Whirlpool WCG51US0DB Manual de Usario

Whirlpool horno WCG51US0DB

Lee a continuación 📖 el manual en español para Whirlpool WCG51US0DB (16 páginas) en la categoría horno. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/16

W10648064A

THANK YOU for purchasing this high-quality product. Register your cooktop at www.whirlpool.com. In Canada, register your cooktop

at www.whirlpool.ca

For future reference, please make a note of your product model and serial numbers. These numbers can be found on the label located

on the bottom of the cooktop.

Model Number.......................................................................

Serial Number........................................................................

User Guide

Gas Cooktop

You can be killed or seriously injured if you don’t immediately follow instructions.

You can be killed or seriously injured if you don’t follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the

instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

DANGER

WARNING

WARNING: If the information in this manual is not followed exactly, a fire or explosion

may result causing property damage, personal injury or death.

–Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any

other appliance.

–WHAT TO DO IF YOU SMELL GAS:

•Do not try to light any appliance.

•Do not touch any electrical switch.

•Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

•If you cannot reach your gas supplier, call the fire department.

–Installation and service must be performed by a qualified installer, service agency or the

gas supplier.

•Do not use any phone in your building.

WARNING: Gas leaks cannot always be detected by smell.

Gas suppliers recommend that you use a gas detector approved by UL or CSA.

For more information, contact your gas supplier.

If a gas leak is detected, follow the “What to do if you smell gas” instructions.

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock, injury to

persons, or damage when using the cooktop, follow basic

precautions, including the following:

■ WARNING: NEVER use this appliance as a space heater to

heat or warm the room. Doing so may result in carbon monoxide

poisoning and overheating of the cooktop.

■ CAUTION: Do not store items of interest to children in

cabinets above the cooktop – children climbing on the cooktop

to reach items could be seriously injured.

■ Proper Installation – The cooktop, when installed, must be

electrically grounded in accordance with local codes or, in the

absence of local codes, with the

National Electrical Code,

ANSI/NFPA70 or the Canadian Electrical Code, Part 1

. Be sure

the cooktop is properly installed and grounded by a qualified

technician.

■ This cooktop is equipped with a three-prong grounding plug for

your protection against shock hazard and should be plugged

directly into a properly grounded receptacle. Do not cut or

remove the grounding prong from this plug.

■ Disconnect the electrical supply before servicing the cooktop.

■ Injuries may result from the misuse of the cooktop such as

stepping, leaning, or sitting on the top surface.

■ Maintenance – Keep cooktop area clear and free from

combustible materials, gasoline, and other flammable vapors

and liquids.

■ Storage on the cooktop – Flammable materials should not be

stored on or near surface units.

■ Top burner flame size should be adjusted so it does not extend

beyond the edge of the cooking utensil.

KEY USAGE TIPS

LP Gas Conversion

IMPORTANT: This cooktop is factory set for use with Natural gas. If

you wish to use Liquid Propane (LP), call a licensed professional to

install the LP gas conversion kit (included).

Placement of Burner Heads and Caps

All burner caps and burner bases should be properly installed BEFORE

operating the cooktop. Check that each burner has the right size head

and cap.

Refer to the “Assembling Your Cooktop” section for proper burner head

placement details.

Lighting the Burners

IMPORTANT: All burners will click/spark when a knob is pushed in. A

burner will light only if the knob is pushed in then turned

counterclockwise to IGNITE.

To light the burners:

1. Push in the knob.

2. Turn the knob counterclockwise to IGNITE. Wait until you see a

flame.

3. Turn the knob anywhere between Hi and Lo to the desired setting.

Power failure: In case of a power failure, burners can be lit manually.

Hold a lit match near the burner and turn the knob counterclockwise to

IGNITE.

Cleaning the Burner: Tips

The burners should be kept clean. Spillovers should be cleaned

immediately since they can clog the openings in the burners.

IMPORTANT: Before cleaning, make sure all controls are off and the

cooktop is cool. For more information, see the “Care and Cleaning”

section.

■Remove the burner cap from the base. Clean the burner cap with

hot soapy water and then rinse it.

■Remove the burner base and clean the

gas tube opening under the base.

■Clean clogged burner ports with a

straight pin, needle or small-gauge wire

as shown. Do not use a wooden

toothpick or clean in the dishwasher.

■Gently clean the igniter with a damp

cloth.

Assembling the Burners

Check your model number. Then refer to the following for information specific to your burners.

Burner Head Placement

■Burner caps and heads are included with your cooktop.

■Always match the burner head size to the cap size.

■Always line up the hole in the burner head to the electrode.

■The cooktop comes with an extra Melt cap on WCG9 series

models. This is a large cap with “MELT” and “FOR SMALLEST

BURNER” printed on it. Use this cap over the smallest burner only.

■Standard, SpeedHeat™ and FlexHeat™ burners are similar in

assembly. Note that there is no hole in the FlexHeat™ dual flame

burner head to insert the electrode. The FlexHeat™ burner

electrode (C) aligns with the semicircle notch in the head (B).

Grate Placement

To install the grates, align the feet on the center grate with the indents

on the cooktop. Then install the 2 outer grates by aligning the tabs on

the center grate with the slots in the outer grates. Be sure to line up the

slots and tabs for proper grate alignment.

ASSEMBLING YOUR COOKTOP

B C

WCG51US0D and WCG75US0D

A. SpeedHeat™ burner

B. Standard burner

C. Standard burner

D. Accusimmer® burner

WCG51US6D

A. Standard burner

B. SpeedHeat™ burner

C. Accusimmer® burner

D. Standard burner

E. Standard burner

WCG9

A. Standard burner

B. FlexHeat™ burner

C. Accusimmer® Plus burner

D. Standard burner

E. Standard burner

Standard and

SpeedHeat™ Burners

A. Cap

B. Head

C. Electrode

FlexHeat™ Burner

A. Cap

B. Head

C. Electrode

A. Outer grate slot

B. Center grate tab

Especificaciones del producto

Marca:	Whirlpool
Categoría:	horno
Modelo:	WCG51US0DB
Color del producto:	Antraciet
Ancho:	58 mm
Profundidad:	103 mm
Altura:	37 mm
Fuente-de-alimentación:	Batterijen
Instrucciones:	Ja
factor vorm:	Ambidextrous
Banda de frecuencia:	2.4 GHz
Número soportado de baterías/baterías:	2
Destinado a:	Kantoor
Uso recomendado:	PC/notebook
Rango de conexión:	8 m
Número de botones:	3
Conexión:	RF Draadloos
Color de superficie:	Monochromatisch
Tipo de desplazamiento:	Wiel
Resolución de movimiento:	1200 DPI
Receptor suministrado:	Ja
tipo de botones:	Drukknoppen
Tecnología de detección de movimiento:	Optisch
Número de ruedas de desplazamiento:	1
Direcciones de desplazamiento:	Verticaal
Interfaz de receptor inalámbrico:	USB Type-A
Tipo de receptor:	Nano-ontvanger
Baterias-incluidas:	Ja
Tipo de Batería:	AAA