Whirlpool OMR555RR0X Manual de Usario

Whirlpool horno OMR555RR0X

Lee a continuación 📖 el manual en español para Whirlpool OMR555RR0X (20 páginas) en la categoría horno. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/20

Quick guide

SLIDING SHELVES AND SHELF GUIDES

Before using the oven remove the protective tape [a] and then

remove the protective foil [b] from the sliding runners.

REMOVING THE SLIDING RUNNERS [c]

Pull the lower part of the sliding runner to uncouple the lower

hooks (1) and pull the the sliding runners upwards, removing

them from the upper hooks (2).

REFITTING THE SLIDING RUNNERS [d]

Hook the upper hooks on the shelf guides (1) then press the

lower part of the sliding runners against the shelf guides, until

the lower hooks are clicking (2).

[c] [d]

REMOVING AND REFITTING THE SHELF GUIDES

1. To remove the shelf guides, rmly grip the external part of

the guide, and pull it towards you to extract the support and

the two internal pins from the lodging.

2. To reposition the shelf guides, position them near the cavity

and initially insert the two pins into their lodgings. Next,

position the external part near its lodging, insert the support,

and rmly press towards the wall of the cavity to make sure

the shelf guide is properly secured.

FIRST TIME USE

1. SETTING THE TIME

You will need to set the time when you switch on the

appliance for the rst time: Press until the icon and the

two digits for the hour start ashing on the display.

Use or to set the hour and press to conrm. The

two digits for the minutes will start ashing. Use or to

set the minutes and press to conrm.

Please note: When the icon is ashing, for example following

lengthy power outages, you will need to reset the time.

2. SET THE POWER CONSUMPTION

By default the oven is programmed to work at a power

higher than 3 kW (Hi): To operate the oven at a power that is

compatible with a domestic power supply less than 2,9 kW

(Lo), you will need to change the settings.

To go to the change menu, turn the selection knob to ,

then turn it back to .

CONTROL PANEL DESCRIPTION

1 32 4 5 6

1. SELECTION KNOB

For switching the oven on by selecting

a function. Turn to position to switch

the oven o.

2. LIGHT

With the oven switched on, press

to turn the oven compartment lamp on

or o.

3. SETTING THE TIME

For accessing the cooking time settings,

delayed start and timer.

For displaying the time when the oven

is o.

4. DISPLAY

5. ADJUSTMENT BUTTONS

For changing the cooking time settings.

6. THERMOSTAT KNOB

Turn to select the temperature you require

when activating manual functions.

Please note: Type of knobs may vary from

model type. If the knobs are push-activated,

push down on the center of the knob to

release it from seating.

THANK YOU FOR BUYING A WHIRLPOOL

PRODUCT

In order to receive a more complete

assistance, please register your product on

www . whirlpool . eu/register

Before using the appliance carefully read the Safety

Instruction.

FUNCTIONS & DAILY USE

CONVENTIONAL

For cooking any kind of dish on one shelf only.

RISING

For helping sweet or savoury dough to rise eectively.

Turn the thermostat knob to the icon to activate this function.

CONVECTION BAKE

For cooking dierent foods that require the same

cooking temperature on several shelves (maximum three) at

the same time. This function can be used to cook dierent

foods without odours being transferred from one food to

another.

PIZZA

For baking dierent types and sizes of pizza and bread.

It is a good idea to swap the position of the baking trays

halfway through cooking.

ECO CONVECTION BAKE

For cooking roasts and stued roasting joints on a

single shelf. Food is prevented from drying out excessively by

gentle, intermittent air circulation.

When this ECO function is in use, the light will remain

switched o during cooking but can be switched on again by

pressing .

GRILL

For grilling steaks, kebabs and sausages, cooking

vegetables au gratin or toasting bread.

When grilling meat, we recommend using a DRIP TRAY to

collect the cooking juices: position the pan on any of the

levels below the wire shelf and add 200 ml of drinking water.

TURBO GRILL

For roasting large joints of meat (legs, roast beef,

chicken). We recommend using a DRIP TRAY to collect the

cooking juices: position the pan on any of the levels below the

wire shelf and add 200 ml of drinking water.

FLEXI CLEAN PACK

SMAR TCLEAN

The action of the steam released during this special

low-temperature cleaning cycle allows dirt and food residues

to be removed with ease. To activate the “Smart Clean”

function, pour 100-120ml of drinking water on the bottom

of the oven and only then turn the selection knob and

the thermostat knob to the icon. Activate the function

when the oven is cold. The position of the icon . Does not

correspond to the temperature reached during the cleaning

cycle.

AUTOMATIC CLEANING - PYRO

For eliminating cooking spatters using a cycle at very

high temperature. To activate this function move thermostat

knob to .

The position of the icon does not correspond to the real

temperature reached during the cleaning cycle.

1. SELECT A FUNCTION

To select a function, turn the selection knob to the symbol

for the function you require: the display will light up and an

audible signal will sound.

2. ACTIVATE A FUNCTION

MANUAL

To start the function you have selected, turn the thermostat

knob to set the temperature you require.

Please note: During cooking you can change the function by

turning the or adjust the temperature by turning the selection knob

thermostat knob. The function will not start if the thermostat knob

will be on position. You can set the cooking time, cooking

end time (only if you set a cooking time) and a timer.

RISING

To start the “Rising” function, turn the thermostat knob

to Rising position (40 deg) and put function knob in

Conventional position; if the oven is set to a dierent

temperature, the function will not start.

Please note: You can set the cooking time, cooking end time (only if

you set a cooking time) and a timer.

3. PREHEATING AND RESIDUAL HEAT

Once the function starts, an audible signal and a ashing icon

on the display indicate that the preheating phase has

been activated.

At the end of this phase, an audible signal and the xed icon

on the display will indicate that the oven has reached

the set temperature: at this point, place the food inside and

proceed with cooking.

Please note: Placing the food in the oven before preheating has

nished may have an adverse eect on the nal cooking result.

Press and hold and for ve seconds immediately

afterwards.

Use or to change the setting, then press and hold for

at least two seconds to conrm.

3. HEAT THE OVEN

A new oven may release odours that have been left behind

during manufacturing: this is completely normal.

Before starting to cook food, we therefore recommend heating

the oven with it empty in order to remove any possible

odours. Remove any protective cardboard or transparent lm

from the oven and remove any accessories from inside it.

Heat the oven to 250 °C for about one hour. The oven must be

empty during this time.

Please note: It is recommended to ventilate the room after using

the appliance for the rst time.

After cooking and with the function deactivated, the icon

may continue to remain visible on the display even after the

cooling fan has switched o to indicate that there is residual

heat in the compartment.

Please note: The time after which the icon switches o varies

because it depends on a series of factors such as ambient

temperature and function used. In any case, the product should be

considered to be o when the pointer on the selection knob is at

“0”.

4. PROGRAMMING COOKING

You will need to select a function before you can start

programming cooking.

DURATION

Keep pressing until the icon and “00:00” start ashing

on the display.

Use or to set the cooking time you require, then press

to conrm.

Activate the function by turning the thermostat knob to the

temperature you require: an audible signal will sound and the

display will indicate that cooking is complete.

Please note: To cancel the cooking time you have set, keep pressing

until the icon starts ashing on the display, then use to

reset the cooking time to “00:00”. This cooking time includes a

preheating phase.

PROGRAMMING THE END COOKING TIME/

DELAYED START

After a cooking time has been set, starting the function can be

delayed by programming its end time: press until the

icon and the current time start ashing on the display.

Use or to set the time you want cooking to end and

press to conrm.

Activate the function by turning the thermostat knob to the

temperature you require: the function will remain paused until

it starts automatically in time calculated based on selected

cooking end time.

Please note: To cancel the setting, switch the oven o by turning

the selection knob to position.

Delay to start functionality is not available for Grill and Turbo

Grill functions.

END OF COOKING

An audible signal will sound and the display will indicate that

the function has nished.

Turn the selection knob to select a dierent function or to

to switch the oven o.

Please note: If the timer is active, the display will show “END”

alternately with the remaining time.

5. SETTING THE TIMER

This option does not interrupt or program cooking but

allows you to use the display as a timer, either during while a

function is active or when the oven is o.

Keep pressing until the icon and “00:00” start ashing

on the display.

Use or to set the time you require and press to

conrm. An audible signal will sound once the timer has

nished counting down the selected time.

Notes: To cancel the timer, keep pressing until the icon

starts ashing, then use to reset the time to “00:00”.

6. AUTOMATIC CLEANING FUNCTION – PYRO

Do not touch the oven during the Pyro cycle.

Keep children and animals away from the oven during

and after running the Pyro cycle, until the room has

nished airing.

Remove all accessories - including shelf guides - from the oven

before activating the function. If the oven is installed below

a hob, make sure that all the burners or electric hotplates are

switched o while running the selfcleaning cycle.

For optimum cleaning results, remove excessive residuals

inside the cavity and clean the inner door glass before using

the pyrolytic function.

Avoid activating the pyro cycle cleaning in the presence of

limescale residues.

We recommend only running the Pyro function if the

appliance contains heavy soiling or gives o bad odours

during cooking.

To activate the automatic cleaning function, turn the selection

knob and the thermostat knob to the icon. The function

will be activated automatically, the door locked and the light

inside the oven switched o: The display will show the time

remaining to the end, alternating with “Pyro”.

Once the cycle has been completed, the door remains locked

until the temperature inside the oven has returned to a safe

level. Air the room during and after running the Pyro cycle.

Especificaciones del producto

Marca:	Whirlpool
Categoría:	horno
Modelo:	OMR555RR0X

¿Necesitas ayuda?

Si necesitas ayuda con Whirlpool OMR555RR0X haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

horno Whirlpool Manuales

Whirlpool AKP 548 Manual de Usario

22 Octubre 2024

Whirlpool ACMT 5131 Manual de Usario

20 Octubre 2024

Whirlpool ACM 703/LX Manual de Usario

18 Octubre 2024

Whirlpool RC8536XTB2 Manual de Usario

18 Octubre 2024

Whirlpool AKP 159/IX Manual de Usario

16 Octubre 2024

Whirlpool RC8300XKH Manual de Usario

14 Octubre 2024

Whirlpool AKZM 8421 H Manual de Usario

14 Octubre 2024

Whirlpool W6 OM4 4S1 P BSS Manual de Usario

14 Octubre 2024

Whirlpool AKZ 440/IX Manual de Usario

11 Octubre 2024

Whirlpool ACM 790/NE Manual de Usario

9 Octubre 2024

horno Manuales

Últimos horno Manuales

Continental Edison CECM6065W Manual de Usario

27 Octubre 2024

Taurus HM778WHD Manual de Usario

27 Octubre 2024

Lacanche CITEAUX Manual de Usario

27 Octubre 2024

JennAir JDS1450FS Manual de Usario

27 Octubre 2024

Orima ORP-76-IN Manual de Usario

27 Octubre 2024

Breville the Handy Hot Plate BHP150 Manual de Usario

27 Octubre 2024

JennAir JGRP436HL Manual de Usario

27 Octubre 2024

Neff C17MS22G1 Manual de Usario

27 Octubre 2024

Pit Boss BK24 Manual de Usario

27 Octubre 2024

Guzzanti GZ-8206 Manual de Usario

27 Octubre 2024