORTANT: should you experience difculty in turning the burners knobs, please contact the After Sales Service for the replacement of the burner

tap if found to be faulty.

IMPORTANT: when gas cylinder is adopted, the gas cylinder or gas container must be properly settled (vertical orientation).

REPLACING THE INJECTORS (see the injector table in the Instruction)

• Remove grids ( ).A

• ).Extract burners (B

• Using a socket spanner of the appropriate size unscrew the injector (C), unscrew the injector

to be replaced.

• Replace it with the injector suitable for the new type of gas.

• Re-assemble the injector in ( ).D

• If you have a multiple crown burner use side spanner to replace the injector ( ).E

Before installing the hob, remember to afx the gas calibration plate supplied with the injectors in

such a way that it covers the existing information relating to gas calibration.

ADJUSTING MINIMUM GAS SETTING OF TAPS

To ensure that the minimum setting is correctly adjusted, remove the knob and proceed as follows:

• tighten screw to reduce the ame height (-);

• loosen screw to increase the ame height (+).

The adjustment must be performed with the tap in minimum gas setting position (small ame) :

• the primary air of the burners does not need to be adjusted;

• at this stage, light up the burners and turn the knobs from max position to minimum position

to check ame stability.

Upon completion of adjustment, reseal using sealing wax or an equivalent material.

REFERENCE TO LOCAL REGULATIONS

EE PLLT LV

Ensure that the installation and gas connections are performed by a qualied technician, following the manufacturer’s instructions and in compliance with

current local safety regulations.

Especificaciones del producto

Marca:	Whirlpool
Categoría:	horno
Modelo:	AKT 6465
Color del producto:	Grey, Silver
Peso.:	2300 g
Ancho:	380 mm
Profundidad:	251 mm
Capacidad del acumulador/batería:	2600 mAh
Frecuencia del adaptador de CA:	50 - 60 Hz
Voltaje de entrada del adaptador de CA:	100 - 240 V
Bluetooth:	Ja
Diagonal de la pantalla:	15.6 "
Resolución:	1366 x 768 Pixels
Pantalla táctil:	Nee
Relación de aspecto original:	16:9
Frecuencia del procesador:	1.6 GHz
Familia de procesadores:	Intel® Core™ i5
Modelo de procesador:	i5-4200U
Número de núcleos de procesador:	2
Estándares wifi:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
factor vorm:	Clamshell
Incluye sistema operativo:	Windows 8
red LAN:	Ja
Lector de tarjetas de memoria integrado:	Ja
Tarjetas de memoria compatibles:	SD, SDHC, SDXC
Sistema de audio:	SonicMaster
Litografía del procesador:	22 nm
luz de fondo LED:	Ja
Número de puertos USB 2.0:	2
Puerto(s) VGA (D-Sub):	1
Número de puertos HDMI:	1
Micrófono, entrada de línea:	Nee
Puerto DVI:	Nee
Número de puertos Ethernet LAN (RJ-45):	1
Opción de montaje de bloqueo de cable:	Ja
Tipo de ranura para candado de cable:	Kensington
Protección de contraseña:	Ja
Adaptador de CA, alimentación:	65 W
Micrófono incorporado:	Ja
Memoria interna:	6 GB
Medios de almacenamiento:	HDD
Tipo de memoria interna:	DDR3L-SDRAM
Protección-de-contraseña:	BIOS, HDD, User
Estándar Wi-Fi:	Wi-Fi 4 (802.11n)
LAN Ethernet, velocidades de transferencia de datos:	10,100,1000 Mbit/s
Pantalla inalámbrica Intel® (Intel® WiDi):	Ja
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	1
Zócalo del procesador:	BGA 1168
paso a paso:	C0
Sistema de autobús:	- GT/s
Hilos internos del procesador:	4
Versión de ranuras PCI Express:	2.0
Modos de funcionamiento del procesador:	64-bit
Caché del procesador:	3 MB
cruce:	100 °C
Tipo de autobús:	DMI2
Configuraciones PCI Express:	1x4, 2x4
Potencia de diseño térmico (TDP):	15 W
Procesador de nombre en clave:	Haswell
Número máximo de líneas PCI Express:	12
Tipo de caché del procesador:	Smart Cache
ECC soportado por el procesador:	Nee
Fabricante del procesador:	Intel
Arquitectura del sistema operativo:	64-bit
Memoria interna máxima:	- GB
Capacidad total de almacenamiento:	1000 GB
Tipo de unidad óptica:	DVD±RW
Adaptador de gráficos incorporado:	Ja
Adaptador de gráficos integrado familiar:	Intel® HD Graphics
Modelo de adaptador de gráficos integrado:	Intel® HD Graphics 4400
Adaptador gráfico integrado de frecuencia básica:	200 MHz
Frecuencia dinámica del adaptador gráfico integrado (máx.):	1000 MHz
ID del adaptador de gráficos integrado:	0xA16
Adaptador de gráficos integrado de memoria máxima:	1.74 GB
Adaptador de gráficos integrado Versión DirectX:	12
Cámara frontal:	Ja
Teclado numérico:	Ja
Conjuntos de instrucciones soportados:	AVX 2.0
Tecnología Intel® Mi WiFi (Intel® MWT):	Ja
Tecnología Intel® Hyper Threading (tecnología Intel® HT):	Ja
Tecnología Intel® Turbo Boost:	2.0
Tecnología de vídeo Intel® Quick Sync:	Ja
Tecnología Intel® InTru™ 3D:	Ja
Tecnología Intel® Clear Video HD (Intel® CVT HD):	Ja
Intel® Insider™:	Ja
Acceso a la memoria Intel® Flex:	Nee
Nuevas instrucciones Intel® AES (Intel® AES-NI):	Ja
Tecnología Intel SpeedStep mejorada:	Ja
Ejecutar bit de desactivación:	Ja
Estados inactivos:	Ja
Tecnologías de monitoreo térmico:	Ja
Configuración de CPU (máx.):	1
Estado de parada mejorado Intel®:	Ja
Tecnología Intel® Clear Video para dispositivos móviles con Internet (Intel® CVT para MID):	Nee
Intel® VT-x con tablas de páginas extendidas (EPT):	Ja
Opciones integradas disponibles:	Nee
Clave segura Intel®:	Ja
Intel® 64:	Ja
Tecnología de virtualización Intel® para E/S dirigida (VT-d):	Nee
Tecnología Intel® Clear Video:	Nee
Tecnología de virtualización Intel® (VT-x):	Ja
Tamaño del paquete del procesador:	40 x 24 x 1.5 mm
Procesador libre de conflictos:	Ja
Tecnología Intel® de protección de identidad (Intel® IPT):	Ja
Versión de la tecnología de protección de identidad Intel®:	1.00
Versión de la tecnología Intel® Secure Key:	1.00
Procesador de identificación ARK:	75459
Tecnología de ejecución confiable Intel®:	Nee
El Intel® TSX:	Nee
Versión Intel® TSX-NI:	0.00
Tecnología antirrobo Intel® (Intel® AT):	Ja
Tecnología Intel® Smart Connect:	Ja
Conexión de estación base:	Nee
Puerto combinado para auriculares/micrófono:	Ja
Ranura para tarjeta inteligente:	Nee
Frecuencia turbo máxima del procesador:	2.6 GHz
Código de procesador:	SR170
Dispositivo señalador:	Touchpad
Teclas de Windows:	Ja
Adaptador de CA, voltaje de salida:	19 V
Adaptador de CA, potencia de salida:	3.42 A
Factor de forma de memoria:	On-board + SO-DIMM
El número de discos duros instalados.:	1
Capacidad del disco duro:	1000 GB
Velocidad de rotación del disco duro:	5400 RPM
Paridad del FSB:	Nee
Procesador de bus frontal:	- MHz
Conmutación basada en la demanda Intel®:	Nee
Tipo de puerto de carga:	DC-in ingang
Tipo CardBus Ranura PCMCIA:	Nee
Serie de procesadores:	Intel Core i5-4200 Mobile series
Ranura para tarjeta Express:	Nee
Salida S/PDIF:	Nee
Altura (frente):	24.8 mm
Altura (trasera):	31.7 mm
Tecnología Intel® con capacidad de pantalla dual:	Nee
Tecnología Intel® IED:	Nee
Tecnología de almacenamiento rápido Intel®:	Ja
Acceso rápido a la memoria Intel®:	Nee
Peso (modo tableta):	31.7 g
Audio de alta definición Intel® (Audio Intel® HD):	Ja
Versión de la tecnología Intel® Smart Connect:	1.00
Número de conectores SATA III:	4
Versión del firmware Intel® ME:	9.5
Wifi.:	Ja
Tipo-producto:	Notebook
Tecnología de almacenamiento en matriz Intel® (Intel® MST):	Nee
Número de celdas de batería:	4
Generación de procesador:	Vierde generatie Intel® Core™ i5
Número total de conectores SATA:	4
Batterijcapaciteit:	37 Wh