Whirlpool UXB1200DYS Manual de Usario

Whirlpool campana extractora UXB1200DYS

Lee a continuación 📖 el manual en español para Whirlpool UXB1200DYS (12 páginas) en la categoría campana extractora. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/12

INSTALLATION INSTRUCTIONS

600 CFM AND 1200 CFM INTERNAL BLOWERS

FOR RANGE HOODS

INSTRUCTIONS D'INSTALLATION

VENTILATEURS INTERNES AVEC DÉBIT DE 600 PI³/MIN ET

1200 PI³/MIN POUR HOTTES D’ÉVACUATION

RANGE HOOD SAFETY

LI3ZJB / W10331012B

Table of Contents/Table des matières

RANGE HOOD SAFETY .................................................................1

INSTALLATION REQUIREMENTS ................................................3

Tools and Parts ............................................................................3

INSTALLATION INSTRUCTIONS ..................................................3

Prepare Internal Blower System ..................................................3

Install Range Hood Blower Motor................................................4

ASSISTANCE OR SERVICE...........................................................5

In the U.S.A...................................................................................5

In Canada .....................................................................................5

WARRANTY.....................................................................................6

SÉCURITÉ DE LA HOTTE DE CUISINIÈRE .............................7

EXIGENCES D'INSTALLATION.................................................9

Outils et pièces.........................................................................9

INSTRUCTIONS D’INSTALLATION .......................................... 9

Préparation du système de ventilation interne ........................ 9

Installation du moteur du ventilateur de la hotte ................... 10

ASSISTANCE OU SERVICE.....................................................11

Au Canada.............................................................................. 11

GARANTIE................................................................................. 12

You can be killed or seriously injured if you don't immediately

You can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

IMPORTANT: READ AND SAVE THESE INSTRUCTIONS.

FOR RESIDENTIAL USE ONLY.

IMPORTANT : LIRE ET CONSERVER CES INSTRUCTIONS.

POUR UTILISATION RÉSIDENTIELLE UNIQUEMENT.

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK, OR INJURY TO PERSONS, OBSERVE THE

FOLLOWING:

■ Use this unit only in the manner intended by the

manufacturer. If you have questions, contact the

manufacturer.

■ Before servicing or cleaning the unit, switch power off at

service panel and lock the service disconnecting means to

prevent power from being switched on accidentally. When

the service disconnecting means cannot be locked,

securely fasten a prominent warning device, such as a tag,

to the service panel.

■ Installation work and electrical wiring must be done by

qualified person(s) in accordance with all applicable codes

and standards, including fire-rated construction.

■ Do not operate any fan with a damaged cord or plug.

Discard fan or return to an authorized service facility for

examination and/or repair.

■ Sufficient air is needed for proper combustion and

exhausting of gases through the flue (chimney) of fuel

burning equipment to prevent backdrafting. Follow the

heating equipment manufacturer's guideline and safety

standards such as those published by the National Fire

Protection Association (NFPA), the American Society for

Heating, Refrigeration and Air Conditioning Engineers

(ASHRAE), and the local code authorities.

■ When cutting or drilling into wall or ceiling; do not damage

electrical wiring and other utilities.

■ Ducted fans must always be vented outdoors.

CAUTION: For general ventilating use only. Do not use

to exhaust hazardous or explosive materials and vapors.

CAUTION: To reduce risk of fire and to properly exhaust

air, be sure to duct air outside - do not vent exhaust air into

spaces within walls or ceilings, attics or into crawl spaces,

or garages.

WARNING: TO REDUCE THE RISK OF FIRE, USE ONLY

METAL DUCTWORK.

WARNING: TO REDUCE THE RISK OF A RANGE TOP

GREASE FIRE:

■ Never leave surface units unattended at high settings.

Boilovers cause smoking and greasy spillovers that may

ignite. Heat oils slowly on low or medium settings.

■ Always turn hood ON when cooking at high heat or when

flambeing food (i.e. Crepes Suzette, Cherries Jubilee,

Peppercorn Beef Flambé).

■ Clean ventilating fans frequently. Grease should not be

allowed to accumulate on fan or filter.

■ Use proper pan size. Always use cookware appropriate for

the size of the surface element.

WARNING: TO REDUCE THE RISK OF INJURY TO

PERSONS IN THE EVENT OF A RANGE TOP GREASE

FIRE, OBSERVE THE FOLLOWING:a

■ SMOTHER FLAMES with a close fitting lid, cookie sheet, or

metal tray, then turn off the burner. BE CAREFUL TO

PREVENT BURNS. If the flames do not go out

immediately, EVACUATE AND CALL THE FIRE

DEPARTMENT.

■ NEVER PICK UP A FLAMING PAN - you may be burned.

■ DO NOT USE WATER, including wet dishcloths or towels -

a violent steam explosion will result.

■ Use an extinguisher ONLY if:

– You know you have a class ABC extinguisher, and you

already know how to operate it.

– The fire is small and contained in the area where it

started.

– The fire department is being called.

– You can fight the fire with your back to an exit.

aBased on "Kitchen Fire Safety Tips" published by NFPA.

■ WARNING: To reduce the risk of fire or electrical shock,

do not use this fan with any solid-state speed control

device.

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed

here.

Tools needed

■Phillips screwdriver

Parts supplied (600 CFM models)

Remove parts from packages. Check that all parts are included.

■Blower assembly

■Motor support bracket

■Motor spring clip

■2 - 6 x 1 mm nuts

■5 - 4.2 x 8 mm screws

■2 - 6 x 16 mm screws

■2 - 6.4 x 11 mm lock washers

■T-20 Torx®†

adapter

Parts supplied (1200 CFM models)

Remove parts from packages. Check that all parts are included.

■Blower assembly

■Motor support bracket

■Motor spring clip

■5 - 6 x 1 mm nuts

■5 - 4.2 x 8 mm screws

■5 - 6 x 16 mm screws

■5 - 6.4 x 11 mm lock washers

■T-20 Torx®†

adapter

INSTALLATION INSTRUCTIONS

Prepare Internal Blower System

IMPORTANT: Perform steps 1-4 before mounting the range

hood.

1. Remove grease filters from range hood. See the “Range

Hood Care” section in the Use and Care Guide.

2. Install the motor support bracket using three 4.2 x 8 mm

screws. Screw bracket to the inside top or back (alternate

location on some models), toward the left side of the range

hood.

3. Install motor spring clip using two 4.2 x 8 mm screws. Screw

spring clip to the inside top or back (alternate location on

some models) of the range hood at the proper location for the

selected motor system. Slide the mounting tab of the spring

clip through the slot in the panel and secure with the screws.

Use the inside set of mounting holes for the single motor

system. Use the outside set of mounting holes for the dual

motor system.

†®TORX is a registered trademark of Saturn Fasteners, Inc.

A. 4.2 x 8 mm screws (3) for motor support bracket

B. 4.2 x 8 mm screws (2) for motor spring clip

C. Motor support bracket

D. Motor spring clip (single motor assembly location)

E. Motor spring clip (dual motor assembly location)

D E

Especificaciones del producto

Marca:	Whirlpool
Categoría:	campana extractora
Modelo:	UXB1200DYS
Color del producto:	Green, Black, White
Peso.:	127 g
Ancho:	158 mm
Profundidad:	72 mm
Altura:	186 mm
Tecnología de conectividad:	Bedraad
Método de uso:	Hoofdband
Impedancia:	150 Ohm
Colocar los auriculares de los altavoces.:	Circumaural
Rango de frecuencia de los auriculares:	10 - 24000 Hz
Conector de 3,5 mm:	Ja
Sensibilidad de los auriculares:	85 dB
Potencia-máxima-de-entrada:	100 mW
Diámetro del altavoz:	40 mm
tipo de imán:	Neodymium
Tipo-producto:	Hoofdtelefoons